Ingeniería Inversa, La Ingeniería De Diseño, Ingeniería Inversa Proceso

Related Articles
Related Q&A

<h1>Ingeniería Inversa, La Ingeniería De Diseño, Ingeniería Inversa Proceso</h1>Author: <a title="Ryan Rounder" href="http://www.articlesbase.com/authors/ryan-rounder/56818.htm">Ryan Rounder</a> Hobart, Washington USA (Articles Base) July 18, 2008
 
The Reverse Engineering is a new webpage that was just added to the new Engineering Design Website that has just been released. This new Reverse Engineering Process webpage has all of the information you need to know of Reverse Engineering and Engineering Design and the main information you need to know on Prototype Design. You can visit this Reverse Engineering Process webpage at: <a href="http://www.prototypezone.com/prototype/"><a target="_blank" href="http://www.prototypezone.com/reverse-engineering/">http://www.prototypezone.com/reverse-engineering/</a></a>
 
Here is an excerpt from the new Reverse Engineering and Engineering Design webpage:
 
“‘Reverse Engineering’ of ‘mechanical devices’ : With the ever-increasing popularity of CAD, ‘reverse engineering’ has proven to be a blessing for creation of ‘3D virtual model’ of the on hand physical part to be used in 3D CAE, CAM, CAD and many other soft wares. The measuring of physical object can be done by making use of ‘#D scanning technologies’ such as computed tomography, ‘structured light digitizers’, laser scanners, and CMMs. The data that is measured usually gets represented as ‘point cloud’. It is devoid of topological information. That’s why, the processing and modelling takes place into usable format like a ‘triangular faced mesh’, CAD model, or a collection of surfaces of NURBS. Applications such as Polyworks, Image ware, Geomagic, or Rapidform are used for processing the ‘point clouds’ into the formats that can be used in applications like 3D CAE, CAM, CAD or visualization.
 
‘Reverse Engineering’ of ‘software’ : The term ‘reverse engineering’ differs from person to person when applied in terms of software. As per the research conducted by Cross and Chikofsy, reverse engineering can be referred to as the process that involves the analysis of the subject system for creating its representation at the higher level. This level might be called the ‘level of abstraction’.”
 
The new Reverse Engineering Rapid Prototype page is free information to members and non-members and can be found at: <a href="http://www.prototypezone.com/"><a target="_blank" href="http://www.prototypezone.com/">http://www.prototypezone.com/</a></a>. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at: <a href="http://www.prototypezone.com/prototype-forum"><a target="_blank" href="http://www.prototypezone.com/prototype-forum">http://www.prototypezone.com/prototype-forum</a></a>
 
About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.About the Author: Author: Ryan Rounder, Director of PR 
Email: <a href="mailto:Pressreleases@prototypezone.com">Pressreleases@prototypezone.com</a> 
Website URL: <a target="_blank" href="http://www.prototypezone.com">http://www.prototypezone.com</a> 
Phone: 425-503-8401 
City/State: Seattle, WashingtonArticle Source: <a href="http://www.articlesbase.com/art-articles/ingeniera-inversa-la-ingeniera-de-diseo-ingeniera-inversa-proceso-488524.html" title="Ingeniería Inversa, La Ingeniería De Diseño, Ingeniería Inversa Proceso">http://www.articlesbase.com/art-articles/ingeniera-inversa-la-ingeniera-de-diseo-ingeniera-inversa-proceso-488524.html</a>

Hobart, Washington USA (Articles Base) July 18, 2008

The Reverse Engineering is a new webpage that was just added to the new Engineering Design Website that has just been released. This new Reverse Engineering Process webpage has all of the information you need to know of Reverse Engineering and Engineering Design and the main information you need to know on Prototype Design. You can visit this Reverse Engineering Process webpage at: http://www.prototypezone.com/reverse-engineering/

Here is an excerpt from the new Reverse Engineering and Engineering Design webpage:

“‘Reverse Engineering’ of ‘mechanical devices’ : With the ever-increasing popularity of CAD, ‘reverse engineering’ has proven to be a blessing for creation of ‘3D virtual model’ of the on hand physical part to be used in 3D CAE, CAM, CAD and many other soft wares. The measuring of physical object can be done by making use of ‘#D scanning technologies’ such as computed tomography, ‘structured light digitizers’, laser scanners, and CMMs. The data that is measured usually gets represented as ‘point cloud’. It is devoid of topological information. That’s why, the processing and modelling takes place into usable format like a ‘triangular faced mesh’, CAD model, or a collection of surfaces of NURBS. Applications such as Polyworks, Image ware, Geomagic, or Rapidform are used for processing the ‘point clouds’ into the formats that can be used in applications like 3D CAE, CAM, CAD or visualization.

‘Reverse Engineering’ of ‘software’ : The term ‘reverse engineering’ differs from person to person when applied in terms of software. As per the research conducted by Cross and Chikofsy, reverse engineering can be referred to as the process that involves the analysis of the subject system for creating its representation at the higher level. This level might be called the ‘level of abstraction’.”

The new Reverse Engineering Rapid Prototype page is free information to members and non-members and can be found at: http://www.prototypezone.com/. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at: http://www.prototypezone.com/prototype-forum

About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.

Author: Ryan Rounder, Director of PR
Email: Pressreleases@prototypezone.com
Website URL: http://www.prototypezone.com
Phone: 425-503-8401
City/State: Seattle, Washington

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/art-articles/ingeniera-inversa-la-ingeniera-de-diseo-ingeniera-inversa-proceso-488524.html

Article Tags: Prototipo, Ingeniería Inversa, La Ingeniería De Diseño, Diseño De Prototipos

Latest Art Articles
More from Ryan Rounder

Printing Leaves

By: Jenny Austin | 03/12/2008
Another technique you can try is to lay the leaf down with the painted side facing upwards then lay the paper, fabric or canvas to be printed on top of the leaf, in one firm movement press down on the leaf to create your print.

Cell Phone Lanyards – How to Secure Your Cell Phone With a Cell Phone Lanyard

By: Ricky Lim | 03/12/2008
You learn about people losing their cell phones all the time, so it’s not something uncommon. You can lose your cell phone by forgetting it on the table at a restaurant, dropping it from your pants when you get up from a seat or it can be stolen by someone without you noticing it.

Art Collecting: How to Get Started in the Trade of Art

By: Nicholas Tan | 03/12/2008
Being able to sell art is not an easy task. Even those people who are already art collectors are hesitant to be the first buyers from obscure or not so well known artists. Additionally, it is way more difficult to sell to people who are not really art collectors and do not know anything about you. However, once you get to make that first sale of your masterpiece, selling again would be a lot easier than before.

Art Collecting: Making Your Own Great Collection

By: Nicholas Tan | 03/12/2008
If you want to build your art collection, you should do so in an intelligent manner. This is so that everything you buy for your collection wouldn’t be considered as a waste of money. However, collecting art intelligibly would require you to master two things. First, is to have good research skills, and second the skill of collecting.

Art Collecting: Extra Tips on Selling Your Art

By: Nicholas Tan | 03/12/2008
Other than informing your prospective buyers on the basics of your artworks, how much you are selling them, and who are the people who have bought from you, there are still some other things you can do to make the probability of the sale hike up even higher. Here are some of them.

Art Collecting: Basics of Buying Art

By: Nicholas Tan | 03/12/2008
Buying and collecting art intelligently can be done by anyone. That's right, anyone. You do not need to have experience in collecting art, previous knowledge about the art business, or even a degree in art history. The truth is, all you’ll need is love for and appreciation of fine art; plus a yearning to collect; lastly, willingness to learn a some simple techniques that would help you evaluate any kind of art work coming from any period of history, whomever the artist is and whatever his or her nationality is.

Art Collecting: a Beginners Guide

By: Nicholas Tan | 03/12/2008
Art collection is a very stimulating and inspiring hobby for all. It isn’t just for the rich and famous, but even regular everyday people too. There are various forms of art that you can choose from, especially since art’s definition can greatly vary from one person to another. However, it doesn't really matter whatever its form is, you’re the one to make the call on which is attractive and how much are you willing to spend for such piece.

Pottery Art With a Long History V – the Tang Tri-colored Pottery in China (up)

By: Krista QQ(www.123giftfactory.com) | 03/12/2008
The Tang Tri-colored pottery was invented and popular in the Tang dynasty over 1300 years ago, the basic glaze colors of which are yellow, brown and green, and people laterly were customary to call this type of pottery as ”Tang tri-colored pottery".

Ingeniería Inversa, La Ingeniería De Diseño, Ingeniería Inversa Proceso

Printing Leaves

Cell Phone Lanyards – How to Secure Your Cell Phone With a Cell Phone Lanyard

Art Collecting: How to Get Started in the Trade of Art

Art Collecting: Making Your Own Great Collection

Art Collecting: Extra Tips on Selling Your Art

Art Collecting: Basics of Buying Art

Art Collecting: a Beginners Guide

Pottery Art With a Long History V – the Tang Tri-colored Pottery in China (up)

DIY Rapid Prototipe, La Impresora 3d, Bricolaje Y Rápida De Prototipos, Replicación

Rotocast, 3d Cad, 3d Impresión, Y Otros Servicios De Rapid Prototipe

Electron Beam Melting and Electronic Prototype Information

Prototipo Virtual, Virtual Prototipos, Y Todos Los Prototipos De Información Virtual

Reparto De Prototipos Y Precisa Reparto De Prototipos, Pcpro Y La Técnica

Prototipo De Moldeado Por Inyección, Moldeo Por Inyección De Termoplásticos, Inyección De Moldes

Laminados Objeto De Fabricación - Lom Información

Stereo Litografía Información Y Estereolitografía Sla Info