Chemical Physics Engineer
For additional information please refer to http://www.canadianblower.com.
Oleg Tchetchel, canadablower@canadablower.com
Canada Blower
http://www.canadablower.com
http://canadianblower.com/blowers/index.html
Canada Blower Co. is a major supplier of plastic and fiberglass fans and blowers for industry applications where aggressive media must be moved. Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.
Applications for Corrosion and Chemical Resistant Fans include:
* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical Labs
On most campuses there is a certain number of fume hoods that are used for various acids testing to break down materials for analysis. HCl and Perchloric Acid are the ones used most commonly. Fume hoods and Chemical resistant fans are needed.
* High Technology Semiconductors, PCBs, and Photonics
Chip makers use acids to clean metal before they mount thin film on the metal upon which they lay circuitry.
* Printed Circuit Board Industry
FRP fans are frequenly used for clean rooms.
* Waste water and Sewage Treatment Plants
Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor problem that has to be treated. Depending on the size of these stations corrosion resistant fans are needed. This gas can also be very volatile and will require explosion proof motor and static grounding of the fan housing by graphite impregnation that Canada Blower can provide too.
* Salt Air and High Humidity Environments
Any facility near the salt air is also a good place for plastic fans and the humidity will eat through metal fans.
* Steel and Wire Manufacturing
As the steel comes in and sits at these plants impurities and scale develop on the steel or the wire that needs to be cleaned off before the wire or steel can be properly worked with. Acid baths are needed for this and the corrosive fumes coming off these aced baths are highly corrosive...
* Stainless Steel and other Metal Production Facilities
In tha annealing and Pickling process acid baths are used to strip scale off the steel after the annealing process that smoothed out grain patterns that may have formed during the annealing process. Later on acids are used again to support oxidation.
* Chenical and Petrochemical Industries
* Jet Engine and Power Plant Turbine Manufacturing or Servicing
Molted Salt tanks are often used here to descale metals coming out of hot furnaces. Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid baths as does nickel plating.
* Electroplating and Metal Finishing
These industries use fiberglass fans and fume scrubbers.
* Scrubber OEMs and Designers
FRP fans are standard components in fiberglass srubber designs.
* Industrial Galvanizers
* Printing Press Service Shops
* Chromatography
* Food Processing
Often in the food processing industry they wash equipment down with acids and other corrosives. Also they use fans for the humidity that builds up from the drying process of foods.
* Pulp and Paper Industry
Pulp and paper manufacturers are very wide users of fiberglass and other plastics fans for their boilers, exhaust and filtration systems.
Canada Blower fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. Cnada Blower fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.
Canada Blower fiberglass fans housings are manufactured from premium grade, fire resistant resins that provide excellent corrosion resistance in most chemical environments. Canada Blower FRP impellers are made of premium vinyester that combines corrosion resistance with structural integrity under the stress of rotation.
Tough applications mean tough fans and blowers by Canada Blower. Canada Blower is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canada Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
- Related Videos
- Related Articles
- Ask / Related Q&A
- Frp and Plastic Fans, Blowers, Ventilators
- Fiberglass Fans, Blowers by Northen Industrial Co
- Inline FRP Fans and Ventilators
- Axial FRP Fans and Ventilators by Canada Blower
- Inline FRP Fans Blowers
- Plastic and Fiberglass Blowers and Fans by Canada Blower
- Fiberglass and Plastic Blowers and Fans by Canada Blower
- Fiberglass and Plastic Blowers and Fans by Tenderall Fan Co
Asset Management: Your Knowledge
By: Margaret Prusan | 16/11/2009As your business' CEO, your role is to grow your business, be the face of your business and develop new products or services.That means imparting your knowledge to your team so they can handle the day-to-day of your business without you.
What Buyers Should Know Before Purchashing A Minnesota Home
By: Gen Wright | 16/11/2009If you are thinking about purchasing a home in Minnesota there are a few things you should know. Here is a list of items that will help you to have a stress free home buying experience.
How Structural Analysis of Buildings works?
By: Mike Thomas | 16/11/2009Structural analysis is a method to monitor the considerable dependability of a structure of a building such as residential, commercial and industrial buildings. Know your building structure’s behavior now!!
The Wide Variety of Fire-Fighting Tools Offered By The Chubb Fire Extinguishers
By: Bennett Glover | 15/11/2009We all know what fire extinguishers are. They’re those red metal cylinders designed like gigantic grenades or oxygen tanks with a hose of a nozzle. We see them all the time in movies and TV shows being grabbed from behind a glass that says “Break glass in case of fire” and sprayed all over mantles of flame until they dissipate into nothingness.
Enigin Stay Competitive By Going Green - Energy Efficiency
By: Gen Wright | 15/11/2009Today, there is a heightened awareness of the damage that has been done to our environment. Many environmental campaigns and initiatives have brought our attention to the issues of global warming and climate changes.
Tele of the Two Security Industries
By: Romeo Richards | 14/11/2009Bearing in mind that my audience was made up of security managers, senior executives of the SIA and many of the trade organisations that purport to represent our security industry. It dawned upon me that ‘not all security professionals are created equal’.
step to bulid a small cleaning business
By: zee mack | 14/11/2009One of the main reasons people start businesses is to make money. For some it’s a blessing to make money doing something they love. I’m not saying that you have to love house cleaning in order to have a successful house cleaning business; however it would be a good idea if you didn’t hate it.
Ask Andrea…I am a Senior Level candidate and can’t seem to find a job – what should I do???
By: Andrea | 13/11/2009Job Qualifications are changing as rapidly as the markets themselves. A year ago everyone was desperate to hire the most technically savvy candidate they could find...
Air Curtains for Large Buildings Doors
By: Oleg Tchetchel | 17/09/2009 | EducationThe idea of having an invisible barrier across the doorway to enable unimpeded access yet effectively prevent temperature flow, dust, odours and insects to cross, is appealing in itself but add to this the cost-saving in reducing energy use and the idea becomes more compelling, especially as air curtains are relatively inexpensive items. Appropriate for industrial applications Keeping warm air out of insulated cold stores or refrigerated facilities
Design of Local Exhaust Systems for Industrial Air Cleaning
By: Oleg Tchetchel | 15/09/2009 | ScienceLocal exhaust ventilation systems are designed to capture airborne chemicals at the source of generation and remove contaminants from the work area. When a local exhaust system does its job your workers are healthy and productive.
Heavy Duty Industrial Process Air Curtains
By: Oleg Tchetchel | 14/09/2009 | HealthAn air door or air curtain is a device used for separating two spaces from each other, usually at the exterior entrance. The most common configuration for air curtains is a downward-facing blower fan mounted over an opening. Normally this opening is an entrance to a building, and the air curtain is intended to help keep flying insects out by creating forceful turbulence. It also helps keep outside air out, avoiding cold drafts by mixing-in warm air from the air curtain.
Air Blowoff Systems for Industry
By: Oleg Tchetchel | 11/09/2009 | Business IdeasBlower and fan units used in tank, blender, and conveyor tube drying can reduce drying time by an average of 50% compared with natural air drying. They are almost always a direct-drive design in order to minimize size and cost. However, an in-line electric heater must be added, and this ultimately raises both the cost and total power consumption. The final assembly still must be compact enough to mount on a portable cart to easily service multiple mixers, and this portability requirement limits
Air Curtains by Canadian Air Systems
By: Oleg Tchetchel | 10/09/2009 | Causes & OrganizationsAir curtains are widely accepted across North America and Europe as a standard fitment in public buildings, retail stores and industrial applications such as coolers, freezers and cold storage facilities. Air curtains are generally associated with retaining heat energy in cold climates, and the energy savings are substantial.
Air Make-Up by Industrial Air Handling Units
By: Oleg Tchetchel | 15/06/2009 | HealthMakeup air is vitally important to the health and welfare of a building and its occupants. If the proper amount of makeup air is not introduced into a space, consequences can range from exterior doors that are hard to open or close, to buildups of carbon monoxide in the space, to fume hoods that don't actually control the contaminants they were intended to control.
Industrial Direct-Fired Air Handling Units
By: Oleg Tchetchel | 12/06/2009 | International BusinessDirect-fired units utilize air that will be sent to the heated space for combustion without use of a heat exchanger. The products of combustion are mixed directly with large volumes of outdoor air. Such mixing is considered safe because of the high dilution ratio.
Industrial Air Handling Units for Air Temperature Control
By: Oleg Tchetchel | 04/06/2009 | KitchensDirect Gas-Fired Heating Systems may be built in a number of configurations. They may be curb mounted as horizontal rooftop systems with down or horizontal discharge or in a vertical configuration for mounting on a pad outside of a building, with air ducted to the interior. They may also be located inside a building, suspended from hangers or mounted on support steel. Various manufacturers can supply any physical configuration required.