Hugh Watson - Articles

 

Hugh Watson founded Innova Design in 2001 with a vision to provide the service designers require by fully exploiting the 3 dimensional design and manufacturing process. As design engineer himself Hugh felt that much time and money could be saved by building the company around a fully electronic workflow, enabling many of the frustrations of prototype and small batch machining to be overcome.

Innova Design & Build Limited, Unit 6, Beaver Industrial Estate, Southmoor Lane, Havant, Hampshire, PO9 1JW
Telephone: 023 92 452 500, Fax: 023 92 452 502, Email: , web site: www.innovadesign.co.uk

Why would you Machine your Enclosure?

If you are in need of an enclosure for your electronics and debating the pro's and con's of what to do, then here are some points for you to consider based on the latest machining techniques that may provide you with a better solution for no extra cost. Read

By: Hugh Watson | 27/03/2009 | Small Business

Designing Parts for Small Batch Machining

CNC Machining when combined with 3D CADCAM has revolutionised workshop practice in recent years. It has opened up a whole new world of possibilities for designers who are designing machined components which are intended to be produced in small or medium sized batches. In this article we discuss the changes and constraints from a designers point of view. Read

By: Hugh Watson | 28/11/2008 | Small Business

An Engineers Guide to Cnc Machining Cad/cam

An introduction to the development of Computer Numerical Control (CNC) machining from Numerical Control (NC) and how this innovation has altered the role of the machine operator. Read

By: Hugh Watson | 07/10/2008 | Small Business