Free Online Articles Directory
Home Page  john lee |
|||||
 |
Sort By: Date | Popularity
 Single Screw Extruder and Twin Screw ExtruderConventional single screw extruder is not suitable for WPC forming operation, because it processes the weak ability for material transmission and plasticization. The transmission affection of single screw extruder mainly depends on the role of friction. Features of Casting TapeThere are many features of casting tape:
1. Safety and comfort: A casting tape has a lower contraction after being dry compared with a plaster cast ,so that it will not lead to the feeling of hair tight, itching; discomfort also will not appear in the hardening process of gypsum recrystallization; Seamless Steel PipeSeamless steel pipe is a long steel pipe with hollow sections and has no joints surrounding the steel bar. It is mainly used as a pipeline to transfer the fluid, such as oil, natural gas, water and some solid materials, etc. As compared to the flexural torsional strength in the same light, it is an economic cross-section steel. Categories of RackingPlatform racking system refers to a rack that is built on the base of the existing workplace. To make full use of available space and meet actual demands, platform can be flexibly designed into one layer or multiple layers based on the design specifications of steel structures. General Knowledge of Seamless Steel PipeSeamless steel pipe is a long steel with hollow sections and has no joints surrounding the steel bar. It is mainly used as a pipeline to transfer the fluid, such as oil,natural gas,water and some solid materials,etc. As compared to the flexural torsional strength in the same light, it is an economic cross-section steel. Instructions of Car ChargerGenerally, the car charger of GPS, mobile phone is used with built-in voltage converter circuit which can convert it into voltage 5V to compatible with the USB interface, so that when the use of USB charging cable can be plugged into a computer USB port, and charged into the car. Analysis of the Advantages of Extruder with Switched Reluctance MotorThe screw of an extruder driven by switched reluctance motor can be operated through the gear of the motor, which can realize speed control under extrusion rate and the pressure. Generally, an extruder processes its own characteristics: wide range of speed adjustment, steady speed and high precision, small starting current, large starting torque. Due to a small heat-driven system, the occurrence of burning motor and controller is significantly reduced. Three-phase Car ChargerIn recent years, the widespread use of car chargers in electric vehicles is the so-called three-phase car charger. Design Project of Car ChargerA Car charger, which is conventionally used for power supply of vehicle battery(car:12V;truck:24V),has been widely applied to lithium battery of various portable and handheld devices, such as mobile phone, PDA, GPS, to name but a few. A Study on Screen Changer of ExtruderThere are impurities in most of the plastic materials, but they can be cleaned effectively by a screen changer, which is installed on the back of an extruder, and it is a kind of honey net, sharing the same diameter of the barrel for extrusion machine.
|
 |
|||
|
Article Categories
|
|
||||
|
|
|||||
