Free Online Articles Directory
Home Page  Kevin McMenamy |
|||||
 |
http://www.testwall.com offer a wide selection of Oscilloscope, Spectrum Analyser, Network Analyser, Logic Analyser, Signal Generator, used test equipment and more.
Sort By: Date | Popularity
 What You Need to Know About Spectrum AnalyzersSpectrum Analyzers generally are test equipment that you can use to measure waveforms based on their spectral composition. Waveform spectrum that can be analyzed with Spectrum Analyzers could be the power spectrum, the optical waveform spectrum, the acoustic waveform spectrum, and the electrical waveform spectrum. The Use of OscilloscopesYou may have seen oscilloscopes before without being aware of it – they are usually these boxes that are fitted with a display screen on which a grid pattern can be seen by which the signals being measured can be gauged properly. The grid is formally called a “graticule” and every square in the graticule is dubbed a ‘division”. Your oscilloscope box will also have a front panel on which different control buttons and knobs appear, along with various input connectors. The Basics and Features of Spectrum AnalyzerThe name spectrum analyzer is used to refer to the spectral analyzer instrument which is employed to measure a waveform spectrum – that applies to the waveforms of the optical waveform, the acoustic waveform, and the electrical waveform. At times, the spectrum analyzer might also be used to gauge the power spectrum. Selecting Used Test EquipmentWhat are used test equipment? Basically these are the electronic test equipment that have already been used by other technicians in the past. Electronic test equipment might sometimes be dubbed “testgear” and are used to determine whether certain electronic DUTs (Devices Under Test) are malfunctioning or still in working condition. How to Use an Electrical Network AnalyserElectrical networks can be measured and assessed using the electrical network analyser. Of special interest when using this network analyser are the electrical networks’ properties that pertain to reflection of electrical signals and subsequent transmission – these are called the S-parameters or scattering parameters. The usual operating frequencies of this network analyser start at nine kilohertz and reach up to 110 gigahertz.
|
 |
|||
|
Article Categories
|
|
||||
|
|
|||||
