Paul Collins

Rain gutters are a feature that virtually all houses share. Water, water everywhere. Gutter Materials : The metal stock from which the gutter is formed can be aluminum, galvanized steel, copper, or a hybrid version of one of these metals. Seamless gutters made of aluminum are the most common today. Why Seamless Gutters? : Seams are always possible leak points in a gutter system. Seamless gutters virtually eliminate this leakage problem.

Rain gutters have been a part of building design for centuries. Virtually every home needs rain gutters. Sections of gutter and downspouts were once made from sheet metal and assembled as a gutter system to a house. Almost 60 years ago people began applying roll forming to the manufacture of rain gutters. The seamless rain gutter was born. Gutter material is sold in coils. The drive system of the gutter machine pulls the flat material through a series of stages.

Seamless Gutter Machines : A seamless gutter machine is a type of roll forming machine that shapes flat metal coil stock to form a rain gutter. A machine designed to make a K-style gutter can produce only K-style gutters. The exact design of the gutter formed by different machines also varies. Machines are available that can produce 5-, 6-, or 7-inch-wide K-style gutters.

The second reason is to properly operate the machine so it will produce hi-quality gutter and avoid damage to the machine. A seamless gutter machine typically produces about 30 feet of gutter per minute. In most cases the gutter machine will have been transported to the worksite with a coil of material on the machine and then run through the machine. Remove the cover tarp from the machine, if present.

MAINTENANCE : Proper operation of a seamless gutter machine—and a long machine life—is highly dependent on regular maintenance and care given to the machine. All the machine manufacturers will tell you a machine can last 20, 25, or 30 years, perhaps even more. In the opinion of at least one machine manufacturer, the most successful gutter companies use an enclosed trailer, van, or truck to transport their gutter machines. Because it keeps your machine clean and dry.

Keep the machine clean. Regularly clean the machine and the rollers. If there are any signs of paint flakes from the gutter inside the machine, shut down immediately, correct the problem, and clean the machine before proceeding. Inspections: Carefully inspect sections of gutter from the machine and note any irregularities or defects. Regularly inspect the machine in accordance with the operating manual.

Starting a new business isn’t hard—thousands upon thousands of people do it every year. A major reason many new businesses fail is unrealistic expectations about what the business will produce. It is a mature product with a mature market. Lower prices (and lower profits), better quality, some specialized market niche? What? What is your business concept?

Industrial Downspout Machines: Several U.S. companies produce industrial-grade machines for roll forming downspouts. These machines are larger, heavier, and more expensive than portable roll forming machines. Artos produces standard pipe machines which can produce round pipe in sizes from 2-inch to 6-inch diameters, corrugated round pipe in 3-inch or 4-inch sizes, square corrugated pipe in 3-, 4-, or 5-inch sizes and 2x3 or 3x4 plain square pipe.