Siouzanna Terlitskaia - Articles

Ventilation by Exhaust Fans

An exhaust fan is a mechanical ventilation device that helps to draw out stale and impure air from your home and bring in fresh air, thereby improving the quality of indoor air. Exhaust fans are typically ducted to the exteriors of your house, through which bad indoor air can effectively be removed from your living space. Read

By: Siouzanna Terlitskaia | 15/10/2009 | Recycling

Building Ventilating per ASHARE Requirements

Many times odors are associated with chemical contaminants from inside or outside the office space, or from the building fabric. This is particularly noticeable following building renovation or installation of new carpeting. Out-gassing from such things as paints, adhesives, sealants, office furniture, carpeting, and vinyl wall coverings is the source of a variety of irritant compounds. In most cases, these chemical contaminants can be measured at levels above ambient (normal background). Read

By: Siouzanna Terlitskaia | 13/10/2009 | Science

Spark Resistant Ventilators by Canada Blower

The Hazardous Location fans incorporate spark proof construction in its design to minimize the potential for a random spark being the ignition source of an explosion in a hazardous location. All major components are fabricated from materials that will not produce a spark when struck by a direct impact blow i.e. aluminum propeller or blade and explosion proof motors. Read

By: Siouzanna Terlitskaia | 09/10/2009 | Organizational

High Pressure Side Channel Blowers

Regenerative blowers are oilless and have no complicated intake/exhaust valving. Most can be mounted in any plane and, with dynamically balanced impellers, generate little vibration. Because they are nonpositive displacement compressor/vacuum pumps, they discharge air that is clean and pulsation free, which are important considerations for today's plant instruments and controls. Read

By: Siouzanna Terlitskaia | 08/10/2009 | Branding

Selection of Right Axial Fan for Ventilation

The air delivering capacity of axial flow fans ranges from 100 to 500,000 cubic feet per minute (3,000 to 15,000 cubic meters per minute). Impellers usually have blades with airfoil cross-sections. Read

By: Siouzanna Terlitskaia | 07/10/2009 | Customer Service

Selecting Righ Fan for Building Ventilating

As with all fan systems, it is important to remember that only available air can be exhausted. Fans cannot operate in a vacuum. If the exhausted air cannot be replaced in the facility, fan performance will drop off and production will suffer. The production facility must have makeup air for every cubic foot that is exhausted from the facility. The makeup air can be provided through general ventilation systems or as part of a heating, ventilating and air conditioning system. Read

By: Siouzanna Terlitskaia | 02/10/2009 | Health

Roof Ventilators by Canada Blower

Proper ventilation requires that there be a movement or circulation of the air within the space and that the temperature and humidity be maintained within a range that allows adequate evaporation of perspiration from the skin. It was formerly believed that the discomfort, headache, and lethargy commonly associated with poor ventilation were caused entirely by the increase in the amount of carbon dioxide and the decrease in the oxygen content of the air. Read

By: Siouzanna Terlitskaia | 01/10/2009 | Education

Regenerative Blowers by Canada Blower Company

Canada Blower Co. has introduced many high pressure blower systems to achieve static pressure, previously unachievable by single stage centrifugal blowers. Read

By: Siouzanna Terlitskaia | 29/09/2009 | Business

Industrial Radial Fans by Canada Blower

A radial fan is used in so many different ways and usually run by using electricity although a radial fan can also run off a generator. Most households have a radial fan, there is generally some sort of fan found in most houses. A radial fan can be just your normal portable fan or a ceiling fan is normal is most humid areas. When you do have a ceiling fan it's important to note that most of them must be put in by an experienced electrician otherwise you could have some serious problems with the Read

By: Siouzanna Terlitskaia | 22/09/2009 | Automotive

Fans and Blowers for Industrial Process Ventilation

Air conditioning can often become too large of an expense for industrial areas, but the good news is that an industrial fan can bring some much needed relief in this case. Industrial electric fans can be quite helpful for places where heat stratification, dampness, and stagnant air become frequent problems. Also, for high static pressure an industrial fan is what you need. Also known as an industrial electric blower, these units replace air as well by blowing out the old and stagnant air. Read

By: Siouzanna Terlitskaia | 21/09/2009 | Business Opportunities