Auto Paint How To: A Basic Guide

| Posted: 20-12-2007 | Comments: 0 | Views: 328 | Rating: (81)

(?)

Whether you are just interested in re-spraying a small area to cover up some paint chips, or want to treat your car to a custom paint job that will let you enjoy envious stares from every pedestrian you pass, you will need to follow a few basic rules, and have the right tools to hand in order to carry out the work to a high standard.

The first thing to mention about auto paint jobs is that you should always work in a well ventilated area. Paint fumes can include a number of solvents that can leave you feeling light headed and even poison you if you inhale them, so make sure there is free passage of air through your work shop when you are painting. You should also wear a respirator mask during painting or preparation to avoid inhaling any paint and loose dust that you release.

To get the best effects when painting, you also need to make sure that you are able to keep dust to a minimum. You can achieve a good environment by hanging sheets from floor to ceiling in the area where you are working, and wearing overalls. You should also vacuum clean the area where you are painting at the beginning of every session.

When you apply auto body paint, the main thing is to get a good even finish that looks good, and the key to getting a good finish is having a good start. Preparation is everything in paining. Get it right, and you will be able to enjoy a fantastic smooth finish that will last for years and look great, skimp on your preparation, and your finish will look shabby straight away, and then get worse over time.

Before you paint, you need to strip off the old paint job. You can do this with a solvent based paint remover, or do it the hard way by sanding back the panels to bare metal using a sander. Whichever method you choose, you need to make sure that you have a very smooth base. To achieve this, use the finest grade abrasive paper available, and be prepared to put serious time into the job.

Once you are satisfied with your base, you can start applying the primer. Use a HLVP spray gun connected to an air compressor, as this is much more even than an aerosol, and will be much cheaper in the long run. You should use long sweeping strokes in a single direction to get a good base to paint onto. After every coat, allow the paint to dry, and then sand it back to a smooth surface. Then apply the next coat in strokes that go at 90 degrees to the previous layer, as this will produce an even color.

There are two types of auto paint that you can use on a car, cellulose based and Two Pack auto paint. Most painters now use Two Pack because it gives a better finish, and metallic colors are available, whereas cellulose paint can be tricky to deal with, and is best used on classic cars where you are trying to recapture an older style.

As with the primer, you should apply the auto paint in coats, spraying in a single direction, then sanding back to a fine surface to remove any imperfections, before applying the next layer at right angles to the previous one.

In between coats, it is imperative to clean the nozzles on your HVLP spray gun, as otherwise, small flakes of dried paint can be caught up in the spray and cause imperfections that will spoil the final effect.

Once you are satisfied that you have got a good covering and applied enough coats of auto body paint to create an excellent finish, apply one more coat for best effects, allow it to dry, and then sand back for a smooth finish. You should leave the paint to dry completely for 24 hours and then apply a wax polish to the whole body in order to protect your new paint job and give it a shine that will certainly catch the attention of anyone you pass on the road.

Rate this Article:

Current: 5 / 5 stars - 1 vote(s).

Article Tags: Auto Paint How To: A Basic Guide

Article Source: http://www.articlesbase.com/automotive-articles/auto-paint-how-to-a-basic-guide-286424.html

Print article

Send to friend

Publish this Article

Author feedback

About the Author:
Jason has been in the construction equipment and industrial sales business for over 10 years. He owns and operates Red Hill Supply to better serve the automotive and industrial industries. - Automotive Tools

Submitting articles has become one of the most popular means of generating quality backlinks and targeted traffic to your website. Join us today - It's Free!

Article Comments

Add new Comment

Got a Question? Ask.

Ask the community a question about this article:

Q&A Powered by:

Latest Automotive Articles

Best Review for the Undercover Tonneau Cover
By: Ken Bishop | 13/10/2008
If you are searching for a good truck bed cover for your truck then you need to read the best review for the Undercover Tonneau Cover. See if this truck bed cover if right for your truck. The main advantage of this tonneau is that it gives enough protection in all...

The Truxedo Deuce Tonneau Cover Review
By: Ken Bishop | 13/10/2008
The Truxedo Deuce Tonneau is made by one of the leading manufacturers of truck bed covers. Their truck bed covers are well known for their quality and durability. They are more durable as they use the strongest fabric available in the market. In the case of certain tonneau covers, they...

Reasons Why Tires Fail and What You Should Do
By: Thomas Winn | 12/10/2008
Tires could well be the most important component on your car or truck, given that they affect the performance aspects of the car, including handling and acceleration to ride comfort and braking. Therefore, it's absolutely necessary to maintain your tires and they probably deserve more attention than any other components...

Buying a Used Car Online
By: Jay Gaulard | 11/10/2008
Whether purchasing an auto from an auction or automotive classifieds, always be careful. Buying a used car online can be tricky if you don't follow a few simple tips.

Auto Insurance Considerations When Moving House
By: Kade Phillips | 11/10/2008
Few of us live in the same location through the course of our lives. Every so often, for one reason or another, most of us have to to re locate. Discover how a house move can affect your car insurance rates and what you may be able to do to lessen the chances of a rate increase.

US Top 10 Bike Models
By: David H. Urmann | 11/10/2008
Mountain bikes, BMXs, Tandem Bikes, and Children Bikes belong to the top ten bicycle types and models sold by leading bike sellers in America. The following is the list of bicycle types and models that are very popular among riders in United States. Road Bikes Road Bikes are built for...

Top Water For Fuel And HHO Kits - Water4gas Review
By: Al Draker | 10/10/2008
The internet is a powerful tool that can be used for a variety of research terms. Today it is more useful than ever when one is researching options to improve their gas mileage. There are a variety of videos and manuals that aim to help the non-mechanic to convert their...

Water For Gas Hydrogen Kit For Your Car
By: Hirtan Hirtani | 10/10/2008
The price of gas is astronomical these days. People are looking to buy gas saver cars and are all over the internet doing research on gas savers. There is a simple solution to this most perplexing problem and that is buying a hydrogen kit for your present automobile. What is a...

More from Cooper Miller

Air Flange Tool And Auto Body Repair
By: Cooper Miller | 06/02/2008 | Automotive
Completing any job in the workshop is always easier if you have the right tool available. One area in which this is particularly true is body work on autos. If you want to be able to provide the best possible finish for a customer when repairing their vehicle, then you...

An Air Shear Can Cut Through Almost Anything
By: Cooper Miller | 06/02/2008 | Automotive
When you have some heavy duty metal that needs cutting, and a regular power saw is not up to the job, then the first place to turn is an air shear. This powerful air tool is designed to be used when you need a precision cut through the thickest metal...

Needle Scaler And Debris Removal
By: Cooper Miller | 06/02/2008 | Automotive
One of the most important aspects of almost any job in a modern auto workshop is getting the area that you are working on as clean as possible. Removing dirt and debris from the area where you want to carry out a repair makes finding and isolating the problem much...

Nitrogen Tire Inflation System
By: Cooper Miller | 05/02/2008 | Automotive
Until very recently, advances in tire technology concentrated on the rubber, tread, and the radial metal used in the structure of the tire. Over the past twenty years, the humble tire has come a long way, but one thing remained constant. The means by which the tire was inflated. Now,...

A Wheel Balancer Can Help You Smooth Out Your Ride
By: Cooper Miller | 05/02/2008 | Automotive
Giving your vehicle workshop clients the best service possible means ensuring that when every car leaves the shop it is like new. When you do a good job, customers will return again and again, so the better each car drives, the more satisfied your customers will be. One area where...

Cordless Impact Wrench
By: Cooper Miller | 02/02/2008 | Automotive
An impact wrench is a tool designed to allow mechanics to apply high amounts of torque to a nut and bolt fastening in order to loosen or tighten the fastening with a minimum of effort. Impact wrenches have traditionally required a connection to an air supply in order to generate...

Plasma Cutters Can Cut Though Anything!
By: Cooper Miller | 02/02/2008 | Automotive
One of the best tools for cutting metal is a plasma cutter. It is effective and convenient to use, and thanks to the latest technology being applied in the area, it is now possible to cut metal with almost laser precision. A plasma cutter works differently than a conventional welding torch....

Oil Filter Crusher And Epa Compliance
By: Cooper Miller | 01/02/2008 | Automotive
If there is one item that can quickly build up in any auto shop storage area, it is used oil filters. At almost every service that you carry out on a vehicle, it is necessary to remove and replace the oil filter; meaning that your stock of used ones can...

Article Categories

Article Marketing

Article Notepad

Stop Duplicate Content

Term Papers

Need Help?

Sign up for our email newsletter

Receive updates, enter your email below

Use of this web site constitutes acceptance of the Terms Of Use and Privacy Policy | User published content is licensed under a Creative Commons License.
Copyright © 2005-2008 Free Articles by ArticlesBase.com, All rights reserved. (0.25, 8)