Learn to Restore Car Paint and Bodywork - Spray Painting Tips
If you are performing, auto body finishing your work area has to be almost sterile unless of course you enjoy having to strip, sand, repaint and buff repeatedly on the same car because something got into the paint or finish or you left some residue and went onto the next step. If there is anything present that could ruin your finishing work then it probably will.
One of the most valuable assets you can have is a quality wax and grease remover. Most often the to the job at home guy ends up with an inferior finish if all due to not removing the residue of anything from the car like old wax and dirt build up or airborne debris.
There are solvents that can be used but you are taking a chance when you use these. Many novice auto body finishers are devastated when the mistakes made before the primer application start to appear. The key to being successful is to know the right materials for the job. Then it's knowing how to use them. Finally when and where should they used.
What You will Need
- There are lots of products that will remove grease and wax but you need to remove silicone.
- You will need about 3 gallons
- Solvent and lint free rags actually cheesecloth or tough quality paper towels are the best
- detail scrubbing brush to get at hard to get spots where there may be silicone
Do Not Use
- regular lacquer thinner (can create havoc with paint systems)
- enamel reduced (same reason)
- cheap rags
(Note: if you really have to use lacquer thinner work quick and don't let it soak into the prime coat too much or too long)
Degreasing Times:
It certainly is not a one-time operation. At least not when you consider that if you were to even leave one print smudge on the car it will likely show up as discoloration in the finish. It is imperative that you remove any and all of grease, wax and silicone...
- prior to touchups
- prior to the bare metal conversion coating
- prior to filling and glazing
- prior to primers
- prior to basecoat
- prior to finishing coats
The Right Spots to Degrease:
The areas that you are going to be working on such as the body and panel.
Do not miss around all these areas...
Trim, weather stripping, cowel louver, panel joints and air intakes
Inside the head and taillight apertures, only necessary if you have removed the trim or bezels.
Also around the door areas, inside of hood and the lid of the trunk and the wheels
Be absolutely sure that you remove all the cleaner and then wipe with a clean rag. If in doubt do it again.
Reasons for Degreasing
- To know you are going to get the best results - its yours and the business reputation at stake
- the cost of the materials such as primer surfacer, primer, metallic, clear coats
- labor of yours and what you pay in wages
Questions and Answers
Article Tags:
spray paint
,auto bodywork
,car repair
,car painting
,cars
,automotive
,auto
,hobbies
,recreation
,self help
It gets pretty boring when you driving down the highway and you see all the same colors of vehicles. Sure they are different makes and styles, but color wise they are all the same and uninteresting. Then every once in a while something really dynamic pulls up beside you. Its...
If you have decided to do some repairs on your car perhaps in preparation for painting then you will need to know how to remove the old paint. To begin with, you will most likely want to use a paint stripper rather than hours of sanding. There are many commercial paint...
With money being tight nowadays, perhaps the solution to giving your car a new look would be to indulge in some car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it may be the ideal solution. It is a...
Car scratches eventually appear in a way of almost every car owner. There are many methods of dealing with them however painting it over with an auto spray gives the best result. If you have enough experience you will be able to paint over even a big scratch but a...
You will be surprised to see just how to spray car paint really can be easy. That doesn't mean that you can just grab a tin of paint and go at it. There are some basics you need to know. Both in the preparation and application. Step A: Prepare by gathering all...
Respraying your car means you are prepared to devote some time and money to complete this project. There is no reason why you can't do this yourself, but you are going to need some guidelines. Unless of course you are already a professional car painter. First of all make up your...
International vehicle transports service providers offer facilities for shipping you vehicle across to the new country. These vehicle transport companies have the legal authority, the right infrastructure and a wide network to carry out their operations.
Shopping for a used car can be like walking on a minefield. Everything looks harmless at first glance, but take one sloppy step and it's the end of the days for both you and what your money's worth.
Looking for a reliable family car can be a very challenging process. You would have to take the car's reliability and features into account while staying within the budget that you have.
If the budget that you've prepared for your car purchase isn't that big, this doesn't mean that you should purchase a brand-new car with undesirable features and performance ratings.
Buy here pay here's preferred by people round the world. It is specially meant for folks belonging towards lower strata of society and so their dream of owning an auto should be fulfilled with the buy here pay here Indianapolis.
When buying a car one of the biggest choices you have is the color! Though there are many choices to make it's the main factor that you can decide on which suits you best and appeals to your sense of style. Black is a big seller yet silver can sometimes...
One thing is for sure if you are going to be a paint technician then how good you are at it will all depend on how well you learn to operate your spray guns. They are the tools of the trade and can mean the difference in your being an...
There are two passageways or channels within the gun. One is for airflow the other for material flow. The fluid needle takes the required paint from the reservoir. As you use the trigger to control the tapered needle, it will pull it from the tip allowing more material through. Simultaneously...
Auto body Repairs Using Sand Blasting Equipment A restoration requires you to make a choice as to which method you are going to use. In order to do this you really need to categorize the levels of restoration. Category One - Light to Medium fix ups Mechanical repairs and repainting The basic mechanical work...
There are terms like convex, concave and waffle. These are terms used in the business of polishing and buffing in the auto repair shop. To most people, polishing and buffing the car is something that they do on the weekend, but in the professional world, this function takes on a...
Discuss this Article
