Remember Me
forgot your password?

Nitrogen Tire Inflation System

Until very recently, advances in tire technology concentrated on the rubber, tread, and the radial metal used in the structure of the tire. Over the past twenty years, the humble tire has come a long way, but one thing remained constant. The means by which the tire was inflated. Now, thanks to huge research into what could improve tire performance for all drivers, nitrogen tire inflation systems are available that are set to revolutionize the whole industry.

Using regular compressed air to fill tires has been the standard practice for more than a century, but the fact is, the air inside the tire is one of the main contributing factors in tire degradation, which can lead to a catastrophic failure in the tire. Using a nitrogen tire inflation system allows you to replace the regular air in the tire with pure inert nitrogen gas, which in turn protects the rubber, and has a number of other important benefits for drivers.

Using a nitrogen tire inflation system allows you to give drivers a more efficient, safer, and more comfortable drive. There are many reasons for this, but they are all related to the fact that when you use nitrogen to fill the tire rather than regular air, less of it escapes, meaning that the pressure is more reliable, so the tire stays at its optimum level.

Normal ambient air contains around 78% nitrogen; however, the remaining 22% is made up of other gases, including around 21% oxygen. Oxygen is one of the most reactive gases in the world, and it can cause a great deal of damage to both the rubber of the tire, and the metal of the rim. Over time, the oxygen degrades the rubber and the metal making the valves less effective, and the rubber more porous. A tire filled with regular air starts to deflate gradually.

Low pressure in a tire means that it has a higher rolling resistance. In turn this means that the engine has to work harder to push the car along, meaning a higher fuel bill. By using a chemically inert gas with a nitrogen tire inflation system, you are able to guarantee a higher internal pressure in the tires. This provides a better ride, better fuel economy, and of course better safety, as a tire that is properly inflated is less likely to fail in use due to proper distribution of weight, and even wear.

Over the next couple of years, as concern about man made climate change grows, and with the ever increasing cost of fuel, many drivers are going to be looking for an edge from their workshop. Nitrogen tire inflation systems are set to be that edge. Imagine being able to offer a single service that can improve fuel efficiency by an average of 8%, extend the lifetime of an expensive part of a car, and provide your customers with a better ride. You can with a Nitrogen tire.

Nitrogen tire inflation systems have been extensively tested by manufacturers such as RTI, and are demonstrating some excellent results. For example, the RTI RTINTF-15 Plus is an excellent piece of equipment for inflating nitrogen tires. The headline of these results is the 8% improvement in fuel economy. To put that amount into perspective, over 12 months, a person who spends $50 per week on fuel would potentially save up to $200 thanks to just replacing the air in their tires with pure nitrogen.

Offering the best possible service to the people who use your workshop or auto repair center means bringing them the latest advances first. Nitrogen tire inflation systems can give your business an edge over the competition, providing you with the means to provide a service that other people cannot, and that can only be a good thing for you and your bank balance.

Cooper Miller
Jason has been in the construction equipment and industrial sales business for over 10 years. He owns and operates Red Hill Supply to better serve the automotive and industrial industries. - Air Compressors
Rate this Article: 5 / 5 stars - 1 vote(s)
Print Email Re-Publish

Add new Comment



Captcha
0
1. sujith nair (09:30, 02.08.2009)
good article...can add few more technical details to make it perfect..i give 7/10 !!

  • Latest Automotive Articles
  • More from Cooper Miller

Nissan Auto Dealers

By: Smithanderson | 26/11/2009
Find comprehensive information on Nissan Auto Dealers

Car Air-conditioning Repair Practical Tips

By: Steven Magill | 26/11/2009
A vehicle's air conditioning is very important so if ever it gets busted, it should be fixed immediately. As others would say, a car air conditioning repair would be quite difficult to deal with; you need to call for help from a professional mechanic who has the knowledge and the experience in terms of fixing vehicle AC systems.

How to Do Your Own Auto Glass Chip Repair

By: Yvonne Corilla | 26/11/2009
A repair that is often overlooked until too late is auto glass chip repair. While a chip in the windshield may not seem like much environmental waste pollution and the stress of temperature changes can cause it to grow over time, resulting in cracks and repairs more expensive. However, it has to come to this. With this article, and a do-it-yourself glass repair kit cars, you can fix a chip in the windshield before it gets worse.

How to find a government car auction

By: Rinah Olson | 26/11/2009
Government-seized cars or decommissioned cars that the agency no longer uses is usually auctioning off by a government car auction.

Seized And Repossessed Cars: What is it?

By: Rinah Olson | 26/11/2009
No longer a secret of the well informed few, repossessed cars are becoming better known thanks to media coverage of the financial woes of unfortunate individuals forced to lose their cars, among other things, due to the recession.

Repossessed Cars Are Rapidly Taking Over

By: Rinah Olson | 26/11/2009
Second hand cars and especially repossessed cars are rapidly taking over the car websites , a trend which is showing that it will continue in the future to come. At any car dealers, it has been observed that used cars and especially repossessed cars are rapidly taking over the car industry, a trend which is showing that it will continue in the future to come.

Beginners Guide For Remote Control Trucks

By: Chris Azzari | 26/11/2009
You've been giving some serious thought about dabbling with remote control vehicles as a hobby and your attention is pretty much focused on getting a beginner remote control truck. The only problem is this is your first time and you don't have a clue what to look for. Granted, the...

The Dreaded Traffic Jams

By: Brenda Williams | 26/11/2009
No one likes to sit in traffic jams. However, if you live anywhere near a metropolitan or city-type area, traffic jams aren't just inevitable; they seem to be part of your daily routine. Recently, I moved into a new apartment in a different town. Since moving, I...

Air Flange Tool And Auto Body Repair

By: Cooper Miller | 06/02/2008 | Automotive
Completing any job in the workshop is always easier if you have the right tool available. One area in which this is particularly true is body work on autos. If you want to be able to provide the best possible finish for a customer when repairing their vehicle, then you...

An Air Shear Can Cut Through Almost Anything

By: Cooper Miller | 06/02/2008 | Automotive
When you have some heavy duty metal that needs cutting, and a regular power saw is not up to the job, then the first place to turn is an air shear. This powerful air tool is designed to be used when you need a precision cut through the thickest metal...

Needle Scaler And Debris Removal

By: Cooper Miller | 06/02/2008 | Automotive
One of the most important aspects of almost any job in a modern auto workshop is getting the area that you are working on as clean as possible. Removing dirt and debris from the area where you want to carry out a repair makes finding and isolating the problem much...

Nitrogen Tire Inflation System

By: Cooper Miller | 05/02/2008 | Automotive
Until very recently, advances in tire technology concentrated on the rubber, tread, and the radial metal used in the structure of the tire. Over the past twenty years, the humble tire has come a long way, but one thing remained constant. The means by which the tire was inflated. Now,...

A Wheel Balancer Can Help You Smooth Out Your Ride

By: Cooper Miller | 05/02/2008 | Automotive
Giving your vehicle workshop clients the best service possible means ensuring that when every car leaves the shop it is like new. When you do a good job, customers will return again and again, so the better each car drives, the more satisfied your customers will be. One area where...

Cordless Impact Wrench

By: Cooper Miller | 02/02/2008 | Automotive
An impact wrench is a tool designed to allow mechanics to apply high amounts of torque to a nut and bolt fastening in order to loosen or tighten the fastening with a minimum of effort. Impact wrenches have traditionally required a connection to an air supply in order to generate...

Oil Filter Crusher And Epa Compliance

By: Cooper Miller | 01/02/2008 | Automotive
If there is one item that can quickly build up in any auto shop storage area, it is used oil filters. At almost every service that you carry out on a vehicle, it is necessary to remove and replace the oil filter; meaning that your stock of used ones can...

Submit Your Articles Free: Signup
Article Categories




Use of this web site constitutes acceptance of the Terms Of Use and Privacy Policy | User published content is licensed under a Creative Commons License.
Copyright © 2005-2008 Free Articles by ArticlesBase.com, All rights reserved. (0.16, 6, w1)