Simple Simon manual label dispenser

A label dispenser is a machine made to make simpler the course of eliminating a label from its liner or backing tape. Label dispensers are intended with changeable sizes and features which are frequently specific to the type of label they can dispense. Label dispensers amplify efficiency, eradicate waste, and raise operator productivity. Labels are carried out in a quickly, fast and clean method.

A manual label dispenser contains a housing including a first sidewall and a second sidewall. The first sidewall has a breach. The second sidewall has a rear neck portion connected with the opening of the first sidewall and an opening beside the rear neck portion. A label peering device is mounted on the housing involving the first sidewall and the second sidewall. A roll has an end mount attached to the rear neck portion of the second sidewall and a reverse end suspended, whereby a label roll is mounted on the roll via the opening of the first sidewall.

Simple Simon manual label dispensers are heavy-duty manual label dispenser. They are compact, sturdy, high quality, metal, precision made metal dispenser which is quite useful for dispensing labels when a limited amount of labels are involved. They are manually functioned for every kind of roll labels, even thin ones like Mylar, Foil, Holographic, and Clear Plastic. They are manual operated dispenser for so modest cost. They have up to 6-3/4" capacity units which hold 1 to 5 rolls of pressure sensitive labels which pull down on the liner to advance each label that will take up to 6" diameter rolls. Its availability usually ships the next business day.

Simple Simon manual label dispensers’ quantity per package is 1 and weight per unit is 4. There are two kinds of Simple Simon Manual Label Dispensers, first is 4" label width whose height is 133mm, length is 241mm and 108mm wide and another one is 6.75" label width whose height and length is similar to the first one and it is 178mm wide. All the metal designs are durable. It is manually multi roll label dispenser and it can dispense much number of different rolls of labels separately up to the highest width of the machine. Its compatibility suits butt cut, or die cut with Mylar, foil, holographic, transparent, or any other thin label stock.

Simple Simon manual label dispensers label boxes, envelopes, brochures, bottles, bags, cans, or anything that needs a label. You know you will get support when you buy this in house manufacturing. The manufactures use very few outside sources for the machine components. Its side frames are manufactured with the highest quality metals then formed, countersunk, de burred, and examined one at a time at our facility. Its dispensing tables are shaped out of drawing quality Steel. The peel rim is hand milled to spec within .001" by a particular hand-made cutting tool to obtain that wonderful peeling edge needed to dispense labels without tearing the backing paper. Dispensing tables are polished with ultra-fine polishing compound so paper flows generously about the plate.