How to Static Set Ihub for Use With Router
For this, the thing that you need to know first is the addresses your router is using, something that is generally available in your router manual. In some cases, it allows the user to enter the address and access the router through Internet browser, revealing all the required data.
Or if you are using XP, you can do the following: go to Start - My Network Places - right click My Network Places - left click properties - left click Local Area Connection - left click Support. This will reveal your local ip address and your local ip gateway, the things that you will need.
So, follow the given steps to static set Ihub for use with router,
Step 1 - Setting type-set to static
Step 2 - Local ip: this has to be set to a value higher than any number of devises connected through router and hubs. For instance, if there are five devises connected through the router or hub and they are set to DHCP, the first devise should be assigned 192.XXX.1.1, and all subsequent devices should be assigned 192.xxx.1.101, 192.xxx.1.102 and so on. To set your address higher than any number of devises connected, you can set it to 192.xxx.1.106 but experts at FTA FILES would suggest going still higher and set it 192.xxx.1.120. In this respect, what has to be kept in mind is that anything from 106 through 199 can be valid address.
Step 3 - Set port to 1920
Step 4 - Subnet mask should be set to 255.255.255.0 or the address that your Internet provider is using for the Internet wan.
Step 5 – Gateway should be 192.xxx.1.1, which is the same number used by your router for the local lan ip gateway and seems to match the first ip address supplied to the first devise.
Step 6 - Set DNS to yes.
Step 7 – Set domain name to www.svftaiks.com.
Step 8 – Set dns ip to 68.87.xxx.130. This is one of the two numbers that your Internet provider supplies.
Step 9 – Set server port to 1920
Step 10 – Look out for the serial number located on Ihub. The letters are entered via dvr controls as indicated at the bottom of the screen.
Step 11 – Press ‘ok’ on remote.
This should make both the green and amber lights to turn on if adapter is connected correctly. The amber light will blink when transmitting or receiving data while the light on your modem will acknowledge the Ihub. This should be followed by blinking of the send/receive lights on modem about every 20 seconds.
If all of these have occurred as has been mentioned then you are most likely connecting to the server. However, keep a tab on the send/receive lights on the modem since if they are not working, it is an indication of something gone wrong. Next, try out channel 342 or 302.
So, these are the steps that should let you static set Ihub for use with router. And if things do not work out the way as mentioned above, feel free to get in touch with experts at FTA KEYS who are more than eager to help you out on this.
Questions and Answers
With the plethora of desktop and mobile devices in your home or office connectivity between everything and to the Internet is vital for maximum productivity and entertainment. Making the connection between devices in a simple and effective way can be very confusing with the broad range of networking devices and standards available to use. This guide walks through the various standards, the devices that support flexible connectivity options and how you can use them for maximum benefit.
Cisco CCNA Discovery 4.0 CCNA 1 Exploration – Network Fundamentals (V4.0) CCNA 2 Exploration – Routing Protocols and Concepts (V4.0) CCNA 3 Exploration – LAN Switching and Wireless (V4.0) CCNA 4 Exploration – Accessing the WAN (V4.0) CCNA 1 Discovery – Networking for Home and Small Businesses (V4.0) CCNA 2 Discovery – Working at a Small-to-Medium Business or ISP (V4.0)
ADSL Is today a more affordable broadband access solutions, the charging current general use of monthly means. If a user uses an account online, it will certainly not worth a little bit
If you are a handy man and want to do some stuff on your own, then definitely aerial installations should not be on your list.
You can enhance the signals received by your television set by getting a proper and good TV television antennas installed with the help of a professional TV antenna installer in Melbourne and around. So, perk up your television viewing experience by getting HD television antennas with the assistance of a proficient and certified antenna installation company.
You can improvise the signals received from your television antennas either through the attachment of a signal booster or a digital convertor box along with it. So, enliven your television viewing experience by adding a signal amplifier along with your television antennas with the assistance of a talented and specialized antenna installation company.
So is your favorite little ‘idiot box' being a little cranky and stupid lately? Maybe you need to fix the antenna or install a new one in order to bring your little monster back to life. You can call for prompt services for antenna installation in Melton.
Are you still facing the poor television reception problem? We want to tell you that it's not something that should be suffering from or compromise with. If you are not able to see quality picture on your television sets, then it will be sensible on your part to call up the experts to make sure this issue can be quickly rectified. Professional and expert local technicians working in any of the antenna Installation companies will surely come to your place to resolve the problem.
There is no stopping Viewsat. It just got better with V-Link. V-Link is slowly but surely making its way to your local FTA dealer, eBay or what have you. Priced reasonably at $59.99, it works with all versions of Viewsat like Platinum Extreme, PRO, 7000 PVR, Ultra, Ultra-lite, 9000 HD and Viewsat MAX.
Viewsat is here and you are getting to hear the buzz about it, yet you don't quite know the terminology involved. Just read on and you would have updated yourself with this new phenomenon.
For the last few years or so, Free to Air Receivers or FTA have become very popular. This is because the dish of the standard size, which is used in Direct TV and Dishnet can also be used in these boxes to view a number of free to air channels beamed by different TV channels of the country as well foreign nations without having to pay any monthly subscription.
This article will change your mind set if you believe there isn't anything called free channels for TV. So, read on.
From the days when we had to rely on cable connections so as to be able to view our favorite channels, television viewing has undergone a sea change with the advent of FTA. There has been some significant savings too. Just how much? Lets find out.....
Discuss this Article
