Car Needs Brown's Gas

Normal 0

Brown's Gas has now become the most sought after discovery as many researchers are seeing it as a potent source to materialize the legendary "Water Car" owing to its unique properties. This gas has been named as Brown's Gas after the name of its discoverer-Yull Brown of Australia (originally of Hungary).

Brown's Gas is developed from water. Water is converted into a safe stoichiometric mixture of Hydrogen and Oxygen. The flame of Brown's gas under naked eyes is almost colorless but if proper lighting conditions are applied then it would be seen to possess a small blue cone with a longer pale red-blue extension. The overall "body" of the flame has different layers called "mantles". Ordinary flames like our very common Bunsen Burner Flame are formed by a set of explosions which means that each component of the flame is a result of small "explosion". On the contrary flame of Brown's Gas is formed as a result of "implosions". The combustion of the gas takes place in the "blue cone" region .The flame of Brown's Gas on application to an element or substance increases its temperature due to a unique property of Brown's Gas absent in other gas flames which is called as "interactive combustion property". The flame of this gas has a peculiar property of changing its temperature on application to different substances. When normally burnt in air the temperature was measured in the range of 264-269F;when applied to a brick recorded a temperature of 3100F (which means that it should be handled with care in laboratories or else one mistake and the entire Lab is gone); and when applied to a tungsten wire recorded 6000°C.

Brown's gas has many characteristic properties, some of which are:

1. Used in a car where the gas combusts and emits water vapor as the only effluent in its exhaust.

2. A solid-state refrigeration unit in which temperature could instantly be changed

3. A room heater fueled with the gas will carbonize a strip of paper held near it but not create flames or smoke.

4. Used in an acetylene torch it singed hairs from a welder's forearm but didn't burn the skin.

5. Flame from this gas can glaze concrete thereby making it impervious to acids and other corrosives and greatly extending the concrete's useful lifespan.

6. Steel, after treatment with the flame, is much more impervious to rust and before treatment.

With the help of Brown's Gas we can convert water to an energy source and use water as fuel in cars. As already told when Brown's Gas is sparked it forms water by implosion. This property can thus be exploited in replacing the existing fuel run cars with "Water Cars" or water powered cars and make the world free from pollution.