How To Change Transmission Fluid
(1) Before attempting to change your fluid, you should check and make sure that you have choked the wheels of your vehicle, so as to prevent your vehicle from rolling.
(2) Raise up the front of your vehicle with a jack, high enough that you can get underneath and work comfortably. (Transmission fluid is located within the transmission fluid pan, underneath the vehicle, directly behind the engine.)
(3) Find the bolts that are holding up your transmission pan. You will have to find the proper size of Socket to remove the bolts and drop the transmission pan.
(4) Then start by removing all of the bolts except the corner bolts.
(5) The transmission pan will be completely full of fluid, so you will have to use a 6-10 quart drain pan. This is to prevent the fluid from spilling on the ground.
(6) Loosen the remaining corner bolts and place the drain pan under the end of the pan that will remove first.
(7) Remove either the front corner bolts or the back bolts and catch the fluid and drain as much as you can before completely removing the transmission pan.
(8) Place one hand underneath the transmission pan while removing the remaining bolts.
(10) Slowly lower the pan to the ground and place the pan out of the way, so as not to spill the remaining fluid. (Look up at the bottom of the transmission, you will see a filter hanging in place, it's just held on loosely by a rubber grommet.)
(11) Gently pull down on the filter, and remove it. (When buying a new filter, it is a good idea to take the old one with you so as to buy the proper filter for your car)
(12) Take the new filter out of the package and place it in the same location where you took off the old one. (Be sure that the rubber grommet is in place on the new filter) Place the filter in the proper location on the transmission and push up firmly so as to get it in place.
(13) Drain old fluid out of transmission pan, completely.
(14) Replace the pan bolts, corners first.
(15) Then put in the remaining bolts all the way around the pan.
(16) Use your socket and ratchet and tighten the bolts one across the pan from the other until all the bolts are snug.
(17) Replace transmission fluid as recommended in your owners' manual.
Remember safety first and make sure that you have choked the wheels of the vehicle to keep it stabilized during fluid change.
Questions and Answers
Transmission Repair Billings MT: Why Transmission Fluids Change? Find Details at Precision Automotive, Inc. a Transmission Service Shop Billings MT.
The biggest asset besides our home is our vehicle. To keep it on the road and operating at top performance it is our responsibility to make sure it is properly maintained. Occasionally routine upkeep is all we need, at other times it could be a safety issue we must address, or we may need an engineer who has the capacity to troubleshoot when signs point to mechanical issues. Being pro-active when it comes to maintaining our vehicles can keep us behind the same wheel longer and keep ...
Maintaining your car's air conditioning unit is an important and needed part of living in Arizona. The summers are excessively hot, and the cost and discomfort brought on by a broken air conditioner can be astronomical. In addition to lost funds and general unpleasantness, a broken air conditioner can result in health hazards. In very hot, dry regions like Arizona your vehicle's air conditioning unit is much more than a luxury. There are actually numerous health hazards associated wit...
Everyone who loves their vehicle would make all possible moves to take care of its parts. Bothe internal as well as external part and its proper function is equally important to make sure that its performance is good.
Vehicles today are capable of driving 200,000 – 500,000 miles on the original drive train parts. Most fluid changes cost between $19 – 100. The part the fluid protects costs between $1,500 – 10,000 and more!
The soaring petrol prices and technological advancements in the diesel power trains of today have showed the way to the consumers to opt for diesel-run cars.
In 1935, the Toyota motor corporation had launched its first model in the markets of US. The founder of this manufacturing company is Kiichiro Toyoda.Nowadays, it is considered as number one Japanese automobile company in all over the world. It is well known for its refined and well designed vehicles and gained popularity in very short duration of time.
Bentley has proven to be the extravagant vehicle for giving the classy touch. And these cars are used for family day out or for business purpose also, means multipurpose.
Many people in San Diego, California are very particular when it comes to their vehicles. They fuss about the way these look, what kind of model and type, or how fast these are.
Windshield wiper blades are essential parts of safety. They give the driver a clear and unobstructed view of the street especially during winter and rainy season. Whenever small droplets of water or snow get on accumulated on the windshield, the wiper blades wipe the windshield and keep it clean. Different kinds of windshield wipers are available in places like Riverside windshield replacement.
A boil is patch of skin that has become infected and filled with pus. It is also referred to as a lesion. Boils are generally firm to the touch and quite painful.
Skin boil formation fall in to a few different categories though they all have essentially the same makeup. All boils begin as a red patch eventually growing in size.
Though it is possible for anyone to develop a boil, persons with pre-existing medical conditions that affect the immune system are more at risk. The following could increase your risks.
Staphylococcus bacteria or “staph” for short creates an infection that can be carried in the nose and mouth as well as genital and anal areas.
Boils are generally found on the inner thighs, buttocks, back, shoulders, face and underarms. It’s not so uncommon to develop boils on genital areas as well.
Discuss this Article
