Looking Closely at Disc Brakes

<h1>Looking Closely at Disc Brakes</h1>Author: <a title="Jedd Sullivan" href="http://www.articlesbase.com/authors/jedd-sullivan/115876.htm">Jedd Sullivan</a> Losing ones brakes is one thing that every motorist is worried about. To actually stop a car that is running, a car's Brake System depends on the brake disc. Usually the single- piston floating caliper, a brake disc has the following key components: Elements of a disc brake * The brake pads * The caliper, which contains a piston * The rotor, which is mounted to the hub It would be important for one who is interested to learn, to keep these key <a href="http://www.autopartsplace.com">auto parts</a> in mind. Not like in our ordinary bicycle where a caliper clutches the brake pads directly to the wheel, in a disc brake, the brake pads squeeze the rotor instead of the wheel, transmitting the force using hydraulics instead of through a cable. The resulting friction between the pads and the disc then decelerates the disc. Looking at it in a dork's viewpoint, when a car moves, it gives off a form of energy called kinetic energy.  The brake system of a car transforms this energy to heat by utilizing friction.  It is because of this friction that generally, car disc brakes are vented. Disc brake vents A vented disc brake has a series of vanes that pumps air through the disc to supply cooling. Located between the two sides of the disc, this disperses the heat generated by the friction between the pads and the rotors. A unique feature of the single-piston floating-caliper disc brake is that it is self-centering and self-adjusting. The caliper glides from side to side but each time the brakes are used it has the ability to go to the center. One must be aware that there are also no springs that pull the pads away from the disc making them always stay in light contact with the rotor. This makes sure that much application of pressure in the brake pedals are not needed to engage the brake pads.  Because the pistons in the brakes are much bigger in diameter as compared with the ones in the master cylinder, this is a very important aspect to consider. In case of rotor wobble where there is more space between the rotors and the pads, it will take more than a few applications of the brake pedals before the right amount of fluid is pumped into the brake cylinders to engage the retracted pads. Self-adjusting disc brake For disc brakes, it does not follow that added pistons are actually better.  The four-piston fixed- caliper design or the dual piston fixed brake designs used by older car models have been nigh on being phased out because of a single-piston's dependability and affordability. Emergency Brakes In terms of emergency brakes, they are differentiated from the normal disc brakes on all four wheels by the mechanism by which it is set in motion in case of total primary brake failure.  For this purpose, the use of cable remains one of the general choices.  This type of brakes can usually be seen as a separate drum brake integrated into the hub of the rear wheels. Other prevalent options include cars which have a lever that turns a screw, or actuates a cam.  This then presses the piston of the disc brake. Servicing Your Brakes Brake pads should be examined every now and then to see if they need replacement.  Usually, a piece of metal, named wear indicator assists the motorist to know when it is time for him to change pads.  When there is already adequate wear on the pads, the small metal comes in contact with the discs, resulting in a squealing sound. The inspection opening on the caliper also lets one to see just how much friction material still is left on the pads. What to look for during inspection: Deep scores worn into the brake rotors.  This is especially a result of a damaged brake pad left for an extended length of time on a car. Warping.  The brake rotors may also lose their flatness causing it to shudder or vibrate during stopping. Both of these problems may be solved by a simple refinishing wherein some material is removed from the motor to even its surface out.  Though this is an effortless option to take, this should be done only when the rotors are really badly deformed or scored.  Doing so more often might decrease the life of your brake rotors, thinning them every time a material is removed. One should know the tolerable thickness for every rotor as found in its shop manual to know when a replacement is needed. It is every car owner’s responsibility to know how these auto parts work to make his car a safe machine for him to trust his life with everyday.About the Author: For more info, visit <a href="http://www.autopartsplace.com/bg">Auto Parts Place</a>Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/cars-articles/looking-closely-at-disc-brakes-1364612.html" title="Looking Closely at Disc Brakes">Looking Closely at Disc Brakes</a>

Losing ones brakes is one thing that every motorist is worried about. To actually stop a car that is running, a car's Brake System depends on the brake disc. Usually the single- piston floating caliper, a brake disc has the following key components:

Elements of a disc brake

* The brake pads

* The caliper, which contains a piston

* The rotor, which is mounted to the hub

It would be important for one who is interested to learn, to keep these key auto parts in mind. Not like in our ordinary bicycle where a caliper clutches the brake pads directly to the wheel, in a disc brake, the brake pads squeeze the rotor instead of the wheel, transmitting the force using hydraulics instead of through a cable. The resulting friction between the pads and the disc then decelerates the disc.

Looking at it in a dork's viewpoint, when a car moves, it gives off a form of energy called kinetic energy. The brake system of a car transforms this energy to heat by utilizing friction. It is because of this friction that generally, car disc brakes are vented.

Disc brake vents

A vented disc brake has a series of vanes that pumps air through the disc to supply cooling. Located between the two sides of the disc, this disperses the heat generated by the friction between the pads and the rotors.

A unique feature of the single-piston floating-caliper disc brake is that it is self-centering and self-adjusting. The caliper glides from side to side but each time the brakes are used it has the ability to go to the center. One must be aware that there are also no springs that pull the pads away from the disc making them always stay in light contact with the rotor. This makes sure that much application of pressure in the brake pedals are not needed to engage the brake pads. Because the pistons in the brakes are much bigger in diameter as compared with the ones in the master cylinder, this is a very important aspect to consider. In case of rotor wobble where there is more space between the rotors and the pads, it will take more than a few applications of the brake pedals before the right amount of fluid is pumped into the brake cylinders to engage the retracted pads.

Self-adjusting disc brake

For disc brakes, it does not follow that added pistons are actually better. The four-piston fixed- caliper design or the dual piston fixed brake designs used by older car models have been nigh on being phased out because of a single-piston's dependability and affordability.

Emergency Brakes

In terms of emergency brakes, they are differentiated from the normal disc brakes on all four wheels by the mechanism by which it is set in motion in case of total primary brake failure. For this purpose, the use of cable remains one of the general choices. This type of brakes can usually be seen as a separate drum brake integrated into the hub of the rear wheels.

Other prevalent options include cars which have a lever that turns a screw, or actuates a cam. This then presses the piston of the disc brake.

Servicing Your Brakes

Brake pads should be examined every now and then to see if they need replacement. Usually, a piece of metal, named wear indicator assists the motorist to know when it is time for him to change pads. When there is already adequate wear on the pads, the small metal comes in contact with the discs, resulting in a squealing sound.

The inspection opening on the caliper also lets one to see just how much friction material still is left on the pads.

What to look for during inspection:

Deep scores worn into the brake rotors. This is especially a result of a damaged brake pad left for an extended length of time on a car.

Warping. The brake rotors may also lose their flatness causing it to shudder or vibrate during stopping.

Both of these problems may be solved by a simple refinishing wherein some material is removed from the motor to even its surface out. Though this is an effortless option to take, this should be done only when the rotors are really badly deformed or scored. Doing so more often might decrease the life of your brake rotors, thinning them every time a material is removed. One should know the tolerable thickness for every rotor as found in its shop manual to know when a replacement is needed.

It is every car owner’s responsibility to know how these auto parts work to make his car a safe machine for him to trust his life with everyday.

For more info, visit Auto Parts Place

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/cars-articles/looking-closely-at-disc-brakes-1364612.html

Related Videos
Related Articles
Ask / Related Q&A

Play

Learn how Disc Brakes Work

Play

How to Set Up Hayes Mag on Post Mounts

Play

How to bleed Hayes-Disc Hydraulic Brake system

Play

How to Bleed a Hayes Nine/Sole Disc Brake

Play

How to Replace Your Disc Brakes

Latest Cars Articles
More from Jedd Sullivan

Cleaning Your BMW Rims

By: Kasan Groupe | 21/12/2009
If you love your BMW as much as I hope you do, you must make an effort keep it looking impeccable at all times. Everything down to your chrome rims should be shiny and beautiful. Unfortunately, many people neglect the rims of their BMW, which are easily damaged. If you want you rims looking great at all times there are few steps that you will need to take for maintenance and cleaning purposes. Follow my tips below and your rims will be looking great for years to come.

Some myth and facts on negotiate a “good deal” on a brand new Honda?

By: Rick Li | 21/12/2009
This article is designed to aid you in your search for a new Honda in Toronto. There are some myth and facts on how to get a “good deal” when it comes to dealing with a car dealership. Having worked in the industry for over 10 years, here are some tips on how to save you money and time when it comes to negotiating.

DIY Auto Repair: Replacing Your Brake Pads

By: Ryan Frank | 21/12/2009
Car repairs can cost you a lot of time and money. You can save yourself some of both by learning how to do some of the more basic auto maintenance procedures. With that in mind, here’s a brief DIY guide to one of them: replacing your brake pads. You’ll need: an open end or adjustable wrench, a c-clamp, a hammer, a small bungee cord and Allen wrenches.

Five key tips for inner city driving

By: Phil Adams-Wright | 21/12/2009
If you work in or have taken a shopping trip into one of our countries major cities like London, Manchester or Liverpool, chances are you’ll have seen streets jam packed with cars, buses and lorries. You may be glad that you haven’t had to drive that day, but for many people driving in the city is a regular way of life. There are a lot of city drivers who may get stressed which can lead to lapses of concentration and accidents.

Velour Car Seat Covers for Elegant yet Personalized Interiors

By: Smith Swan | 21/12/2009
Having the pleasing look and feel inside your car is necessary when it comes to enjoy riding your car. If the seats are comfortable and appealing, you will love to spend moments inside the car.

Great Gifts for the Golfer In Your Life

By: Dan Bodrero | 21/12/2009
What do you get for the avid golfer who has it all? At times, it can be difficult to come up with a gift idea for someone who loves golf so much, since they probably already have everything they want or need.

One Way Rental Cars – Why Is One Way Car Hire a Practical Choice?

By: David Patullo | 21/12/2009
If you are planning to move to another location, or if you simply need a one-way transport, then it would be practical to consider one way rental cars. The renting of vehicles for one way destinations are now common as it offers a solution to many people who simply need to go from one place to another without the need to go back to their original location.

National Rental Cars – Why People Like National Rental Cars

By: David Patullo | 21/12/2009
Have you ever thought about how quickly our lives can be fast forwarded and before we know it we are in the next year and time that we thought we had just slips us by. Because of this it becomes more and more important that there is a company that is able to provide people with what we need. National Rental Cars is a company that has always been there to support the average working person with their rental car needs.

Earth Friendly Engines

By: Jedd Sullivan | 28/09/2009 | Cars
The eighties have not only been known as the era of the dreaded dance moves and funny hairstyles. This has also been the time when the prodigal player of the automotive industry came with a vengeance, introducing more Carbon Monoxide producing vehicles to our streets. Long gone were the days when everybody was busy dispensing chlorofluorocarbons (CFC’s) into our atmosphere. Recently, however, it is totally different scene as tech producers and consumers exhibit a more heightened consciousness

Making Our Cars Hurt Our Environment Less

By: Jedd Sullivan | 18/09/2009 | Cars
Though, car companies have been working for ages in coming up with earth-friendly vehicles, we ought to accede our part in this matter. Truly, when one thinks about it, there is so much that a person can do. Mentioned below are groovy substitutes the we as consumers have in whipping out our cars more nature-friendly. Options range from those that will only need some purchase to those that will necessitate tinkering with your car's auto parts.

The Road Ruler

By: Jedd Sullivan | 28/08/2009 | Cars
It was the vehicle that got everyone noticing when I brought this in the reunion of my class ‘96, inspiring double head turns and glances. That was the road ruler, the real life 2003 Dodge Durango 4×2 in black, the head runner of the heat and sweat morning from the group whose noisy hilarity could be heard.

The Road Ruler

By: Jedd Sullivan | 29/07/2009 | SUVs
Truthfully, the 2003 Dodge Durango is the only sport utility vehicle that carries an open letter to the motorists when it traverses the metropolis. It has the agility that nobody in its class surpasses simply because of its perfected midsize aerodynamic body activated by its powerful 4.7 liter V8 magnum engine - the real power.

Asia's Worst Drivers

By: Jedd Sullivan | 21/07/2009 | Culture
Drivers are doing crazy things all across Asia. They back into oncoming traffic and stop on busy roads to chat with friends on the sidewalk. They eat pork buns and fill in business reports behind the wheel. They speed. They drive drunk, and they fall asleep at the wheel.

The Search for a Fuel-Cell Car

By: Jedd Sullivan | 15/07/2009 | Classics
There has to be an alternative to petrol-driven cars, the young scientist thought before setting out to pursue his dream.

Electric Cars? Forget About It!

By: Jedd Sullivan | 01/07/2009 | Cars
The electric car may be an expensive way for those who can afford it to make a statement. But where a car is an integral part of life - from hauling the family on vacation to taking an emergency trip to the hospital on a cold night - the vast majority of people will find that an electro-buggy is just not good enough.