Installing a Radio Referenced Ntp Server

| Posted: 03-04-2008 | Comments: 0 | Views: 35 | Rating: (90)

(?)

Many networks in organisations suffer from a lack of time synchronisation between servers, workstations and other network components. This can lead to problems processing time critical information and transactions. However, a solution has been available for many years in the form of NTP, the Network Time Protocol. NTP can be used to synchronise network time clients to an accurate time reference, or NTP server. A stratum 1 NTP server synchronises to a precise external timing reference such as GPS or radio time & frequency transmissions and provides a precise timing resource to a local area network.

There are a number of accurate external timing references available, the most well known being GPS. However, many countries also provide a radio time and frequency reference that can be used for time synchronisation. In the UK, the MSF radio time signal is broadcast from Anthorn, Cumbria, at a frequency of 60 KHz. The German DCF-77 radio time transmissions are broadcast from Frankfurt at 77.5 KHz. The US WWVB radio time reference is transmitted from Boulder, Colorado, at 60 KHz. There are also a number of other countries that provide similar time references. Most broadcasts operate on different frequencies and encode data differently and thus require different tuned antennas and decoding firmware.

Radio time broadcasts have a finite range and are generally restricted to the national boundaries where the broadcast emanates. GPS timing references can operate anywhere in the world. However, the advantage of radio is that generally, a good signal can be obtained indoors close the host NTP time server, whereas a GPS antenna requires a good view of the sky. This can significantly reduce installation costs and simplify NTP server implementation.

A radio based NTP server generally consists of a rack-mountable time server, and a separate radio antenna. The radio antenna is used to receive the radio time and frequency broadcast. The antenna should be located in an area where a good consistent signal can be received.

There are a number of factors that can affect radio time signal reception. If the radio antenna is sited underground or in a basement, signal reception may be significantly impaired. If the antenna is located inside a metal structure or enclosure, again this may also impact signal reception. Also, if the antenna is sited too close to 'electrically noisy' equipment, such as PC monitors, can affect reception. However, usually, provided the antenna is at least 1m from a PC monitor, reception will not be affected.

Most radio time and frequency receivers consist of a ferrite, or bar, antenna contained within a plastic enclosure. The ferrite antenna generally runs the length of the antenna enclosure. Ferrite antennas are unidirectional antennas that have an ideal orientation. The ferrite antenna should be mounted in a horizontal plane at right angles to the source of the time code transmission. For example, if the source of the transmission is north of the antenna location, the antenna ferrite should be mounted horizontally pointing East-West, at right angle to North. In this orientation, the ferrite has the largest area perpendicular to the transmission. If the antenna is rotated, as the angle to the source of transmission reduces, so the sensitivity of the antenna is reduced. Most radio time and frequency transmissions continually broadcast precise time and date information. Data is generally encoded into a series of 60 pulses, one pulse per second. Each pulse represents a data-bit that makes up the current time and date over a period of 1 minute. When a minutes worth, or 60 pulses, have been received, the NTP server can attempt signal decoding. In this manner a time stamp should be received by the time server once each minute. If the signal drops out, or is incorrectly received, then the resulting decode will fail. Good continuous signal reception is required to provide a reliable time reference.

To summarise, a NTP server can provide an organisation with a precise timing reference for synchronising computers and network infrastructure. Time synchronisation between workstation and servers is an important aspect of data and transaction processing in most operating systems. A radio based NTP server is an ideal solution that can be easily installed and implemented to provide a solution to computer network time synchronisation issues.

Rate this Article:

Current: 0 / 5 stars - 0 vote(s).

Article Tags: Time Server, Ntp Server, Ntp Time Server, Time Synchronisation, Time Synchronization, Radio Ntp Server, Windows Ntp Server, Linux Ntp Server, Authoritative Time Server

Article Source: http://www.articlesbase.com/computers-articles/installing-a-radio-referenced-ntp-server-377859.html

Print article

Send to friend

Publish this Article

Author feedback

About the Author:

This article was written by Dave Evans, a computer network design engineer that specialises in computer time and frequency systems. Dave has a number of years experience using NTP with GPS and radio time references. Click here, if you would like more information on NTP server systems.

Submitting articles has become one of the most popular means of generating quality backlinks and targeted traffic to your website. Join us today - It's Free!

Article Comments

Add new Comment

Decoding the Dcf-77 Radio Time Signal
By: David Evans | 06/02/2007 | Hardware
This article describes how the DCF-77 time signal is decoded by NTP server and computer systems to provide an accurate timing reference.

How to Configure an Ntp Network Time Server in Windows 2003
By: Richard n Williams | 21/04/2008 | Networks
This article describes how to configure Windows 2003 to act as an authoritative time server using NTP (Network Time Protocol).

How to Configure a Linux Ntp Server
By: David Evans | 21/02/2007 | Operating Systems
This article discusses how to configure a Linux NTP Time Server to synchronise time with an Internet based public NTP Server.

How to Configure an Ntp Network Time Server in Windows Xp
By: Richard n Williams | 21/04/2008 | Computers
This article describes how to configure Windows XP to act as an authoritative time server using NTP (Network Time Protocol).

How to Configure Windows Server as a Ntp Server
By: David Evans | 22/02/2007 | Networks
This article describes how to configure the Microsoft Windows 2003 and Windows 2000 time service as a NTP time server. It shows how to modify registry entries to configure the Microsoft Windows Time Service. The Windows Time service allows a Windows network to provide synchronisation of all machines within a domain.

What is Time? From Sundials to Ntp
By: Richard n Williams | 22/04/2008 | Networks
Time is an abstract concept. We cannot necessarily see it, touch it or change it, but we are aware that it exists and that is continues to keep passing us by. It has long been thought that time was constant and was the same everywhere in the Universe.

How to Keep Accurate Time on your Computer
By: David Evans | 27/02/2007 | Operating Systems
This article describes various methods of keeping a highly accurate time on your computer. It describes how to utilise Internet time servers, radio and GPS clocks and dedicated NTP server systems.

How to Configure a Windows Time Server
By: David Evans | 28/02/2007 | Operating Systems
This article introduces how to configure the Microsoft Windows 2000 and 2003 operating systems to operate as a SNTP or NTP time server. The article discusses how to change Windows registry entries to configure the Time Service.

Got a Question? Ask.

Ask the community a question about this article:

Q&A Powered by:

Latest Computers Articles

Get the Most Out of Your Nanny Spy Cameras - Use Them For Other Purposes!
By: Nahshon Roberts | 25/07/2008
Lest you think that nanny spy cameras are only good for spying on the nanny, think again. The term is another designation for hidden surveillance cameras, supposedly because these are now more commonly used to monitor childcare providers in an increasingly nanny-paranoid society. Nanny spy cameras are usually...

Analyzing Consumer Electronics Devices
By: James Brown | 24/07/2008
Many consumers are drawn to consumer electronics because of the technology that makes each device perform its mission. While many consumers might not have a technical degree, many have a working knowledge of what the device is equipped with and the selling points of the device after they enter a...

Types of Consumer Electronics
By: James Brown | 24/07/2008
With so many updates and changes made to consumer electronics lately, some consumers are having a difficult time understanding what types of consumer electronics are most popular among middle class Americans and those who live on limited incomes where budget cuts made most consumer electronics seem unaffordable. Families across the...

Benefits of Unlocked Cellular Phones
By: Abe S. | 24/07/2008
You may not know much about your cellular phone other than that you cannot live without it! Your cell phone is your connection to the rest of the world and is a very important tool. Many cell phones are made to use a SIM card - a Subscriber...

How to Start a Business Selling Cell Phones
By: Abe S. | 24/07/2008
In today's unstable economy with reduced income and rising prices, everyone wants to save money if they can. Even if the economy were booming, saving money is always a wise choice. There is no shame in wanting to save as much money as possible when it comes to...

How Can I Work With Sybase Database Tools?
By: Patricia Stevens | 23/07/2008
To use a Sybase server, you are should have Netscape Enterprise Server. You cannot get an access to Sybase from Netscape FastTrack Server. Sybase has both one-line, and multiline drivers on some Unix-platforms. If Sybase has the multiline driver for the concrete Unix-machine, you are obliged to use LiveWire for...

Baselining--Stress Testing--Performance Testing--Oh My--Part TWO-Testing
By: Barry Koplowitz | 23/07/2008
This article is also available as a Podcast on "The ROOT Cause" available on iTunes. Written and Narrated by Barry Koplowitz. This is the second of two articles discussing the topic of Test Environments and Testing Practices. The first one, "Baselining--Stress Testing--Performance Testing--Oh My--Part One--Environments," focused on proper testing environment design....

Page Yield / Cartridge Yield
By: Kwan Lo | 23/07/2008
Page yield is the number of pages that you can print with a printer cartridge. It is also known as cartridge yield. Many cartridge manufacturers use the terms "standard yield" or "high yield" to describe their printer cartridge but each cartridge should have a page yield value. It...

More from David Evans

Use a Ntp Server to Keep Precise Network Time
By: David Evans | 18/07/2008 | Computers
It is quite simple to synchronise every device on your network to an accurate time reference - a NTP time server.

Keeping Accurate Time on Your Computer Using Ntp Servers
By: David Evans | 21/05/2008 | Computers
This article discusses ways in which you can maintain continuously accurate system time on your computer system. It looks at how Internet time references and NTP servers can be utilised for computer time synchronisation.

GPS Systems for Ntp Time Servers and Timing Applications
By: David Evans | 17/05/2008 | Computers
This article describes the components required to utilise GPS for computer timing applications. It also discusses how the GPS system can be used for computer network timing by using the Network Time Protocol (NTP) and NTP time servers.

Time Server Fundamentals
By: David Evans | 10/05/2008 | Computers
A time server is a computer server that obtains precise timing information from an external hardware clock and provides this information to clients across a computer network.

Ntp Time Servers for Precision Timing
By: David Evans | 07/05/2008 | Computers
This article briefly outlines the operation of NTP and some of the terminology associated with the protocol.

Using GPS to Synchronise Computer Systems
By: David Evans | 29/01/2008 | Computers
This article describes how the GPS system can be used to provide an accurate time and frequency reference for NTP servers and computer network time synchronisation.

Maintaining Precise Time on your Computer by Utilising Ntp Servers
By: David Evans | 16/01/2008 | Computers
This article describes how Internet or Intranet based NTP servers can be utilised to maintain accurate time on a computer system.

Common Ntp Server Terminology Explained
By: David Evans | 19/12/2007 | Computers
This article attempts to explain in simple language some of the terminology used in computer timing applications.

Article Categories

Article Marketing

Article Notepad

Stop Duplicate Content

Term Papers

Need Help?

Sign up for our email newsletter

Receive updates, enter your email below

Use of this web site constitutes acceptance of the Terms Of Use and Privacy Policy | User published content is licensed under a Creative Commons License.
Copyright © 2005-2008 Free Articles by ArticlesBase.com, All rights reserved. (0.20, 16)

Installing a Radio Referenced Ntp Server

Article Comments

Related Articles

Got a Question? Ask.

Latest Computers Articles

More from David Evans

Need Help?

Site Links

Webmasters

Business Info

Sign up for our email newsletter