The GPS system is global navigation system introduced by the US military. The system provide navigation and positioning information anywhere on the face of the Earth. The GPS system also provides a highly accurate and precise time and frequency signal ideal for computer timing applications. The GPS system is a orbiting constellation of 24 satellites, each broadcasting time and position information around the globe.
This article describes how the GPS system can be used to provide an accurate time and frequency reference for NTP servers and computer network time synchronisation.
GPS timing information is continuously broadcast by each GPS satellite. GPS time is not affected by leap seconds. Therefore, GPS time is currently about 14 seconds ahead of UTC time. However, offset information is available to readily convert GPS time to UTC time, which is used in NTP server and computer time server systems.
Each GPS satellite transmits information as very low-power radio frequency transmission. Two frequencies are used, one for civilian use coded L1, and one for military use coded L2. The civilian L1 frequency is the most widely used and is transmitted at 1575 MHz. The broadcast GPS signal can easily penetrate less dense material such as plastic, but cannot penetrate higher density materials such as brick.
An antenna is utilised to boost the GPS signal and pass the signal along a coax cable. Ideally, a GPS antenna needs to have as good a view of the sky as possible to receive from as many satellites as possible. Ideally, it should be located outdoors on a rooftop with a good 360-degree un-obscured view of the sky.
GPS antenna systems transmit signals down a coax cable and are sensitive to coax quality and cable length. The coax type and antenna gain determines the cable length that can be utilised by a GPS antenna. Higher quality coax cable generally have much lower attenuation figures and hence provide much longer cable runs between the receiver and antenna. Typically, a low-quality coax can run to 20-30m, while a high quality coax can be used in excess of 100m cable runs. To increase these distances still further, a GPS amplifier can be used to amplify and boost the received GPS signal.
GPS timing systems also utilise a GPS receiver in order to decode the received GPS transmission and convert it to a computer readable format. The GPS receiver processes the transmitted GPS positioning information and provides a readable serial transmission as output. GPS NTP servers and computer time servers may also utilise a precise pulse per second output generated by the GPS receiver to provide ultra-precise timing. The pulse per second timing pulse on most receivers is accurate to within a few milliseconds of UTC.
To summarise, the GPS system is ideal for synchronising NTP server and computer time servers. Accuracies of a few hundred nanoseconds can be reasonably achieved with low-cost GPS receiving equipment.
Got a Question? Ask.
Ask the community a question about this article:
Frequently Asked Questions
Iatomic clocks with different times
By: Bonnie | 22-06-2008
I have 3 atomic clocks in my house, they each have a different time, as much a 4 minutes apart. How is this possible if the settings are automatic and can I synchronize so they all display the same time?
Q&A Powered by:
Latest Computers Articles
Get the Most Out of Your Nanny Spy Cameras - Use Them For Other Purposes!
By: Nahshon Roberts | 25/07/2008
Lest you think that nanny spy cameras are only good for spying on the nanny, think again. The term is another designation for hidden surveillance cameras, supposedly because these are now more commonly used to monitor childcare providers in an increasingly nanny-paranoid society.
Nanny spy cameras are usually...
Analyzing Consumer Electronics Devices
By: James Brown | 24/07/2008
Many consumers are drawn to consumer electronics because of the technology that makes each device perform its mission. While many consumers might not have a technical degree, many have a working knowledge of what the device is equipped with and the selling points of the device after they enter a...
Types of Consumer Electronics
By: James Brown | 24/07/2008
With so many updates and changes made to consumer electronics lately, some consumers are having a difficult time understanding what types of consumer electronics are most popular among middle class Americans and those who live on limited incomes where budget cuts made most consumer electronics seem unaffordable. Families across the...
Benefits of Unlocked Cellular Phones
By: Abe S. | 24/07/2008
You may not know much about your cellular phone other than that you cannot live without it! Your cell phone is your connection to the rest of the world and is a very important tool. Many cell phones are made to use a SIM card - a Subscriber...
How to Start a Business Selling Cell Phones
By: Abe S. | 24/07/2008
In today's unstable economy with reduced income and rising prices, everyone wants to save money if they can. Even if the economy were booming, saving money is always a wise choice. There is no shame in wanting to save as much money as possible when it comes to...
How Can I Work With Sybase Database Tools?
By: Patricia Stevens | 23/07/2008
To use a Sybase server, you are should have Netscape Enterprise Server. You cannot get an access to Sybase from Netscape FastTrack Server. Sybase has both one-line, and multiline drivers on some Unix-platforms. If Sybase has the multiline driver for the concrete Unix-machine, you are obliged to use LiveWire for...
Baselining--Stress Testing--Performance Testing--Oh My--Part TWO-Testing
By: Barry Koplowitz | 23/07/2008
This article is also available as a Podcast on "The ROOT Cause" available on iTunes. Written and Narrated by Barry Koplowitz.
This is the second of two articles discussing the topic of Test Environments and Testing Practices. The first one, "Baselining--Stress Testing--Performance Testing--Oh My--Part One--Environments," focused on proper testing environment design....
Page Yield / Cartridge Yield
By: Kwan Lo | 23/07/2008
Page yield is the number of pages that you can print with a printer cartridge. It is also known as cartridge yield. Many cartridge manufacturers use the terms "standard yield" or "high yield" to describe their printer cartridge but each cartridge should have a page yield value. It...
Computers 
