The Global Positioning System (GPS) consists of a number of orbiting satellites that provide precise positioning information for navigation purposes. Positioning is calculated by using accurate timing information and triangulation. However, the accurate timing system can also be used for computer network time synchronisation purposes. Each orbiting satellite has an onboard atomic clock that can provide highly precise time. This article describes how precise GPS timing information can be utilised to provide network timing via GPS NTP servers. It also discusses the type of equipment required to process GPS signals for time and frequency applications.
Time is referenced to Universal Coordinated Time (UTC), which is the same worldwide and does not vary with time zones. The GPS satellites continuously transmit precise time information. GPS time is not affected by leap seconds and is currently 14 seconds ahead of UTC time. GPS time can easily be adjusted to provide UTC time for computer network time synchronisation. The GPS satellites broadcast a very weak low-power radio signal. The signal has two frequencies, L1 and L2. L1 is intended as a civilian GPS band broadcast at 1575.42 MHz. L2 should provide stronger signal transmissions in the future. The signal travels in a straight line and can pass through clouds, glass and plastics but is blocked by objects such as metal and brickwork. Therefore, ideally, a GPS antenna requires a good view of the sky. The ideal location for a GPS antenna is on rooftop with a good view of the sky. If it is impractical to locate a roof-mounted antenna, installation on the side of a building can be adequate.
The GPS system provides a subscription-free accurate timing resource. Many computer networks utilise the GPS clock as an accurate timing reference for computer synchronisation. Precise GPS NTP server systems utilise GPS reference clocks as an external synchronisation source. The GPS system can supply highly precise time and frequency information accurate to a couple of nanoseconds. This accuracy is generally more than enough for most computer network timing applications.
Most GPS receivers transmit time and positioning information in a serial format using the standard NMEA protocol. Information is transmitted as sentences of character strings. Additionally, a highly accurate timing pulse is generated which marks the beginning of each second. This timing pulse can be converted to a RS232 signal level and fed into a RS232 control line interrupt to provide a precise timing reference. When the timing pulse is combined with the NMEA output sentences, a very accurate timing reference becomes available for use by NTP servers or computer timing equipment.
Got a Question? Ask.
Ask the community a question about this article:
Frequently Asked Questions
Iatomic clocks with different times
By: Bonnie | 22-06-2008
I have 3 atomic clocks in my house, they each have a different time, as much a 4 minutes apart. How is this possible if the settings are automatic and can I synchronize so they all display the same time?
Q&A Powered by:
Latest Computers Articles
Get the Most Out of Your Nanny Spy Cameras - Use Them For Other Purposes!
By: Nahshon Roberts | 25/07/2008
Lest you think that nanny spy cameras are only good for spying on the nanny, think again. The term is another designation for hidden surveillance cameras, supposedly because these are now more commonly used to monitor childcare providers in an increasingly nanny-paranoid society.
Nanny spy cameras are usually...
Analyzing Consumer Electronics Devices
By: James Brown | 24/07/2008
Many consumers are drawn to consumer electronics because of the technology that makes each device perform its mission. While many consumers might not have a technical degree, many have a working knowledge of what the device is equipped with and the selling points of the device after they enter a...
Types of Consumer Electronics
By: James Brown | 24/07/2008
With so many updates and changes made to consumer electronics lately, some consumers are having a difficult time understanding what types of consumer electronics are most popular among middle class Americans and those who live on limited incomes where budget cuts made most consumer electronics seem unaffordable. Families across the...
Benefits of Unlocked Cellular Phones
By: Abe S. | 24/07/2008
You may not know much about your cellular phone other than that you cannot live without it! Your cell phone is your connection to the rest of the world and is a very important tool. Many cell phones are made to use a SIM card - a Subscriber...
How to Start a Business Selling Cell Phones
By: Abe S. | 24/07/2008
In today's unstable economy with reduced income and rising prices, everyone wants to save money if they can. Even if the economy were booming, saving money is always a wise choice. There is no shame in wanting to save as much money as possible when it comes to...
How Can I Work With Sybase Database Tools?
By: Patricia Stevens | 23/07/2008
To use a Sybase server, you are should have Netscape Enterprise Server. You cannot get an access to Sybase from Netscape FastTrack Server. Sybase has both one-line, and multiline drivers on some Unix-platforms. If Sybase has the multiline driver for the concrete Unix-machine, you are obliged to use LiveWire for...
Baselining--Stress Testing--Performance Testing--Oh My--Part TWO-Testing
By: Barry Koplowitz | 23/07/2008
This article is also available as a Podcast on "The ROOT Cause" available on iTunes. Written and Narrated by Barry Koplowitz.
This is the second of two articles discussing the topic of Test Environments and Testing Practices. The first one, "Baselining--Stress Testing--Performance Testing--Oh My--Part One--Environments," focused on proper testing environment design....
Page Yield / Cartridge Yield
By: Kwan Lo | 23/07/2008
Page yield is the number of pages that you can print with a printer cartridge. It is also known as cartridge yield. Many cartridge manufacturers use the terms "standard yield" or "high yield" to describe their printer cartridge but each cartridge should have a page yield value. It...