Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
Tenderall Fan Co. is a supplier of plastic and fiberglass fans and blowers for industry applications where aggressive media must be moved. Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.
Applications for Corrosion and Chemical Resistant Fans include:
* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical Labs
On most campuses there is a certain number of fume hoods that are used for various acids testing to break down materials for analysis. HCl and Perchloric Acid are the ones used most commonly. Fume hoods and Chemical resistant fans are needed.
* High Technology Semiconductors, PCBs, and Photonics
Chip makers use acids to clean metal before they mount thin film on the metal upon which they lay circuitry.
* Printed Circuit Board Industry
FRP fans are frequenly used for clean rooms.
* Waste water and Sewage Treatment Plants
Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor problem that has to be treated. Depending on the size of these stations corrosion resistant fans are needed. This gas can also be very volatile and will require explosion proof motor and static grounding of the fan housing by graphite impregnation that Canada Blower can provide too.
* Salt Air and High Humidity Environments
Any facility near the salt air is also a good place for plastic fans and the humidity will eat through metal fans.
* Steel and Wire Manufacturing
As the steel comes in and sits at these plants impurities and scale develop on the steel or the wire that needs to be cleaned off before the wire or steel can be properly worked with. Acid baths are needed for this and the corrosive fumes coming off these aced baths are highly corrosive...
* Stainless Steel and other Metal Production Facilities
In tha annealing and Pickling process acid baths are used to strip scale off the steel after the annealing process that smoothed out grain patterns that may have formed during the annealing process. Later on acids are used again to support oxidation.
* Chemical and Petrochemical Industries
* Jet Engine and Power Plant Turbine Manufacturing or Servicing
Molted Salt tanks are often used here to descale metals coming out of hot furnaces. Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid baths as does nickel plating.
* Electroplating and Metal Finishing
These industries use fiberglass fans and fume scrubbers.
* Scrubber OEMs and Designers
FRP fans are standard components in fiberglass srubber designs.
* Industrial Galvanizers
* Printing Press Service Shops
* Chromatography
* Food Processing
Often in the food processing industry they wash equipment down with acids and other corrosives. Also they use fans for the humidity that builds up from the drying process of foods.
* Pulp and Paper Industry
Pulp and paper manufacturers are very wide users of fiberglass and other plastics fans for their boilers, exhaust and filtration systems.
Tenderall fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. Tenderall fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.
Tenderall fiberglass fans housings are manufactured from premium grade, fire resistant resins that provide excellent corrosion resistance in most chemical environments. Tenderall FRP impellers are made of premium vinyester that combines corrosion resistance with structural integrity under the stress of rotation.
Tough applications mean tough fans and blowers by Tenderall Fan Co. Tenderall Fan Co. is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Tenderall Fan Co. also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
For additional information please refer to http://www.tenderall.com.
Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
http://www.tenderall.com/blower/index.html
- Related Videos
- Related Articles
- Ask / Related Q&A
- Research Report on the LED industry of China and the World from 2009 to 2010
- Fabric permeability-the crucial property in fabric air duct industry
- Rust Inhibitors and Rust Protection for Domestic and Industrial Equipments
- Patents and Ethics in the Pharmaceutical Industry
- Hyderabad Sugar Industry Its Problems & Prospectus
- The Characteristics That Make Industrial Ceiling Fans Stand Out
- Industrial Sbc Meets Different Industrial Needs With Higher Flexibility
- Gear Boxes : Its Scope in Different Industry
Trends in Terms of Venture Financings in Silicon Valley
By: Tyler Green | 02/12/2009Trends in Terms of Venture Financings in Silicon Valley - Q2 2009 (Abhishek Uppal) Venture financings for 89 companies headquartered in the Silicon Valley that raised money in the second quarter of 2009. Overview Down rounds exceeded up rounds 46% to 32%, with 22% flat. This was slightly better than 1Q09 when down rounds outpaced up rounds 46% to 25%, with 29% flat. The past two quarters are the only quarters since 4Q03 in which down rounds have exceeded up rounds. There is an...
Canon, HP and OCE a new global photocopier force
By: Christian Fitzgibbon | 02/12/2009Hewlett Packard and Canon have collaborated. Canon has put in a convincing takeover bid for OCE. Canon is set to top the world of photocopiers.
Corporate Team Building - key to running a successful business
By: M4rtinroche | 02/12/2009As the credit crunch has taken hold many companies have been unable to offer pay rises and bonuses that in previous years have been a motivating factor for employees contributing to the business success. Companies are now looking at ways in the absence of the financial stability to offer remuneration benefits, at motivational techniques that will enable them to engender the commitment and willingness from employees to work as a team unit and contribute to the businesses ongoing success.
Secrets Your Agent Wont Tell You About a Budget Cruise
By: Liz Hendricks | 02/12/2009Cruise vacations are a fabulous way to discover the world and indulge in luxury. But what they don't show in the glossy travel brochures could hurt you. This is a list of dirty little secrets that you need to be aware of before you book a budget cruise and accidentally blow your budget.
Easy Flight Cheaper Cost
By: Ade Adenekan | 01/12/2009The current ever biting economic meltdown affects all the business industries and the airlines are no exception since they continue to record less passengers on board by the day and this was what made to them to device a means of enticing passengers on their different cabins and this is what the author discusses here
Critical Factors for Achieving Commercial Breakeven in Renewable Energy
By: Tyler Green | 01/12/2009Critical Factors for Achieving Commercial Breakeven in Renewable Energy (Abhishek Uppal) There are a number of key sensitivities that affect the point at which renewable technologies hit the commercial breakeven points. In their research, analysts have pointed out how four sensitivities are particularly important: The regulatory framework Regulation is important for low carbon technologies. These technologies can be expensive and costs need to be brought down the learning curve....
Opportunities in Solar Technology
By: Tyler Green | 01/12/2009Opportunities in Solar Technology (Abhishek Uppal) Solar technology harnesses solar energy to create electricity and heat. Although we count on the sun for all of our energy, solar energy conventionally refers to two core technology groups: Solar Photovoltaic (PV): Where a solar cell is used to convert light into electric current using the photoelectric effect. Photons from sunlight hit the solar panel, knocking electrons loose, which flow through the multi-layered cell creating...
Understanding Electricity Markets
By: Tyler Green | 01/12/2009Understanding Electricity Markets (Abhishek Uppal) The structure of electricity markets Electricity is a vital good with a number of characteristics that set it apart from other commodities: It is difficult to store and has to be available on demand; It is not normally possible to ration electricity or have customers queue for it; Demand and supply vary continuously, within a very short timeframe. There are five main participants in electricity markets: Power generators, wh...
Industrial Power Roof Ventilators
By: Oleg Chetchel | 15/10/2009 | HealthDeep mines, underwater tunnels, and other subterranean and submarine environments require elaborate mechanically operated systems for maintaining the air supply in a healthful condition. The lives of those working in, or traveling through, such areas depend upon a constant supply of fresh air; not only must the systems used be highly efficient, but there should be provision for emergencies in case of failure of the apparatus in operation.
High Pressure Regenerative Blowers
By: Oleg Chetchel | 13/10/2009 | BusinessCompressor specifications to consider when selecting regenerative blowers include: maximum free air delivery, maximum pressure, and motor power. Free air delivery (FAD) is the actual air produced by the compressor pump at the rated pressure. Maximum FAD is usually rated at a pressure somewhat less than the maximum pressure available. Volume per unit time is the unit of measure. Maximum pressure is the maximum level of air pressure generated by the compressor. Typically, these units are referenc
Radial Blowers
By: Oleg Chetchel | 08/10/2009 | ConstructionA Radial fan is used for so many purposes these days whether that be for items found in most households or in cars or factories. They play an integral part in our everyday lives and will do so for many years to come.
Industrial Process Ventilation
By: Oleg Chetchel | 07/10/2009 | Ask an ExpertIndustrial fans include several types such as duct fans, roof and ceiling ventilators, wall mounted fans, pressure blowers, and freestanding units with different mounting options. For extreme conditions and plants, drum fans can be used to move even larger amounts of air. These types of fans come with wheels attached and can be rolled to the area that circulation is needed the most. Some manufacturers even sell just the fan heads for a more freedom and a reduced assembly and cost on the company.
Industrial Ventilators and Blowers
By: Oleg Chetchel | 06/10/2009 | BusinessIndustrial blowers are mainly used to circulate the movement of air and gas in ventilation applications. Their main function is to replace impure or contaminated air with fresh air by swirling it around. Almost every industry, including agricultural, chemical, medical, oil and gas, automotive, food processing, mining and construction use blowers for different purposes such as drying, reducing heat levels, reducing smoke and odors, processing and controlling gaseous fumes.
Ventilation by Forced Draft
By: Oleg Chetchel | 01/10/2009 | Ask an ExpertForced ventilation is used to control indoor air quality. Excess humidity, odors, and contaminants can often be controlled via dilution or replacement with outside air. However, in humid climates much energy is required to remove excess moisture from ventilation air.
Ventilators, Fans and Blowers
By: Oleg Chetchel | 30/09/2009 | TechnologyCentrifugal blowers come in a number of forms of which the most common is the squirrel cage blower. The common factor is the air is moving perpendicular to the axis of the part that is moving the air. Typically, the air is drawn in through the side of the unit, turns at low speed to encounter the inside of a spinning cylinder with ribs or vanes around the wall of the cylinder which fling the air out and away where it is captured and aimed through an outlet much smaller than the inlet.
Centrifugal Blowewr vs Axial Fan
By: Oleg Chetchel | 22/09/2009 | BrandingVariable Speed Fans – All of the fans described above can be used in conjunction with a variable speed driver. This might be an adjustable frequency AC controller, a DC motor and drive, a steam turbine driver, etc. Flow control by means of variable speed is typically smoother and more efficient than by means of damper control. Significant power savings (with reduced cost of operation) are possible if variable speed fan drives are used for applications that require reduced flow operation.