Prevent Air Bubbles and Bug Holes in Concrete When Casting Cement Stone Molds
After over nineteen years in the concrete stone mold business, some of our do-it-yourself stone, paver and tile making customers and homeowners using our moulds still have problems with air bubbles or bug holes in the cast concrete products they make. Almost one-hundred percent of the time, it's because they don't follow the simple, free instructions provided with each purchase. So here are the instructions and techniques again in the form of a Home Improvement DIY article.
Is a mold release really necessary when casting concrete? –
We always suggest using a mold release of some kind, even when using rubber molds. Mold release will help prolong the life of concrete, cement, or plaster molds. Using a mould release will also make de-molding the stone, tile, pavers, or other items you are duplicating, an easier and faster chore.
Make a home-made liquid mold release for use with Plaster of Paris, Moulding Plaster and other Plasters –
When working with plaster, a simple mixture of a tablespoonful of liquid dish detergent to a cup of water makes a good release agent. Keep in mind that different plasters offer different shrinkage properties. The less a plaster shrinks, the more difficult it may be to de-mold the plaster item from a plastic or other semi-rigid mold. Be sure to read the instructions and properties on the package of all plasters before choosing one for your project. We also recommend using a soapy release when working with rubber molds and plaster. It makes a cleaner release and smoother finished piece, as well as helping to keep the plaster from sticking to the rubber molds--- thus saving cleaning time and effort.
How to Make a Mold Release for use with Concrete and Cement –
There are a number of commercially prepared concrete mould releases on the market. We actual offer our customers two types--- a water-based and an oil-based mold release. We market it as a convenience to our customers. A light vegetable oil works just about as good as a commercial blend. The commercial releases may contain a suspended wax or other agents to make it easier to use, or offer other benefits.
Regular vegetable oil is fine, with a "light" vegetable oil being even better. But don't worry about that. The problem with air bubbles in concrete castings is seldom the type of release used--- it is usually the quantity left behind before pouring. It's usually excess release, or it's too much vibrating used to dislodge any air attached to the surface of the mold--- or should I say between the mould and the freshly poured concrete. Have you heard the old saying about "too much of a good thing"? That's normally the problem. With too much vibration, you can actually introduce air bubbles into the mix. And over-vibrating--- especially with only half of the concrete batch poured into the mold first, can certainly cause excess air.
How much oil should be left to coat the mould? –
For best results, be sure to wipe most of the oil out of your molds prior to filling them with concrete. You need to be especially aware of the low crevices of the mold where the oil can puddle. You should barely be able to see that there is a coating on the mold. Then fill your mold about half to three-quarters with your concrete mix. On a flat, level surface, lift each side of the mold about a half-inch or so and let it fall back flat to the table or other surface you are using. If it is a larger mold, say over 12" in diameter lift it higher so that the center gets the benefit of the vibration as well. Do this about four or five times on all four sides. Then fill the mold to the finished depth that you want. This time, lift all four corners one at a time four or five times, letting them fall back down. Now shake the entire mold a couple of times in each direction to be sure that the concrete is level. Cover with plastic sheeting and wait for it to harden. This technique allows you to dislodge any air bubbles from what will be the surface of your stone.
Why is there air in my concrete mix? –
Yes, having a certain amount of air in your mix is actually desirable... especially if the stone is for an exterior application. This is called air entrainment. It allows a space for any moisture within the concrete to expand and contract in a freezing environment. This is called freeze-thaw. When you use our mix additives, there is actually an air-entrainment agent in the additive to put air into the concrete! Normally, air entrainment in concrete and cement should only be about 5% though. That air really has little to do with "bubbles" or what are called "bug holes" in the industry to appear on the surface of your stone casting.
Think of how happy your arms are going to be now that they don't have to vibrate that heavy concrete as much!
Questions and Answers
Article Tags:
bug holes
,casting concrete
,concrete molds
,air bubbles
,cement pin holes
,stone
,tile
,concrete tile
,stone finishing
,manufactured stone
,cement tile
,italian tile
Discover coconut oil benefits! Coconut oil is used in many ways. Some use it for making homemade soap. It has outstanding skin care properties. Learn different types of coconut oil and choose the best for you. Homemade skin care products made with coconut oil differ, greatly, from commercial products with harsh foaming agents. Don't miss this important skin care and soap making information!
Ever since I was a child, it has always bothered me why certain disparities between men and women exist when it has long ago been established by the Almighty that every human being has been created equal.
In my hometown, the natives of the land and the Malays would usually engage in trading and sell goods that are considered homegrown in their respective places. This is made possible because it would only take a ferry-ride to reach their destination. Hence, the bartering of goods usually happens on the shore; and, most of the time these goods would include textiles. They were not just ordinary textiles, though. They were first class cloths interwoven by the very hands of man.
While origami is native to the Japanese, the reach of this paper craft has gone globally, even to us Americans who find the sequences of folding paper almost intoxicating. Of particular importance is how to follow the easy origami crane paper folding process; a treasured tradition that is almost considered holy in Japan.
In the event you like arts and crafts and choose to decorate your stuff at household then all you'll need is a computer, a printer and some specific waterslide decal paper. This short article explains the kind of tasks you could do and explains the way to do it. This article will explain to you concerning the four kinds of waterslide paper, their differences, how to use them and some well-known tasks.
Should you use Portland cement or bags of pre-mixed concrete? Or bags of pre-mixed Sand Mix? What cement should be used to cast concrete into deep molds, like for driveway pavers? How about thin cement tile molds? Or to renew a coating on an existing cement slab? These questions are answered here, and the reasons are given for each of the choices.
Save ninety-percent off of the retail prices of Travertine tile and stone by making it yourself with concrete, molds, colorant and these simple techniques. Make either a rough of smooth cut style of Travertine in any color you'd like, for both interior and exterior applications.
Below describes six techniques to create a stone corner.
Thanks to companies that sell concrete molds directly to consumers, they can make building products right in their garage, basement, or shed for pennies each! But what if a thinner item is needed than a mold was made for? This article shows how to make uniform thickness stone with any depth of mold.
Discuss this Article
