PST Issues when Stored Over LAN/WAN Link

<h1>PST Issues when Stored Over LAN/WAN Link</h1>Author: <a title="Christa Atwater" href="http://www.articlesbase.com/authors/christa-atwater/168681.htm">Christa Atwater</a> Microsoft designed .pst files with the objective of allowing a user to maintain local copy of their email messages on computer. When not configured to Microsoft Exchange Server, PST is basically a message store. But they cannot serve as an enterprise solution and prove unsupported over a WAN or LAN link. If you attempt to save it over network, in most of the situations, it gets corrupt and becomes inaccessible. Thus, it is recommended to opt for different solutions when you require a shared message store. However, in case of PST file corruption, you can scan and repair your damaged file using PST Repair tools. In an enterprise environment, you can although specify UNC (Universal Naming Convention) or network directory that could act as the storage location for PST file, but saving the file directly on a network link introduces file corruption errors in it. Basic Reason why PST is unsupported over WAN or LAN link Different data access methods used by Microsoft Outlook and operating system Contrary to the method that WAN or LAN links use to access data, PST files use file-access drive method. WAN and LAN links use network-access-driven methods. In file-access-driven method, computer system uses certain operating system provided file access commands in order to read/write data to the file. However, in network access-drive methods operating system provides similar commands, but for sending or receiving data from a networked computer system. Now when you store a PST file over a network link, Outlook and operating system access data in dissimilar ways. The same file is simultaneously tried to read/write information using file commands and network commands. As a result of this, it takes a large amount of overhead and time to access data from PST file increases. You might observe delay in performing operations. In addition, the write operations take about four time longer time than read operations. Also if connection fails or degrades, it could result into damaged PST file, which requires PST Recovery solutions. An Example of slow performance You send an email message to about 100 different users, having same PST file as the delivery option that is stored on a file server. Suppose for receiving the message, few of these users need to extend their PST files which requires an extra allocation on disk using NTFS. While it occurs, it locks the whole volume. This is because while this, MFT is updated and free space is allocated. So, for each user, all other 99 users have to wait for performing I/O operations. The above example shows that when you store PST file on a shared network, it might stop responding for a long interval of time. Thus, you observe several problems occurring at client sides and the basic reason is server queuing. PST Corruption The server services uses work times to perform tasks like extending the PST file. The work times use nonpaged pool (NPP) of kernel resource to get the required space After these work times get queued up, these are handled by server service worker threads. The disk subsystem gets all I/O requests, which are sent by server service. Now if disk subsystem fails to respond in time, all requests get queued up in the server work queues. For any reasons, if network failure occurs or degrades while these requests are queued up, PST gets affected. It could get corrupt and inaccessible. Solution <ul> <li>For PST Recovery an inbuilt tool is available included in Outlook installation- Inbox Repair Tool, also known as scanpst.exe. The tool is located at Hard Drive Letter:\Program Files\Common Files\System\MSMAPI\LocaleID (which is 1033 for the USA or similar) in Outlook 2003 and earlier versions. In Outlook 2007, it is located at Hard Drive Letter:\Program Files\Microsoft Office\OFFICE12</li> <li>If Inbox Repair Tool fails to repair the damaged PST file, you should use commercial <a href="http://www.repair-outlook-pst.com" title="PST Repair Software">PST Repair</a> applications. These are file scanning tools for damaged PST designed with advanced technology to repair PST files. Such application perform safe and complete repair and provide safe restoration of data. You can use these products in any case of PST file corruption. </li> </ul> Stellar Phoenix <a href="http://www.repair-outlook-pst.com" title="Outlook PST Repair software">Outlook PST Repair</a> is the comprehensive product built with powerful technology to repair and restore damaged Outlook PST file. This is a read-only PST Recovery tool that supports file repair for PSTs created with Outlook 2007, 2003, 2002 and 2000. With advanced repair options, interactive interface and complete documentation, it is compatible with Windows Vista, XP, 2003, 2000 and NT. It also offers PST password recovery and Split PST functionalities.About the Author: Axel Culver has passion for writing Technical article. He is right now writing articles related to software like <a href="http://www.repair-outlook-pst.com">Repair Outlook PST</a> and PST file recovery. He is also a professional writer and has written many blogs, article, press releasing and content for many websites.
 
For more information, visit: <a href="http://www.repair-outlook-pst.com"> <a target="_blank" href="http://www.repair-outlook-pst.com">http://www.repair-outlook-pst.com</a></a>
Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/data-recovery-articles/pst-issues-when-stored-over-lanwan-link-999816.html" title="PST Issues when Stored Over LAN/WAN Link">PST Issues when Stored Over LAN/WAN Link</a>

Microsoft designed .pst files with the objective of allowing a user to maintain local copy of their email messages on computer. When not configured to Microsoft Exchange Server, PST is basically a message store. But they cannot serve as an enterprise solution and prove unsupported over a WAN or LAN link. If you attempt to save it over network, in most of the situations, it gets corrupt and becomes inaccessible. Thus, it is recommended to opt for different solutions when you require a shared message store. However, in case of PST file corruption, you can scan and repair your damaged file using PST Repair tools.

In an enterprise environment, you can although specify UNC (Universal Naming Convention) or network directory that could act as the storage location for PST file, but saving the file directly on a network link introduces file corruption errors in it.

Basic Reason why PST is unsupported over WAN or LAN link

Different data access methods used by Microsoft Outlook and operating system

Contrary to the method that WAN or LAN links use to access data, PST files use file-access drive method. WAN and LAN links use network-access-driven methods. In file-access-driven method, computer system uses certain operating system provided file access commands in order to read/write data to the file. However, in network access-drive methods operating system provides similar commands, but for sending or receiving data from a networked computer system.

Now when you store a PST file over a network link, Outlook and operating system access data in dissimilar ways. The same file is simultaneously tried to read/write information using file commands and network commands. As a result of this, it takes a large amount of overhead and time to access data from PST file increases. You might observe delay in performing operations. In addition, the write operations take about four time longer time than read operations. Also if connection fails or degrades, it could result into damaged PST file, which requires PST Recovery solutions.

An Example of slow performance

You send an email message to about 100 different users, having same PST file as the delivery option that is stored on a file server. Suppose for receiving the message, few of these users need to extend their PST files which requires an extra allocation on disk using NTFS. While it occurs, it locks the whole volume. This is because while this, MFT is updated and free space is allocated. So, for each user, all other 99 users have to wait for performing I/O operations.

The above example shows that when you store PST file on a shared network, it might stop responding for a long interval of time. Thus, you observe several problems occurring at client sides and the basic reason is server queuing.

PST Corruption

The server services uses work times to perform tasks like extending the PST file. The work times use nonpaged pool (NPP) of kernel resource to get the required space After these work times get queued up, these are handled by server service worker threads. The disk subsystem gets all I/O requests, which are sent by server service. Now if disk subsystem fails to respond in time, all requests get queued up in the server work queues. For any reasons, if network failure occurs or degrades while these requests are queued up, PST gets affected. It could get corrupt and inaccessible.

Solution

For PST Recovery an inbuilt tool is available included in Outlook installation- Inbox Repair Tool, also known as scanpst.exe. The tool is located at Hard Drive Letter:Program FilesCommon FilesSystemMSMAPILocaleID (which is 1033 for the USA or similar) in Outlook 2003 and earlier versions. In Outlook 2007, it is located at Hard Drive Letter:Program FilesMicrosoft OfficeOFFICE12
If Inbox Repair Tool fails to repair the damaged PST file, you should use commercial PST Repair applications. These are file scanning tools for damaged PST designed with advanced technology to repair PST files. Such application perform safe and complete repair and provide safe restoration of data. You can use these products in any case of PST file corruption.

Stellar Phoenix Outlook PST Repair is the comprehensive product built with powerful technology to repair and restore damaged Outlook PST file. This is a read-only PST Recovery tool that supports file repair for PSTs created with Outlook 2007, 2003, 2002 and 2000. With advanced repair options, interactive interface and complete documentation, it is compatible with Windows Vista, XP, 2003, 2000 and NT. It also offers PST password recovery and Split PST functionalities.

Axel Culver has passion for writing Technical article. He is right now writing articles related to software like Repair Outlook PST and PST file recovery. He is also a professional writer and has written many blogs, article, press releasing and content for many websites.

For more information, visit: http://www.repair-outlook-pst.com

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/data-recovery-articles/pst-issues-when-stored-over-lanwan-link-999816.html

Article Tags: Pst Repair, Pst Recovery, Repair Pst, Pst Repair Tool, Outlook Pst Repair, Outlook Pst Recovery, Stellar Phoenix, Repair Outlook Pst, Pst File Repair, Repair Pst Files, Repair Corrupt Outlook Pst, Damaged Pst Repair, Corrupted Pst Repair

Related Articles
Related Q&A

Latest Data Recovery Articles
More from Christa Atwater

nickel-cadmium batteries HP NC6000 Battery

By: johnsunvalley | 06/01/2010
nickel-cadmium batteries HP NC6000 Battery

How to Recover Deleted Outlook Contacts?

By: MOHIT MATHUR | 06/01/2010
Microsoft Outlook Contacts folder is one of the most important storage for few. The folder keeps critical business contact information with whom you want to communicate. It comprises of attributes, like e-mail addresses, phone numbers, important dates, pictures, and more. Outlook contacts might get lost due to unfortunate events of accidental deletion. Loss of such a significant information can set data loss situations. To recover them back you need Deleted Email Recovery softwares.

Why You Must Have a Data Loss Prevention Strategy?

By: Bury Shane | 06/01/2010
There is no question that world of the computers has evolved in monolithic strides, that most of the data/information is processed through computers. Almost all of the organizations, such as IT companies, financial firms, and hospitals, store their data digitally in computer databases.

Msvcr90 Dll Runtime Error - Try This Now !

By: Michael Golbraich | 05/01/2010
No doubt you've observed that the windows system may not always behave as you want it to; if you're frantically searching for a way to fix an msvcr90 dll runtime error, we are here to help you. If you'll take a moment to scan this information, you can soon do away with a wide variety of windows issues - without outside help.

Msi Dll Missing ? - Pc Errors Repair !

By: Michael Golbraich | 05/01/2010
Do error messages have you seeing red? fortunately, there is a simple method that you can use to repair an msi dll missing error even in the case you have a beginner's familiarity with pcs. If you'll take a moment to scan this information, you can soon do away with these windows problems and others - and there's no need to call in an expensive repair service.

Runtime Error 2281 - Be Careful !

By: Michael Golbraich | 05/01/2010
Frustrated by error messages? actually, there's a simple method that you can use to fix a runtime error 2281 even for those who have only very basic computer knowledge. Devote a few minutes to reading what follows, and i'd like to tell you an easy and efficient solution to put an end to many pc troubles.

Load Needed For Dll Files ? - Repair It Now !

By: Michael Golbraich | 05/01/2010
Errors got you down? all those needing to find a way to repair a load dll problem - invest a few moments and take a look at the information that follows. It's not necessary to hire an expensive technician - a better idea is to simply scan these few paragraphs - it's the cheap and effective way to go!

Runtime Error 2277 - Stop It Now !

By: Michael Golbraich | 05/01/2010
Does your computer have you frustrated? these guidelines should help you fix a runtime error 2277 and an assortment of other troubles you might be bothered with occasionally. If you'll take a moment to scan this information, you'll have the ability to take care of a wide variety of windows issues - it's easy when you know how.

Issues in Outlook PST file after Upgrading to Outlook 2007

By: Christa Atwater | 29/06/2009 | Data Recovery
Outlook 2007 is the latest version of Microsoft Outlook. The new features that it provides are calendar snapshots, integrated RSS aggregator, programmability features etc. In addition, this version is considered to be safer as compared to its earlier versions. But after your upgrade to Outlook 2007, you receive some sort of Outlook file corruption (also known as PST) errors. Thus, you require restoring from your recent PST backup. But at times, you observe backup as damaged, not updated or absen

EDB Corruption Due to Improper Termination of Information Store Service

By: Christa Atwater | 25/06/2009 | Databases
The common reasons of EDB (Exchange DataBase) file corruption are improper system shutdown due to operating system malfunction, system crash, and hardware failure or power outage. If Exchange Server’s Information Store Service gets terminated inappropriately, the EDB file may get corrupt and become inaccessible. This behavior makes all your critical data inaccessible and result as serious data loss. You need to go for EDB Recovery tools to solve this issue. When you try to start Micro

Damage to Srs.edb File may Corrupt EDB file

By: Christa Atwater | 19/06/2009 | Data Recovery
Microsoft Exchange Server allows you to migrate other email systems to Exchange Server. For the migration process to completely successfully, the Site Replication Services (SRS) is required. It is a service that is responsible for exchanging the directory information between Microsoft Exchange Server and Active Directory. In some situations, the migration process may not complete successfully due to corruption to the Srs.edb file and it may damage your Exchange Server Database (EDB) file.