Home Painting Ideas for DIY Enthusiasts

Home painting is not everyone's cup of tea. But all of us should give it a try because it gives immense pleasure while doing so. Here are some useful tips that would help you give your walls a proper finish.

Do the preparation

• The very first thing you need to do is to wash down all the walls, which you want to paint. You can take the help of a pressure washer. It can be taken on rent from any store. After completing the washing process, take a scraper and remove all the chipped areas and loose paintings. No need to scrap the whole wall. But the uneven areas need to scraped as they create problems while painting.
• Next thing to do is to calculate the area of the wall by square footage so that you can determine the amount of paint required. Buy paint in 5-gallon pails, rather than gallons to save more money.

Collect your tools

• You will need painting brushes and rollers during painting. What type and how many brushes you need can be best decided by consulting your local paint store. For oil based paints, you can opt for natural or synthetic bristles, while you can use synthetic bristles with latex paint. The same rule applies while selecting rollers.
• Don't forget to purchase some painter’s tape. It is a blue tape that comes in different widths and can be easily removed without messing up your paint job.

Precautions before applying

• Don't start painting out of the paint cans. Because during painting it will remain open and come in contact with air, that would dry it out, thus making the paint difficult to apply. Also the brush or roller will take foreign particles like dirt into the paint that will enter your paint and can change the color as you go long.
• Painting should be started from the edge of the wall and move towards the middle. Most of us do just opposite and face problems. If you start painting with a new can of paint in the middle of the wall, then there are chances of differences in the color and that will look more prominent in the middle of the wall. Therefore with each new can of paint, start painting from the edges.
• Before starting painting, dip you roller in water for latex paints and in solvent for oil based paints. Either you use a pan or a 5-gallon bucket, roll it out a little to make sure it isn’t dripping. You don’t need to go all the way from the top to the bottom as you paint.

How you should apply?

• It is good to apply the paint in a N or Y pattern. Then apply in columns up and down smoothing out all the edges or ridges. Don’t try to stretch the paint, and make sure you have enough amount of paint on the paint roller to give it a good coat. In case of applying more than one coat, the first coat should be completely dry before applying a new coat of paint.
• It is always difficult to paint the corners. If you are careless you light see paint dripping from corners later. Get close to the corners but but don’t scrape the roller against the corner. It will cause drips. Always keep a paintbrush ready for taking care of any drips or ridges you leave behind. It is better to do this rather than trying to fix it later.