How To Lay Ceramic Tile Like A Professional

<h1>How To Lay Ceramic Tile Like A Professional</h1>Author: <a title="Lionel Astner" href="http://www.articlesbase.com/authors/lionel-astner/131304.htm">Lionel Astner</a> Many people enjoy doing their own home improvement projects. The popularity of "do-it-yourself" TV programs will attest to that fact. Some projects are relatively simple to do, even for the inexperienced. In this article, we'll use laying a ceramic tile floor as an example. Ceramic tile floors are durable as well as attractive and add value to your home. Tile floors are especially suitable for kitchens, baths, and entryways as they are easy to clean. The first step in beginning your ceramic tile project is to select your tile. Deciding which tile you like best will probably be the most difficult part of the project. Other materials you will need are tile adhesive, grout, tile spacers, and preparation products if needed. Talk to the sales associate at the store where you purchase your tile. He will be a good source of information on how to lay ceramic tile. Next, gather all tools needed before you start. The project will go faster and smoother if you have all your tools at hand. Some tools you will need are a clean bucket and sponge, pencil, tape measure, steel rule, level, adhesive spreader, and tile cutter. One important lesson on how to lay ceramic tile is proper surface preparation. The finished surface of your ceramic tile floor will only look as good as the surface underneath it. After taking up the existing tile, make certain all the old adhesive has been removed and any damage to the surface is repaired. If you are laying new tile over existing tile be sure the old surface is clean. Before laying the new tile level the floor. Next you have to find your starting point. With a chalk line, mark a line perpendicular to the entrance of the room. Starting from the entrance, lay a row of tile without adhesive along the chalk line. Be sure to use spacers to maintain a uniform distance between the tiles. Continue to the other side of the room until there is not enough space for a full tile. Lay a long, one inch thick board perpendicular to the row of tiles and then lay tiles next to the board in both directions across the room. Measure the space left along the edges of the room and decide how far to move the rows so the borders on both sides of the room are equal. Using this measurement, snap another chalk line. The starting point will be the intersection of the second line and the board. Now you are ready to lay the tile. From the starting corner work in areas two foot square. Spread adhesive on the surface. Work the tile into the adhesive and place spacers between them to keep the tiles evenly spaced. As the tile is laid place a level on it. If the tile faces are not flush, use a rubber mallet to gently tap them into place. Continue in this manner back and forth across the room. When all the full tiles have been laid let the adhesive dry overnight. The next day you will be able to carefully walk on the tile to cut and lay the borders. To measure the border lay a loose tile over the last full tile. Put the half-inch spacer against the wall. Lay another full tile against the spacer and even with the edges of the first tile. Mark a line across the first tile and this is your cutting line. The easiest way to cut tile is with a tile cutter. If you do not have one a glasscutter will also work. When using a glasscutter, put a straight edge on the tile and score it once with the glasscutter. Then lay the tile on the edge of a table or workbench and snap it off. For more difficult cuts you may need to use a tile saw or tile nippers. After the tiles are laid and the adhesive has set it is time to move on to grouting. Grout is the material that fills in the spaces between the tiles. Mix the grout and use a rubber float to apply it; working at a forty-five degree angle. Make certain the grout gets into all the spaces. Use a sponge to wipe off the excess grout from the tile, but be careful not to dig it out of the spaces as you wipe. After the grout has set you can clean off any remaining residue. You should mop the floor everyday for the first three days to help the grout cure to a solid, durable surface. After the grout has cured for a week brush on a silicone sealer. You are now ready to enjoy your new ceramic tile floor and the feeling of satisfaction that comes from doing it yourself. If you want to lay ceramic tile yourself and do a perfect job (or even become a professional tile setter), don't get to work before you read this page. <a href="http://how-to-lay-ceramic-tile-easily.blogspot.com/"><a target="_blank" href="http://how-to-lay-ceramic-tile-easily.blogspot.com">http://how-to-lay-ceramic-tile-easily.blogspot.com</a></a>About the Author: Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/diy-articles/how-to-lay-ceramic-tile-like-a-professional-818629.html" title="How To Lay Ceramic Tile Like A Professional">How To Lay Ceramic Tile Like A Professional</a>

Many people enjoy doing their own home improvement projects. The popularity of "do-it-yourself" TV programs will attest to that fact. Some projects are relatively simple to do, even for the inexperienced. In this article, we'll use laying a ceramic tile floor as an example.

Ceramic tile floors are durable as well as attractive and add value to your home. Tile floors are especially suitable for kitchens, baths, and entryways as they are easy to clean.

The first step in beginning your ceramic tile project is to select your tile. Deciding which tile you like best will probably be the most difficult part of the project. Other materials you will need are tile adhesive, grout, tile spacers, and preparation products if needed. Talk to the sales associate at the store where you purchase your tile. He will be a good source of information on how to lay ceramic tile.

Next, gather all tools needed before you start. The project will go faster and smoother if you have all your tools at hand. Some tools you will need are a clean bucket and sponge, pencil, tape measure, steel rule, level, adhesive spreader, and tile cutter.

One important lesson on how to lay ceramic tile is proper surface preparation. The finished surface of your ceramic tile floor will only look as good as the surface underneath it. After taking up the existing tile, make certain all the old adhesive has been removed and any damage to the surface is repaired. If you are laying new tile over existing tile be sure the old surface is clean. Before laying the new tile level the floor.

Next you have to find your starting point. With a chalk line, mark a line perpendicular to the entrance of the room. Starting from the entrance, lay a row of tile without adhesive along the chalk line. Be sure to use spacers to maintain a uniform distance between the tiles. Continue to the other side of the room until there is not enough space for a full tile. Lay a long, one inch thick board perpendicular to the row of tiles and then lay tiles next to the board in both directions across the room. Measure the space left along the edges of the room and decide how far to move the rows so the borders on both sides of the room are equal. Using this measurement, snap another chalk line. The starting point will be the intersection of the second line and the board.

Now you are ready to lay the tile. From the starting corner work in areas two foot square. Spread adhesive on the surface. Work the tile into the adhesive and place spacers between them to keep the tiles evenly spaced. As the tile is laid place a level on it. If the tile faces are not flush, use a rubber mallet to gently tap them into place. Continue in this manner back and forth across the room. When all the full tiles have been laid let the adhesive dry overnight. The next day you will be able to carefully walk on the tile to cut and lay the borders.

To measure the border lay a loose tile over the last full tile. Put the half-inch spacer against the wall. Lay another full tile against the spacer and even with the edges of the first tile. Mark a line across the first tile and this is your cutting line.

The easiest way to cut tile is with a tile cutter. If you do not have one a glasscutter will also work. When using a glasscutter, put a straight edge on the tile and score it once with the glasscutter. Then lay the tile on the edge of a table or workbench and snap it off. For more difficult cuts you may need to use a tile saw or tile nippers.

After the tiles are laid and the adhesive has set it is time to move on to grouting. Grout is the material that fills in the spaces between the tiles. Mix the grout and use a rubber float to apply it; working at a forty-five degree angle. Make certain the grout gets into all the spaces. Use a sponge to wipe off the excess grout from the tile, but be careful not to dig it out of the spaces as you wipe. After the grout has set you can clean off any remaining residue. You should mop the floor everyday for the first three days to help the grout cure to a solid, durable surface. After the grout has cured for a week brush on a silicone sealer.

You are now ready to enjoy your new ceramic tile floor and the feeling of satisfaction that comes from doing it yourself.

If you want to lay ceramic tile yourself and do a perfect job (or even become a professional tile setter), don't get to work before you read this page.

http://how-to-lay-ceramic-tile-easily.blogspot.com

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/diy-articles/how-to-lay-ceramic-tile-like-a-professional-818629.html

Article Tags: How To Lay Ceramic Tile, Lay Ceramic Tile

Related Videos
Related Articles
Ask / Related Q&A

Play

How to Choose Ceramic Tile

Play

How to Lay Tile in the Bathroom

Play

How to Lay Tile Flooring

Play

How to Extend a Tile Floor

Play

How to Lay a New Floor With Congoleum Vinyl

Latest DIY Articles
More from Lionel Astner

How To Build Shed Foundations – What You Need To Know

By: John Herberte | 22/12/2009
Your shed will only be as good as the foundations. Planning at this stage will ensure it's done right and your efforts will last for a very long time. In this article I will discuss a range of shed foundations that are commonly used. 1. The Dirt Floor If your building a pole shed structure then a dirt floor is suitable. It is important though that water drains away from your shed as you don't want your stored goods getting damp from pooling of water on the shed floor 2. Blocks and Gravel

Do I Need A Plan For Building A Shed?

By: John Herberte | 22/12/2009
Every one needs a shed for storing away those tools, mowers, ladders, painting equipment, ect that we don't want to clutter our house up with. And with the possibility of thieves scouring our neighborhood looking for easy pickings it's important to have somewhere to lock away our valuable equipment that's going to give us peace of mind when we're not at home. If you want to build one yourself you need a plan for building a shed. I have built quite a few sheds myself

What's the best way to build a shed roof?

By: John Herberte | 22/12/2009
Are you thinking of building your own shed roof? You may well have decided to take it on because you have been floored by the exorbitant prices of for kit sheds or to have one built for you. Probably the most daunting aspect of building your shed will be pitching the roof. First let's look at different ways you could build a shed roof. There are different styles of roof you can have. The simplest would be a skillion or flat roof with a slight gradient for water run off.

Can I save Money Using Garage Building Plans?

By: John Herberte | 22/12/2009
Many people wouldn't consider building their own garage but if you are, would you really save much? Well the answer is yes but whether you build it yourself or hire the job out to a local contractor you need to get a reliable set of garage building plans first. Let's look at 3 ways you could save. 1. Having the plans means that if you have reasonable basic skills you could build the garage yourself, saving heaps on labor.

Power4Home Review - DIY Homemade Solar Power

By: Drota Kalis | 22/12/2009
We know what you are worried about right now. The increase of energy costs, the more and more expensive electric bills every month, the more serious pollution problems. All of them affect not only us but also our off springs. To avoid making them hate us, we have to do something. And the first thing for all homeowners should be to have a solar power system for home.

Magniwork Generator

By: Kevin Gianni | 22/12/2009
magniwork generator

Solar Panel Kits Can Save You Money

By: Drota Kalis | 22/12/2009
Environmentalists have long called for the shift to solar energy as a renewable energy source that could reduce the country's dependence on fossil fuels which have contributed to global warming. Solar energy is one of the most readily available sources of renewable energy on earth, and yet only a small fraction of it is used, mainly due to the expense of installing photovoltaic cells that turn sunlight into energy.

Build Solar Panels - How To Generate Home Power

By: Drota Kalis | 22/12/2009
With the economic downturn this is the best time to do a DIY solar power project. A couple of decade's back it was impossible to think of such a project due to high cost of solar electricity components, availability of cheap grid based power, low cost of fossil fuels etc. However in the last few years the cost of crude oil has increased dramatically and cost of power generation using fossil fuels has gone up considerably.

Science Diet Dog Food – How To Prepare Natural Food For Your Dog

By: Lionel Astner | 05/06/2009 | Pets
Have you’ve ever seen the food they expect us to feed our dogs? Would you eat it? It doesn’t come close to resembling any of the chicken or beef meals I ever had. Most dog owners will read the label, but still don’t understand what ingredients are in the can. So we’re left to believe what’s written on the label. After some brands of dog food came up tainted, I decide it was time to do a little research. I become the science diet dog food guru and my poor dog became the tester.