Wood Gates - How to Stain Like the Pros

<h1>Wood Gates - How to Stain Like the Pros</h1>Author: <a title="Dan Raymond" href="http://www.articlesbase.com/authors/dan-raymond/75755.htm">Dan Raymond</a> If you do a good staining job on your wood gate, it will go well with old-fashioned to eclectic and modern styles. If the owner of a wooden gate chooses to stain there are many choices to choose from such as oil-based, water-based, gel, and one step stain/finishes. Regardless of which type of stain used, the gate must be sanded smoothly with no raised or rough spots, otherwise the stain will not be even. Always consider your choices carefully before staining a wooden gate. Each type has its own strengths and weaknesses and a decision must be made concerning which finish best suits the needs of the owner. The easiest type to use is the one step stain as the stain and finish are applied simultaneously therefore eliminating multiple steps. However, a one step finish often covers the grain of the wood as it sits on top of the wood itself. An oil-based stain penetrates the wood but solvents are used for cleanup. Gel stains are also usually oil-based and have great color control but these stains are more expensive and buffing must be done between coats. A water-based stain tends to be more environmentally friendly than the others as cleanup is by soap and water, but has a tendency to raise the grain of the wood. This can be prevented, though, by conditioning the wood to accept water-based stain before applying. Each type of stain requires careful following of manufacturer's instructions. When applying anything other than the one-step stains, several layers of stain must be applied to obtain the necessary color. These are applied by rag or paint brush and given a minimum of 15 minutes between coats to allow for penetration. Once the preferred stain color is reached, a wait time of approximately 10 hours is needed before use. If a topcoat of polyurethane is desired for further weather resistance, a minimum of 72 hours is required for the stain to dry before application.About the Author: Learn more about custom wood gates, fence gates, driveway gates, and other <a href="http://www.gardenwoodgates.com/selecting-your-wood-gate-finish/">wood gate</a> maintenance tips at <a href="http://www.gardenwoodgates.com"><a target="_blank" href="http://www.gardenwoodgates.com">http://www.gardenwoodgates.com</a></a> - a favorite site for people who need custom wood gates and custom fence gates in the Southern California area.Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/diy-articles/wood-gates-how-to-stain-like-the-pros-604889.html" title="Wood Gates - How to Stain Like the Pros">Wood Gates - How to Stain Like the Pros</a>

If you do a good staining job on your wood gate, it will go well with old-fashioned to eclectic and modern styles. If the owner of a wooden gate chooses to stain there are many choices to choose from such as oil-based, water-based, gel, and one step stain/finishes. Regardless of which type of stain used, the gate must be sanded smoothly with no raised or rough spots, otherwise the stain will not be even. Always consider your choices carefully before staining a wooden gate.

Each type has its own strengths and weaknesses and a decision must be made concerning which finish best suits the needs of the owner. The easiest type to use is the one step stain as the stain and finish are applied simultaneously therefore eliminating multiple steps. However, a one step finish often covers the grain of the wood as it sits on top of the wood itself. An oil-based stain penetrates the wood but solvents are used for cleanup.

Gel stains are also usually oil-based and have great color control but these stains are more expensive and buffing must be done between coats. A water-based stain tends to be more environmentally friendly than the others as cleanup is by soap and water, but has a tendency to raise the grain of the wood. This can be prevented, though, by conditioning the wood to accept water-based stain before applying. Each type of stain requires careful following of manufacturer's instructions.

When applying anything other than the one-step stains, several layers of stain must be applied to obtain the necessary color. These are applied by rag or paint brush and given a minimum of 15 minutes between coats to allow for penetration. Once the preferred stain color is reached, a wait time of approximately 10 hours is needed before use. If a topcoat of polyurethane is desired for further weather resistance, a minimum of 72 hours is required for the stain to dry before application.

Learn more about custom wood gates, fence gates, driveway gates, and other wood gate maintenance tips at http://www.gardenwoodgates.com - a favorite site for people who need custom wood gates and custom fence gates in the Southern California area.

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/diy-articles/wood-gates-how-to-stain-like-the-pros-604889.html

Related Videos
Related Articles
Ask / Related Q&A

Play

How to Apply a Gel Stain Finish to Wood

Play

How to Stain Wood

Play

How to Stain Wood

Play

How to Use Wood Putty

Play

How to Use Wood Conditioner

Latest DIY Articles
More from Dan Raymond

Renewable Solar Power-Learn How To Generate Renewable Solar Power

By: N Jamal | 08/12/2009
The best thing about solar power is that it has an unlimited potential. Learn how to generate extremely renewable solar power, easily and save $1000’s on utility bills. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to build your solar power.

Solar Power Energy Systems-Learn How To Build Solar Power Energy Systems

By: N Jamal | 08/12/2009
The best thing about solar power is that it has an unlimited potential. Learn how to build solar power energy system, easily and save $1000’s on utility bills forever. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to generate solar power energy.

Solar Powered Energy-Learn How To Generate Solar Powered Energy

By: N Jamal | 08/12/2009
The best thing about solar power is that it has an unlimited potential. Learn how to generate solar powered energy, easily and save $1000’s on utility bills. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to generate solar energy.

Solar Power Energy-Learn How To Generate Solar Power Energy

By: N Jamal | 08/12/2009
The best thing about solar power is that it has an unlimited potential. Learn how to generate solar power energy, easily and save $1000’s on utility bills. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to build your own solar panel for electricity.

Solar Renewable Energy-Learn How To Generate Solar Renewable Energy

By: N Jamal | 08/12/2009
The best thing about solar power is that it has an unlimited potential. Learn how to generate solar renewable energy, easily and save $1000’s on utility bills forever. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to build your own solar panel for electricity.

Make A Cheap Solar Panel-Learn How To Make A Cheap Solar Panel

By: N Jamal | 08/12/2009
The greatest thing about solar power is that its potential is virtually unlimited. Contrary to the popular belief learning how to make a cheap solar panel is easy. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to build solar panels.

Make Cheap Solar Panel-Learn How To Make Cheap Solar Panel

By: N Jamal | 08/12/2009
The greatest thing about solar power is that its potential is virtually unlimited. Contrary to the popular belief learning how to make cheap solar panel is easy. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to make solar panels.

Make Cheap Solar Panels-Learn How to Make Cheap Solar Panels

By: N Jamal | 08/12/2009
The greatest thing about solar power is that its potential is virtually unlimited. Contrary to the popular belief learning how to make cheap solar panels is easy. You just need to know how to make your own renewable energy source and today I am going to tell you exactly how to build solar panels.

Is Spinal Stenosis the Source of Your Sciatica Pain?

By: Dan Raymond | 21/10/2008 | Diseases & Conditions
If you are suffering from back pain, pinched nerve pain, or a weakness in the legs and you happen to be over the age of 50, then there is a possibility that you have spinal stenosis. Spinal stenosis is a narrowing of the spinal canal which can cause a variety of back, leg, and neck pain. While some people may be born with spinal stenosis, it is often a result of the wear and tear on the spine due to aging and normal activities.

Can Epidural Steroid Injections Help My Lower Back Pain?

By: Dan Raymond | 21/10/2008 | Diseases & Conditions
Epidural steroid injections can be used for providing temporary relief from back pain and nerve pain, especially those associated with nerve root compression. The steroid injections deliver a strong localized anti-inflammatory to the epidural space that is near the problematic nerve roots. The steroid injections are viewed only as providing temporary relief and their prolong used is typically not recommended due to side effects such as loss of bone density and muscle weakness.

How to Paint Your Wood Gate or Fence Gate Like a Professional

By: Dan Raymond | 16/10/2008 | DIY
Painting a wooden gate can be quite the challenging project if you have never done it before, or it can be a lot more satisfying and successful if you follow these simple and basic rules for wood gate painting.

Wood Gates - How to Stain Like the Pros

By: Dan Raymond | 15/10/2008 | DIY
Wood gate staining, when done properly, can bring out a whole new dimension to the look and feel of your wooden gate. There are several steps that you need to follow in order to achieve that professional quality look. The good news is that the steps are easy enough for most do-it-yourself types and weekend home improvement jockeys who aren't afraid of a little wood sanding and staining.

Back Pain Treatment and Spinal Fusion - the Final Option for Back Pain Relief?

By: Dan Raymond | 06/10/2008 | Diseases & Conditions
Spinal fusion is a surgically invasive treatment for some back pain sufferers. In spinal fusion, two or more vertebrae are welded together to create a single segment that restricts movement for that area of the spine. For some individuals, this is the final medical option for relieving back pain that is caused by the movement of those particular vertebrae. For others, DRX9000 spinal decompression is a viable, non-invasive option.

A Custom Wood Gate -- Six Ways to Inspire Great Things for Your Home

By: Dan Raymond | 06/10/2008 | Landscaping
A custom wood gate can be an extremely essential part of your home's architectual appeal. In addition to providing important aestethic design value, a well-designed custom wood gate can offer a great deal of inspiration and mental relaxation for the home owner.

Orange County Limo Rentals - Three Ways to Stretch Your Dollars and Your Limo in the Oc

By: Dan Raymond | 16/09/2008 | Rentals
Cheap Orange County limousine rentals certainly sounds like an impossible find, especially with the soaring price of gas as well as the high cost of living in Orange County California. However, the name of the game is affordabilty and especially getting good value and with these Orange County limo rental tips you'll be able to safeguard as well as maximize your rental dollars.