Selecting the Programmer Operating Mode of Logicmaster PLC
Both the programmer and the configuration software operate in three modes: OFFLINE, MONITOR, and ONLINE. In OFFLINE mode, no data transfer takes place between the computer and the PLC. Programs and configuration data may conveniently be developed in OFFLINE mode, with or without the computer connected to a PLC. In MONITOR mode, if communications have been established between the computer and the PLC, the computer can read data from the PLC but may not transfer data to it. With communications established in ONLINE mode, programs and other data can be transferred between the PLC and the computer. If you are using a Workmaster or CIMSTAR I industrial computer, you may configure the Logicmaster 90-70 software to use the keyswitch to select the operating mode. For those computers without a keyswitch, or if the keyswitch is not enabled, mode selection can be made by:
• Pressing the ALT and M keys simultaneously; i.e., press the ALT key and hold it down, then press the M key. Repeatedly pressing ALT-M switches the operating mode from OFFLINE to MONITOR to ONLINE and then back to OFFLINE. _ Going to the Programmer Setup screen (Shift-F7) and selecting an operating mode. For more information on using the Programmer Setup screen to select the operating mode.
System Security
Security for configuration and program functions consists of:
• A range of four privilege levels for the PLC, which may be protected using passwords.
• A software lock that can be applied to individual program folders.
• A software lock that can be applied to individual program blocks.
• An OEM key.
Password PLC are a configurable feature of the Series 90-70 PLC. Their purpose is to provide different levels of access privilege for the PLC when the programmer is in ONLINE mode. Passwords may not be set, or the password access (privilege) level may not be changed, when the programmer is in OFFLINE mode. The use of passwords is optional and may be set up using the status functions in the configurator. Passwords may be used to restrict changing I/O and PLC configuration data, changing programs, and clearing faults.
Program folders can be protected to prevent accidental changes to program and configuration information. Each program folder can be either "locked" or "unlocked". After a folder is locked, its contents cannot be changed or deleted. For more information on locking program folders.
Setting up PLC Communications using a WSI Board
For the WSI version of Logicmaster 90-70 software, the serial port on the Work Station Interface (WSI) Board in the programmer provides serial communication between the programmer and the attached PLC. The COMSET serial port setup function is used to configure the WSI serial port, and to save or recall those configurations from disk files. "WSI Serial Port," for instructions on WSI serial port setup. The parallel port on the WSI Board requires no port setup; however, you must select PARALLEL as the port connection.
Setting up PLC Serial Communications
For the standard serial communications version of Logicmaster 90-70 software, the COM1 or COM2 serial port may be set up to provide serial communications between the programmer and the attached PLC. The COMSET serial port setup is used to configure the COM1 or COM2 serial port, and to save or recall those configurations from disk files.
Program Folders
Each program and the corresponding configuration is assigned to a subdirectory called a program folder. Both the configuration software and the programming software use a set of program utility functions to create and maintain program folders. "Program Folders," explains how to use the program folder functions to:
• Select another program folder.
• Create a new program folder.
• Delete an unneeded program folder.
• Rename a program folder.
• Make a backup copy of the current program folder.
• Restore a program folder with its backup copy.
• Clear the contents (entire or selective) of the current program folder.
• Lock/unlock a program folder.
• Copy the contents (entire or selective) of one program folder into the current program folder.
Questions and Answers
Recently, a large widespread cloud technology. These technologies have reached and simple devices, such as a calculator.
Android is making the expertise deployment of the mobiles and iPads by its high response touch applications and the affordable variety of...
For a sports enthusiastic or sports photo journalist, the highest concern is acquiring the best and fastest ever sports camera that will permit the photographer capture not just the battle in the field, but the high adrenaline rush and the fierce ambience of that very minute.
It is truly remarkable, the way technology continues to be improved. You can find millions of people that love to read and the cutting edge Kindle makes it easier and much more enjoyable. A popular and handy way to read is by using e-readers. With so many things transitioning to computers as well as digital information, I am sure you had seen this coming. Years ago with the arrival of the first Kindle, individuals received it exceptionally well.
Your need, related to security system, can be fulfilled in the best way, with Security Cameras Systems. Security Camera Systems is a system that ensures your house with the assistance of security cameras.
Building on its precursor, the AnSH SystemQ is a concept control that lets users to combine and choose the best CPUs combination, devices of communication, specialist modules of control and cautious I/O on a back-plane. This enables users to organize systems into what they require, when they want it, where they require it.
A lot of parameters must be taken into contemplation. The most significant ones are: the inputs/outputs number, the memory of program and the sizes of data memory, the communication ports number, and the instructions number.
The fault-tree analysis objective of IEC, 90, is to decide all the suspected causes of a reflected on fault, defined as undesirable event. To achieve this goal, fault-tree analysis seems for how elementary faults combinations can guide to this error
When using the output of middle, be conscious that when incorporating with other logic, if the pace pointer is zero and the input of middle is ON, after that the output of middle will also be ON. This situation will cause the pace pointer to be one step out of series.
One of the key advantages of Windows PC-based control software is the removal of the multiple databases needed to support a PLC system. Because the software integrates the functions of the PLC, the operator interface, the programming PC, and offers real-time data access to other applications of software running in Windows, a single, common database can be applied across all of the tools.
Discuss this Article
