Some Easy Ways to Test Electronic Components With a Multimeter
For those who want to know whether their electronic components or circuits work, it can be easily tested at home with multimeter. Basically, there are three primary electronic components that are used in the circuits. The capacitor can store energy in the electrical field, the inductor can store energy in the magnetic field, and the resistor can increase the potential difference between two points. At this time, this article is going to give you some easy tips to test electronic components with a multimeter. So, just take a look at the tips below.
Firstly, you need to test the resistor by turning the multimeter switch to the resistor setting. It is indicated by the omega symbol. After that, you should place the dial to the lowest setting above the component resistance. You can check it by reading the color bands. If you find that the component is unlabeled, then you have to set the dial to the lowest setting.
Secondly, you need to place one probe on the each side of the resistor. It is usually on the extended lead. If you find that the measurement is not conclusive, you should adjust the dial up or down the magnitude as needed. It is known that resistor is an electronic component which resists the flow of the electric current for increasing the voltage. It is used for controlling the voltage or current. The capacitor can hold the energy in the electric field and it is often used for storing the charge for later, or for controlling current.
Thirdly, you need to test the inductor by turning the multimeter switch to the inductor setting. It is usually indicated by the letter H. In this step, you should place the dial to the lowest setting above the component inductance. If it is found that the component is unlabeled, you need to adjust the dial up or down the magnitude as needed. The inductors are storing energy in the magnetic field which is generated by the electric current passing through coils of wire. They can be used for simply storing energy or controlling the electric current.
Questions and Answers
Article Tags:
lowest setting
,electric current
,storing energy
,electronic components
,resistor setting
This article gives the information about the main protective components like CB,Relays which are present in the substation.
Recently, a large widespread cloud technology. These technologies have reached and simple devices, such as a calculator.
Android is making the expertise deployment of the mobiles and iPads by its high response touch applications and the affordable variety of...
For a sports enthusiastic or sports photo journalist, the highest concern is acquiring the best and fastest ever sports camera that will permit the photographer capture not just the battle in the field, but the high adrenaline rush and the fierce ambience of that very minute.
It is truly remarkable, the way technology continues to be improved. You can find millions of people that love to read and the cutting edge Kindle makes it easier and much more enjoyable. A popular and handy way to read is by using e-readers. With so many things transitioning to computers as well as digital information, I am sure you had seen this coming. Years ago with the arrival of the first Kindle, individuals received it exceptionally well.
Your need, related to security system, can be fulfilled in the best way, with Security Cameras Systems. Security Camera Systems is a system that ensures your house with the assistance of security cameras.
Computer has battery or a special chip which retains computer (CMOS) settings and also runs the computer lock even after the computer itself is turned off. When you have to reset the date and the time on the computer every time you start it, you will need to replace the battery of your computer. This procedure is applied to IBM-compatible computers which have a replaceable battery or the connector for the space battery.
A car which will not start commonly points to one thing that is a dead battery. It is known that the battery can have a few things wrong with it which will not allow it for keeping a charge that includes dead battery, bad electrical connection, or low water in battery cells. Actually, it ca be very easy to charge the dead battery with another car and also the jumper cables or by using 12-volt DC battery charger. So, just follow the tips below to easily fix a car battery.
When you find that your battery is dead, it can be a big hassle. Even it can also lead to spend money on the tow or the jump and the new battery on top of that. At this time, this article is going to deliver several tips that will help you to save money on charging the battery of your car instead of paying the power for the costly tow and the roadside service. So, just take a look at the following tips.
Clamp meter is known as a device which is used for measuring the current in the power line without the need to break the circuit. This device does so by taking the measurement of magnetic field that induced around the conducting wire. Since the circuit does not need to be broken, the clamp meter is not only safer than the standard mutimeter but it also can allow much quicker testing.
When you think that the battery of your car might be low, you can use multimeter for seeing if it is really low. Basically, making test on your car battery using multimeter is quite easy if you know the settings to use and where you should connect the leads. At this time, this article is going to give you some easy steps to test the battery of your car by using multimeter. So, just take a look at the explanation below.
