Some Tips to Connect the Leads in Digital Multimeters
The digital multimeter is known as a highly accurate device for making voltage, resistance, and the amperage measurements when you make a test on the electronic circuits. This multimeter consists of the rotating selector switch, LCD digital readout screen and also three sockets on the front in which for connecting the wired test leads into the device. The test lead plugs should be placed into the proper sockets for general use. At this time, this article is going to give you several tips that will guide you to connect the leads in digital multimeters. So, just take a look at the tips below.
The first thing that you have to do is to turn the dial of the multimeter so that its yellow or white indicator mark is pointing to the "OFF" position of the meter.
The second thing that you have to do is to install the leads. If you want to make measurements for the resistance, the voltage, or the amperage that below 10 amps, you have to connect the elbow-shaped ends of red and black lead. What you have to do us just press them into the sockets until they are firmly snapped into the sockets. It is important for you to know that the red lead in the socket is labeled "V ma", while the black lead in the socket is labeled "COMM" (stands for COMMON or GROUND). If you want to measure the amperage of 10 amps or higher, you should keep the black lead plugged into the "COMM" but make sure that you snap the plug of the red lead into the socket that labeled "10A".
The third thing is to check for ensuring that the leads are plugged completely into the multimeter by turning the selector of multimeter from the "OFF" position to the "OHMS" position and then touch the pointed metal tips of the black and red leads together. If you find that the digital display shows the reading of "0.000" when touching leads together, the leads installation is successful. On the other hand, if you find that the display shows the reading of "1 -" when touching the tips together, you should follow all of the tree steps once again, as it means that the leads are not snapped completely into the sockets.
Questions and Answers
Article Tags:
digital multimeters
,digital readout screen
,digital readout
,lcd digital readout
,wired test leads
Recently, a large widespread cloud technology. These technologies have reached and simple devices, such as a calculator.
Android is making the expertise deployment of the mobiles and iPads by its high response touch applications and the affordable variety of...
For a sports enthusiastic or sports photo journalist, the highest concern is acquiring the best and fastest ever sports camera that will permit the photographer capture not just the battle in the field, but the high adrenaline rush and the fierce ambience of that very minute.
It is truly remarkable, the way technology continues to be improved. You can find millions of people that love to read and the cutting edge Kindle makes it easier and much more enjoyable. A popular and handy way to read is by using e-readers. With so many things transitioning to computers as well as digital information, I am sure you had seen this coming. Years ago with the arrival of the first Kindle, individuals received it exceptionally well.
Your need, related to security system, can be fulfilled in the best way, with Security Cameras Systems. Security Camera Systems is a system that ensures your house with the assistance of security cameras.
Computer has battery or a special chip which retains computer (CMOS) settings and also runs the computer lock even after the computer itself is turned off. When you have to reset the date and the time on the computer every time you start it, you will need to replace the battery of your computer. This procedure is applied to IBM-compatible computers which have a replaceable battery or the connector for the space battery.
A car which will not start commonly points to one thing that is a dead battery. It is known that the battery can have a few things wrong with it which will not allow it for keeping a charge that includes dead battery, bad electrical connection, or low water in battery cells. Actually, it ca be very easy to charge the dead battery with another car and also the jumper cables or by using 12-volt DC battery charger. So, just follow the tips below to easily fix a car battery.
When you find that your battery is dead, it can be a big hassle. Even it can also lead to spend money on the tow or the jump and the new battery on top of that. At this time, this article is going to deliver several tips that will help you to save money on charging the battery of your car instead of paying the power for the costly tow and the roadside service. So, just take a look at the following tips.
Clamp meter is known as a device which is used for measuring the current in the power line without the need to break the circuit. This device does so by taking the measurement of magnetic field that induced around the conducting wire. Since the circuit does not need to be broken, the clamp meter is not only safer than the standard mutimeter but it also can allow much quicker testing.
When you think that the battery of your car might be low, you can use multimeter for seeing if it is really low. Basically, making test on your car battery using multimeter is quite easy if you know the settings to use and where you should connect the leads. At this time, this article is going to give you some easy steps to test the battery of your car by using multimeter. So, just take a look at the explanation below.
