What is Unfinished Furniture?

Education Resource for Commuters: Unfinished furniture is the name i.e. implied to those furniture items or products that are not yet been provided a finished touch with absolute handcraft or machinery finishing thereupon by a carpenter. The frequently asked questions for unfinished furniture items is a tiresome answering method for those manufacturers and dealers who deal in certain unfinished furniture to safeguard their finishing aspect sooner or later. For ex: Does the wooden cabinet have proper knobs to drag the shelf conveniently? The discoloration of the furniture product and other defects of a kind etc. The unfinished furniture cannot be compared with the finished product as it’s in its final touch or refining process to come up with absolute final furniture product. A high-grade lumber is utilized before the final finished furniture is launched in the market. If one can give finishing to unfinished furniture item himself can save extra amount over the finished product. The selection of colorful pains and stains are easily accessible and are limitless in nature therefore theirs is a freedom of choosing your own piece of furniture directly demanded from a local hardware store or carpenter’s shop. The unfinished furniture is rather purchased to match with existing decorative items of the house such as: carpets or rugs; draperies and other related furnishings of the house.

When buying unfinished furniture from the market there might occurs certain contingencies of blistering up of item or peeling off or the spraying process that must have missed spray spots or been applied unevenly to certain section or all over the corners and edges of the furniture product. Beware of such contingencies and spray of your own evenly and thoroughly with detailed outlook towards the finishing touch to the furniture. There is a great sense of accomplishment and satisfaction that comes with finishing your own furniture. Certain creative ideas can be implied from simple staining and varnishing finishing to an elaborative tole-painted or stenciled finish to the furniture if asked upon by any visitor at home.

Wooden Finishing ways for Unfinished Furniture:

· To apply Oil based/Gel Oil based Finishing: The Oil based products are made up of urethane resins and have thinner viscosity to be applied very easily. Liquid based oil penetrated deeply into the wood than with gel based substances or water based products. The grain is variant with rich dark and light tones. For the removal of stains from the surface, liquid oil base can be applied rapidly then gel based form. The porous wood has the tendency to absorb stain unevenly. A pre-stained wood conditioner is used to help prevent streaking and blotching. The importance of gel based top coats product is that the application of gel stain responds with a high luster and it’s thick in nature that doesn’t dip, splash or run away from the wooden board. Gel is meant mainly for rubbing and polishing purposes. Water based top coats dries to a spik and span finish. Try to use mineral spirit or paint thinner to clean up.

· Spray Finishing: All surfaces of furniture should be absolutely free from oil and dirt. Avoid the use of sandpaper for sanding the surface on unfinished wood. Rubbing down the surface with a damp cloth or applying the water is recommended before applying the finish with a spray. The water based top coats are ready always to be sprayed from the containers. In this process thinning isn’t necessary. There must be rough and dry surface for spraying the furniture board. Try to apply spraying at a temperature 65 degree Fahrenheit because orange peels or dimples can occur at a very cool temperature especially due to using coolers to cool the surface. Blush the surface for any milky appearance in the finish due to excessive humidity.

· Apply Water based finishing

· Use Foam brushes to gently brush away the foreign particles from the surface of a wooden furniture item.