Optimized Data Recording With Sony Ait-5 Tape Technology

Native transfer speed & the native recording ability of the efficient Sony AIT-5 data tape format are 24 MB/s and 400 GB respectively. Sony AIT5 half height 3.5 inch form factor uses the SCSI ultra-160 LVD/SE interface. AIT-5 technology protects the investment as it is capable of reading & writing the tape media of AIT-4, AIT3 and AIT-3Ex. Sony AIT5 tape products are very proficient and consume less energy.  Before launching the Sony AIT products into the market, they are rigorously and carefully tested to check their durability and performance.  

AIT-5 is one of the first tape media in 8mm tape format with recording space of 400GB. AIT-5 format has flux sensing magneto resistive heads that provide enhanced read/write sensitivity. MR heads provide compatibility to AIT-5 with AIT-3Ex, AIT3 and AIT 4 tape formats. Signal tracking mechanism of Sony AIT-5 is dynamic and is optimized to read back data. Signal tracking mechanism also minimizes the effect of distortion. Each of the four reading heads are used in dynamic tracking and position of the head is controlled by DT servo during back reading of data. Even if the track paths are narrow, tight or not straight, dynamic tracking helps the magneto resistive head in following the track paths.

MR heads in AIT5 tape technology helps it to accommodate higher densities of recording and allows greater recording capacity per tape cartridge. S/N in AIT-5 is 10 db higher in comparison to the MIG head utilized in the AIT-4 and AIT 3 backup tape technology. AME-II technology is used on AIT4 tape format while in AIT-5 tape format the advanced form of AME called AME-III technology is used. The head life is maximized and the surface area is made even smoother due to the AME-III technology. The particle size in AIT-4 tape media is about 5-7 nm. While the AME-III in Sony AIT-5 further reduces the size and the average particle size is about 3nm to 4nm.

Quality of Signal to noise ratio is improved in AIT5 as AME-III technology and the combination of MR-head lowers the noise and gives higher output. Back coating of AME-III upgrades the tape media reliability and also helps to lower the friction. Operations of Sony AIT-5 are carried out smoothly due to the AMEIII that enhances the tape life and integrity of backup data. It makes the tape media more durable and provides the desired results in heavy and severe working conditions. Frequent cleaning is not necessary in Sony AIT5 tape media. Recording technology used in AIT is helical-scan that has platform of rotating head/drum which is very stable. This technology assists in reliable and accurate storage of data and the track densities are also very high. The recording process is carried out and the tape is not constantly repositioned back & forth. 

Sony AIT 5 is the first tape technology that has introduced the new innovative MR heads. These new heads have the latest technology to support higher densities of data recording that is why the AIT-5 format is capable to storing more information on tape media cartridge. MR heads builds the platform for increased capacity and performance of read-write. When data is read, the position of MR-head is controlled automatically by the dynamic tracking process. Recorded data is tracked and adjusted automatically by the AIT5 tape head to get the maximum recovery and strength of data read back. Recording distortion’s effect is minimized and the quality of data read back is elevated by the dynamic tracking system. So in this way the recovery of data is ensured. 

For online order of AIT and other backup data tapes please visit ‘tape4backup.com’