Windows XP Registry Tips & Tricks

Introduction:

Most settings can be done easily within Windows. However, for some setting you need to dive into the registry or use one of the many registry utilities and some interesting registry tweaks which you can do yourself, using the registry editor.

NOTE: We must be careful editing the registry because worst case scenario will happen such as Windows won't boot anymore. If you are not sure, leave things unchanged! My advise: create a system image before making major changes!

Windows XP Registry Hacks

Structure of Windows XP Registry:

When you will open the Windows XP Registry , you will see it's divided into two panes. On the left side there are Five main
Keys as shown below. These can be expanded to several Sub-Keys, which further have many Sub-Keys.
+HKEY_CLASSES_ROOT
+HKEY_CURRENT_USER
+HKEY_LOCAL_MACHINE
+HKEY_USERS
+HKEY_CURRENT_CONFIG
Before you try out the Tweaks, learn how to Backup and Restore Windows XP Registry.

Types of Registry Backups :
It is very important that before you do editing you make a backup of the current registry. If you ignore this warning, it might prove deadly for you.

Open your registry. Go to Start>Run , type regedit . When you invoke the Export function from File>Export, you are given a choice of different file types that can be saved :
Registration Files (*.reg)
Registry Hive Files (*.*)
Text Files (*.txt)
All Files

Each one of the different file types above plays an important role in how the data you export is saved. Choosing the wrong type can give you unexpected results. So let me explain you quickly these file types.

Registrations Files : The Registration Files option creates a .reg file. This is the most well known file format used for backing up the registry. The Registration File can be used in two ways. As a text file it can be read and edited using Notepad outside of Registry Editor. Once the changes have been made and saved, right clicking the file and using the [Merge] command adds the changed file back into the registry. If you make additions to the registry using regedit and then merge the previously saved Registration File, anything that you've added via regedit will not be removed, but changes you make to data using regedit that previously existed in the saved Registration File will be overwritten when it is merged

Registry Hive Files : Unlike the Registration Files option above, the Registry Hive Files option creates a binary image of the selected registry key. The image file is not editable via Notepad nor can you view its contents using a text editor. However, what the Registry Hive Files format does is create an image perfect view of the selected key and allow you to import it back into the registry to insure any problematic changes you made are eliminated.

Text Files : This option does just as the name suggests. It creates a text file containing the information in the selected key. It's most useful purpose is creating a record or snapshot of a key at a particular point in time that you can refer back to if necessary. It cannot be merged back into the registry like a Registration File.

Out of the give above choices , the safest method of backing up registry is to use Registry Hive Files option. No matter what ever you do or goes wrong in editing, importing the image of the key will eliminate all changes.

Windows XP Registry Tips & Tricks

1. Customize Windows Media Player Title Bar
Change the title bar to read Windows Media Player provided by <your text>, so if I had entered text ?Abhishek Bhuyan? , it would read: Windows Media Player provided by Abhishek Bhuyan
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwarePoliciesMicrosoft
Create the Key [WindowsMediaPlayer]
Create String value named [TitleBar]
Data Type: REG_SZ // Value Name: TitleBar
Double click TitleBar and Enter the text to be displayed in the title bar.
Exit Registry / Reboot

2. Minimize Outlook 2002 to the System Tray

If you frequently access Outlook during the day it?s more convenient to have it minimized to the system tray rather than invoking it each time you need to send/receive e-mail. This tweak minimizes Outlook 2002 to the system tray:
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftOffice10.0O utlookPreferences
Modify/Create Data Type DWORD named [MinToTray]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

3. Specify Default IE Download Directory
This tweak changes the default directory where downloads initiated in Internet Explorer are stored on the system.

[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftInternet Explorer
Modify/Create String Value of Data type REG_SZ Named [Download Directory]
Value Data: [Enter Path to Directory to be Assigned as Defualt for Downloads]
Exit Registry / Reboot

4. Force Use of Classic Start Menu
This tweak loads the Classic Start Menu and makes it impossible to change back to the Windows XP version
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create the DWORD Value of Data type REG_DWORD Named [NoSimpleStartMenu]
Value Data: [0 = Default / 1 = Force Classic Start Menu]
Exit Registry / Reboot

5. Hide/Show Internet Explorer Desktop Icon
By default, Windows XP does not show the Internet Explorer icon on the Windows desktop. Using the registry tweak below allows you to control whether or not the Internet Explorer icon is displayed.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoInternetIcon]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

6. Increase Menu Display Speed
When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.
The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERControl PanelDesktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot

7. Change the Location of Special Folders
This tweak allows changing the location of special folders on the system. Any of the folders listed in the registry key may be moved.
[Start] [Run] [Regedit]
Go to : HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerUserShell Folders
Modify/Create String value of Data type REG_SZ Named [Various Folder Names]
Data Type: REG_SZ [String Value] // Value Name: Consult RegEdit for Folder Names
Value Data: [Move the folder to the new desired location using explorer, and then edit the matching folder in RegEdit to reflect the new folder location]
Exit Registry and Reboot

8. Faster Browsing in Windows Explorer on Network Computers
By default, a Windows XP machine connecting to a Windows 95/98/Me computer will search for scheduled tasks or enabled printers on the remote computer. Two sub-keys control this behavior. Deleting them will speed up browsing on the remote computer.
[Start] [Run] [Regedit]
Go to : HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurr entVersionExplorerRemoteComputerNameSpace

To Disable Scheduled Task Checking
Value Name: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Delete the sub-key in the left pane of Registry Editor

To Disable Printer Checking
Value Name: {2227A280-3AEA-1069-A2DE-08002B30309D}
Delete the sub-key in the left pane of Registry Editor

Exit Registry / Reboot

9. Add Administrator Account to Log In Screen
When Windows XP is first installed it requires you to enter at least one name of a user who will access the computer. Once you create this name the default Administrator account vanishes. To access it, press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard Windows 2000 logon dialog. Log on as Administrator from this point. To log the Administrator off, click [Start] [Log Off] and [Log Off] when the [Log Off Windows] selection box appears. The Log On screen with the available users will be displayed.

To Make the Administrator Account Always Visible on the Login Screen use this Registry Tweak.
[Start] [Run] [Regedit]
Go to: HKEY_LOCALMACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogonSpecialAccountsUserLis t
Modify/Create DWORD Value of Data type REG_DWORD Named [Administrator]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

10. Increase Internet Download Connections
Increase Simultaneous Internet Download Connections. Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionInternet Settings
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPer1_0Server]
Setting for Value Data: [0000000a]
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPerServer]
Setting for Value Data: [0000000a]
Exit Registry / Reboot

11. Connected Web Files and Folders
Connecting web files and folders allows a primary .htm or .html file to be moved in conjunction with files associated with the primary document. Once the primary document has been defined, create a sub-folder using the same name as the primary document but assign it a .files extension. Whenever the primary file is moved, the sub-folder will also move and remain as a sub-folder of the primary.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoFileFolderConnection]
Setting for Value Data: [0 = Enabled (Default) / 1 = Disabled]
Exit Registry / Reboot

12. Hide/Show My Documents Folder on Desktop
By default, Windows XP does not show the My Documents folder on the Windows desktop. Using the registry tweak below allows you to control whether or not My Documents is displayed.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerCLSID{450D8FBA-AD25-11D0-98A8-0800361B1103}ShellFolder
Modify/Create DWORD Value of Data type REG_DWORD Named [Attributes]
Setting for Value Data: [Default = 0xf0400174 / Hidden = 0xf0500174]
Exit Registry / Reboot

13. Create a Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionWinlogonSpecialAccountsUserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.

14. Create Legal Notice Logon Dialog Box
In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.
Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption]
Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]
Exit Registry / Reboot
15. Manage Internet Explorer Error Reporting
This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftInternet ExplorerMain
Note:- Create both values listed below and set according to the bold type for the tweak to function properly.
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled]
Value Data: [0 - Disabled / 1 - Enabled]
Exit Registry / Reboot

16. Customize Logon and Security Dialog Title
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

17. Customize Logon Box Message
This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]
Exit Registry / Reboot

18. Welcome Screen Logon Vs Classic Logon
This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]
Exit Registry / Reboot

19. QoS (Quality Of Service) Bandwidth Reserve Setting
By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServic esPschedParametersAdapters{Adpater-ID} rather than HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]
Exit Registry / Reboot

20. Enable/Disable Save Password in DUN
This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasManParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]
Exit Registry / Reboot

21. Change the Registered Organization/Owner of Windows XP
This tweak allows modification of the registered owner and organization of the Windows XP software.
Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion
Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]
Exit Registry / Reboot

22. Remove Links Folder in Favorites
The Links folder is part of Favorites whether it's being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerToolbar
Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]
Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.
Exit Registry / Reboot

23. Enable/Disable Active Window Tracking to Mouse Movements
When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERControl PanelMouse
Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]
Exit Registry / Reboot

24. Auto Disconnect for Internet Explorer
Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don’t like using your computer with net J
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESystemCurrentControlSetServic esLanmanServerParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry / Reboot

25. Auto Reboot on System Crash
By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lCrashControl
Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]
Exit Registry / Reboot
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[System Properties may also be opened using the WinKey+Pause key combination]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit

26. Modify Control Panel Categories
Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It's possible.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurr entVersionControl PanelExtended Properties{305CA226-D286-468e-B848-2B2E8E697B74} 2
Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]
Setting for Value Data: [Select the value from table below]
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
Exit Registry / Reboot

To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren't already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.

27. Enable/Disable Run Commands Specific to the Registry
This tweak controls the use of the Run command on the local machine
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersion PoliciesExplorer
Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.
Modify/Create the Value Name [DisableLocalMachineRun]
Modify/Create the Value Name [DisableLocalMachineRunOnce]
Modify/Create the Value Name [DisableCurrentUserRun]
Modify/Create the Value Name [DisableCurrentUserRunOnce]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

28. Enable/Disable System Properties Access from My Computer
This tweak removes access to System Properties via My Computer as well as via Control Panel.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]
Exit Registry / Reboot

29. Uninstall Programs Manually
Just because Windows XP has the Add/Remove Programs feature it doesn't mean your application will appear in the list. Furthermore, even if it does appear, it's no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.
Find the directory for the application and delete all the files in the directory. Delete the directory.
Open regedit and navigate to HKEY_LOCAL_MACHINESOFTWARE and find the folder for the application. Delete the folder.
Open regedit and navigate to HKEY_CURRENT_USERSOFTWARE and find the folder for the application. Delete the folder.
To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall and find the folder for the application. Delete the folder.
Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINESystemCurrentControlSetServices, locate and delete the service.
In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be:
C:Documents and SettingsAll UsersStart MenuPrograms and delete relevant entries.
C:Documents and SettingsAll UsersStart MenuProgramsStartup and delete relevant entries.
C:Documents and Settings%YourUserID%Start MenuPrograms and delete relevant entries.
[Do this for each User ID listed]

C:Documents and Settings%YourUserID%Start MenuProgramsStartup and delete relevant entries.
[Do this for each User ID listed]
If no entries were found in the previous step and the application launches automatically, navigate to
HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionWindows
and delete the entry.

30. Create a right-click command prompt option
You can right-click a folder to get a list of actions you can apply to it. Hare’s a way to create an action on that right-click menu that opens a command prompt window with that folder as the current directory. In a text editor such as Notepad, type the following exactly:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOTFoldershellCmd Here]
@=?Command &Prompt Here?
[HKEY_CLASSES-ROOTFoldershellCmd Herecommand]
@=?cmd.exe /k pushd %L?
Save the file with any name you want, with a .reg extension. Then double-click the saved file and choose Yes to merge the file’s information into the Registry. You can delete the file. Right-click any folder and you’ll see the Command Prompt Here option.

31. Adjusting System Restore values
The new System Restore feature in Windows XP automatically backs up a snapshot of your system, including your Registry, every 24 hours. It also saves restore points for 90 days. Neither of these values is directly editable in the System Restore program, but you can change them in the Registry. Go to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionSystemRestore
You’ll find an assortment of settings here. To change the interval between automatically created restore points, change the RPGlobalInterval setting. To change the number of days that a restore point is retained, change the RPLifeInterval setting.
System Restore time intervals are measured in seconds, not days, so you must convert the number of days you want into seconds. There are 86,400 seconds in a day, so multiply 86,400 by the number of days you want to determine the value. (There are 3,600 seconds in an hour, I hope you know)

32. Erase the swap file at shutdown
You might be concerned about someone browsing your users? swap files and gathering up little bits of their sensitive data. A remote possibility, to be sure, but it could happen. For that extra measure of security, go to:
HKEY_LOCAL_MACHINESystemCurrentControlSetContro lSession ManagerMemory Management
Set the ClearPageFileAtShutdown DWORD to 1. This will make shutdowns take longer, because it overwrites everything in the swap file with zeroes. Don’t turn this feature on unless you have a serious security threat.

33. Delete the Files Stored on This Computer category in the My Computer window
In Windows XP, the My Computer window’s listing is broken down by categories: Hard Disk Drives, Devices with Removable Storage, and so on. One of these categories is Files Stored on This Computer, which appears at the top of the My Computer window. If a user doesn’t need it, you can get rid of it. To do so, go to:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerMyComputerNameSpaceDelegate Folders
Delete the {59031a47-3f72-44a7-89c55595fe6b30ee} sub key to remove the category.

34. Change the desktop cleanup frequency
Through Display Properties (Desktop tab, Customize Desktop button, General tab), you can turn on and off a feature that runs the Desktop Cleanup Wizard every 60 days. You don?t have an option to set a different interval there, but you can change the interval in the Registry. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerDesktopCleanupWiz
Change the Days Between Clean Up Value to some other number of days (in decimal format).

35. Sort menus alphabetically
When you install a new program for a user, it doesn?t find its place in the alphabetical Start menu hierarchy right away; it hangs out at the bottom for a little while. If your users employ the Classic Start menu, they can re-alphabetize it manually by right-clicking the taskbar and choosing Properties, clicking the Customize button next to the Classic Start Menu, and clicking the Sort button. With the Windows XP style of Start menu, however, you don?t have an equivalent button. To make Windows always alphabetize the list, remove the permissions from the Registry key that controls the sort order for the Start menu. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerMenuOrder
Choose Edit | Permissions and click the Advanced button. Deselect the Inherit From Parent The Permission Entries That Apply To Child Objects check box and then click Copy when the Security dialog box pops up. Click OK and clear the Full Control entry for your account and all security groups you are a member of. Leave only Read permission.

For more information please visit<a onClick="javascript:pageTracker._trackPageview('/outgoing/article_exit_link');" href=’ http://www.actsolutions.net’> http://www.actsolutions.net</a>