How to quickly work out the head and tail wind component in your head

<h1>How to quickly work out the head and tail wind component in your head</h1>Author: <a title="Chris Puddy" href="http://www.articlesbase.com/authors/chris-puddy/288379.htm">Chris Puddy</a> An easy way to work out cross wind and head wind component is using this simple mathematical formula. For calculating cross wind. If the wind it 30 degrees off the nose it is .5 the wind strength, 45 degrees off .7 the wind strength, 60 degrees off it is .9 the wind strength, and if 90 degrees of then obviously it is full strength. This applies on cross country flights, or for working out the cross wind when coming in to land. If for example when coming in to land the wind is 60 degrees off the runway heading it is .9 times the wind strength, so using simple arithmatic on a 20 knot wind just multiply 9 by 2 which is 18 knots.   For a wind of 30 knots and 45 degrees off the runway heading the calculation is 3 X 7 which is 21 cross wind component.  If like me you learned your multipliction tables as a child, this is easy. If you reverse the formula, you can use it to work out head wind or tail wind component as well.  So if the wind is directly towards you, it is full strenght, if 30 degrees off it is .9 of full strength, 45 degrees off .7 of full strength, and 60 degrees off it will be half strength. If it is 90 degrees off then there is no head or tail wind component. However bear in mind that any strong wind will be affecting the aircraft by drifting and turning into wind will in effect mean that you have to fly a longer track than a straight line so it will slow you down a little bit. If the wind is coming from behind you, then the same proportions can be applied to work out the tail wind component, so if it is 30 degrees off your tail, it is .9 of the strength of the wind and so on. For working out a diversion, you can apply this percentage to your airspeed to get the groundspeed, and then to work out drift interpolate the following formula as well. The formula is that at 120 knots airspeed, half the cross wind component is drift. So if you are flying at 90 knots then your drift would be 25% more than half the drift.About the Author: Chris has been flying since 1965 and had had a variety of flying since then, mostly on light aircraft, and much of it single crew with no autopilot with many landings. He also has over 2500 hours instructing, and his varied experience is a huge benefit to his students. 
Chris is CFI of the <a title="Cotswold Flying School" href="http://cotswoldflyingschool.com">Cotswold Flying School</a> at Kemble in the UK.Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/hobbies-articles/how-to-quickly-work-out-the-head-and-tail-wind-component-in-your-head-1464544.html" title="How to quickly work out the head and tail wind component in your head">How to quickly work out the head and tail wind component in your head</a>

An easy way to work out cross wind and head wind component is using this simple mathematical formula.

For calculating cross wind. If the wind it 30 degrees off the nose it is .5 the wind strength, 45 degrees off .7 the wind strength, 60 degrees off it is .9 the wind strength, and if 90 degrees of then obviously it is full strength. This applies on cross country flights, or for working out the cross wind when coming in to land.

If for example when coming in to land the wind is 60 degrees off the runway heading it is .9 times the wind strength, so using simple arithmatic on a 20 knot wind just multiply 9 by 2 which is 18 knots. For a wind of 30 knots and 45 degrees off the runway heading the calculation is 3 X 7 which is 21 cross wind component. If like me you learned your multipliction tables as a child, this is easy.

If you reverse the formula, you can use it to work out head wind or tail wind component as well. So if the wind is directly towards you, it is full strenght, if 30 degrees off it is .9 of full strength, 45 degrees off .7 of full strength, and 60 degrees off it will be half strength.

If it is 90 degrees off then there is no head or tail wind component. However bear in mind that any strong wind will be affecting the aircraft by drifting and turning into wind will in effect mean that you have to fly a longer track than a straight line so it will slow you down a little bit.

If the wind is coming from behind you, then the same proportions can be applied to work out the tail wind component, so if it is 30 degrees off your tail, it is .9 of the strength of the wind and so on.

For working out a diversion, you can apply this percentage to your airspeed to get the groundspeed, and then to work out drift interpolate the following formula as well. The formula is that at 120 knots airspeed, half the cross wind component is drift. So if you are flying at 90 knots then your drift would be 25% more than half the drift.

Chris has been flying since 1965 and had had a variety of flying since then, mostly on light aircraft, and much of it single crew with no autopilot with many landings. He also has over 2500 hours instructing, and his varied experience is a huge benefit to his students. Chris is CFI of the Cotswold Flying School at Kemble in the UK.

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/hobbies-articles/how-to-quickly-work-out-the-head-and-tail-wind-component-in-your-head-1464544.html

Article Tags: Flying, Pilot Training, Pilots, Landing, Flying Training, Flight Planning, Cross Wind Component, Head Wind

Related Videos
Related Articles
Ask / Related Q&A

Play

Not a Flying Car but a Plane that Drives

Play

How to Protect Your Windows from Wind Damage

Play

Vagrant Story Gamplay - Part 37: More Snowfly Forest

Play

Brave Fencer Musashi Gameplay (PSX) - Part 62: We Can Fly!

Play

How To Play Baseball: Fly Ball Outside Routes

Latest Hobbies Articles
More from Chris Puddy

Rifle Scope Adjustment - Three Rifle Scope Adjustments to Help Achieve Better Accuracy

By: Jerry Rodriguez | 21/11/2009
Rifle scopes come in various sizes, each having its own unique layout fitted for your shooting or hunting needs. There are three rifle scope adjustments will help you achieve a higher level of accuracy. Variable power, wind, elevation, and parallax adjustment. These four adjustments, when used correctly will make for optimum precision shooting.

Branding Your Design Collection

By: Gary Capps | 21/11/2009
Having a name is a very important part of one's identity. We spend a great deal of time thinking about the perfect name to give to children and even to pets. Yet you take a great deal of time designing and planning your own jewelry, but don't take a little time to think about your jewelry name. Even titling a work of creativity can be pretty tough and would take a lot of time for you to decide and there would surely be lots of mind-changing going on. When branding your jewelry...

Phone Bead Charms

By: Gary Capps | 21/11/2009
Everyone nowadays owns a cellular or mobile telephone. Some may even have more than one enough to insert one Sim card for all the networks available. It is one way of expressing your social status as well as voicing out your own identity. So why not accessorize it to make it speak more about you? Permit people to find out how artistic and into craft you are. It is completely amazing to understand the endless possibilities you can do with a few strings, some colorful beads and ...

Consign Your Design

By: Gary Capps | 21/11/2009
Is your jewelry making a hobby or a business? If you have decided to take a stage further in your beading hobby and have decided to make a career out of it, you may choose to take one of 2 options. First is to open your own boutique or perhaps consider setting up your internet jewelry store where you can sell your products or you can consign it with established shops and galleries. Consignment deals can be an easy way to make cash out of your designs. It saves you the hassle o...

Learn How to Use a Bead Loom

By: Gary Capps | 21/11/2009
Beading is said to be the most favourite hobby of many folks today. Many of them are just doing it as a past time, and some take it as a professional way of building up a business. There are various forms of beading which includes seed beading and tapestry beading. The great thing about tapestry beading is that you can include many different types of beads into your creation to give different effects. If you do fimo bead making or make your own hand-crafted glass beads then you can...

Different Types of Stringing Material

By: Gary Capps | 21/11/2009
There are various s of material required in making jewelry, and choosing the right kind for you is very important. One of the most vital materials is the string, whether or not it is for a necklace, bracelet, or anklet you would like to make. Picking the right stringing materials is a total must. When choosing the best string for your jewelry, you have got to consider the type of jewelry you would like to create, the design and style you want to achieve, and the type and size of the...

Finding Jewelry Making Patterns

By: Gary Capps | 21/11/2009
Jewelry making is fashionable today ; increasing numbers of bead fan are creating noise in the business industry. If your one of the many aspirants in making your own jewelry, and perhaps owning all ready to be used material, then you're just about there taking your first step. In making jewelleries, first thing you will need to find is your materials, and one of the most significant tools is the jewelry making pattern. A jewelry making pattern is a tool that shows you how to m...

Jewelry Repair Additional Income For Jewelry Business

By: Gary Capps | 21/11/2009
You may consider jewelry repair service to be an additional earnings for your jewelry business. This will expand your enterprise buy doing repairs with jewelries that have missing hand-crafted glass beads, broken clasps, and partially unstrung. If you'll notice, many clients are searching for a jewelry repair stand, and sometimes they're misunderstood when they are going to a jewelry shop. If you may try and understand them, they just go to jewelry shops asking for repairs becau...

How to work out a cross wind component in seconds when on final approach to land an aircraft

By: Chris Puddy | 16/11/2009 | Hobbies
When flying an aircraft it is necessary to be aware of the head and cross wind component when landing in order to stay within the pilots, or aircraft limits.