|
|
|||||||
| Home Page |
|||||||
What Diamond Shall I Choose?
I would like to give you some advice on buying a diamond engagement ring or any diamond ring for that matter. I have compiled this for those with experience and those without so that you can make the best possible purchase and to keep as reference.
A diamond has three basic parts which are the crown, the girdle and the pavilion. Each is faceted differently but in the end, they compliment the whole diamond and produce the best possible sparkle. You want the facets to be of excellent symmetry. When buying a diamond, you need to know about the four C's which are cut, color, carat (weight) and clarity. The cuts which make up the facets are what bring out the best in a diamond or the worst in some cases. The cuts cause the fire or brilliance of a stone to be brought out, which is all done by hand. If a stone has a crown that's too shallow or too deep or a pavilion that is too shallow or too deep then the light will be reflected everywhere you don't want it to go and cause the stone to be dim. You want an idea cut. Stones come in many different cut varieties. There are many shapes other than round that can be cut. There are square, marquise, trilliants, oval, pear etc... The list goes on and these are all considered to be fancy cut stones. These are a little more unusual, for those that want something unique and not the traditional style stone. The clarity of each diamond is measured by the amount of inclusions it has or has not. The difference between inclusions and blemishes is that an inclusion is an internal flaw and a blemish is external which is on the surface. The grade of clarity that you should pay attention to are flawless (FL), internally flawless (IF), Very very slightly included one and two (VVS1 & VVS2), Very slightly included one & two (VS1 & VS2) and you can stretch to slightly included one, two and three (SI 1,2&3) which are not too bad most of the time. Depending on where the inclusions are within a stone and depending on the types of inclusions there are, if they are blemishes or inside the stone, it can effect how the light is reflected within the stone and back out. Sometimes inclusions can be beneficial though, if you go to insure your stone, the inclusions can act like a finger print to which you can ID it. The ideal color for a colorless stone is classed as a "D", which means there is no tints or hues and it is absolutely white, D, E & F are the most ideal colorless diamonds, G, H, I and J are tinted slightly and anywhere beyond that and you are looking at a yellow diamond and going into brown as you move along the chart to Z. When dealing with carat (weight), bigger is not always better, you have to take into consideration an important factor. For example, if you are looking at a 1.25ct diamond next to a 1.0ct diamond and they both cost the same price and are the same color but the cut on the larger 1.25ct diamond isn't the most ideal cut to allow the light to be used to its full potential as I've written before and so the smaller 1.00ct is the better option as the light will be utilized better by the stone and create the "fire" look, which the dazzel is so commonly refered to as, when the light is reflected out. You'll be aiming for very good to excellent cut and remember, size doesn't always matter. Another alternative stone type to consider is a lab enhanced stone and in actuality, lab created diamonds are exactly the same as a natural diamonds, with the same elements and structure with the only difference being where the diamond is formed. Lab diamonds are grown under controlled conditions. They can have great quality, cost less and are valued and graded the same way a natural diamond is plus you can get lab reports for them too. The important thing though, if you are buying a diamond, is that you like it. Not because on paper it ticks all the right boxes but because you can see yourself wearing it everyday and not growing tired of looking it. I hope this information is a help to you and your quest for buying a diamond. Thank you for the time you took to read this article.
Rate this Article:
Current: 0 / 5 stars - 0 vote(s).
Article Tags: Diamonds, Cut, Color, Clarity, Carat, Lab Diamonds, Shaped Diamonds Article Source: http://www.articlesbase.com/home-and-family-articles/what-diamond-shall-i-choose-457301.html About the Author:
If you are in the postion to buy a diamond engagement ring. Then it is important to understand the make up of a diamond in order to make the right decision. Use my website http://www.buyingadiamondengagementring.org and check out my blog for my latest articles at http://diamondenagementrings.blogspot.com
Related ArticlesLoose Diamonds Basics Ten Things to Know About Loose Diamonds Ten Things to Know About Loose Diamonds Here are Some Diamond Buying Tips to Make Popping the Question Easier Guide to the Ultimate Engagement Ring Diamond Cut Diamond Carat Weight: Shoppers Buying Guide Diamond Clarity: Shoppers Buying Guide Got a Question? Ask.Ask the community a question about this article:Frequently Asked Questions What color stands for sex? Where can I buy a 10-14 carat gold eyeglass chain Black tap water 505 women's jeans Hair color Can I use Procion Dyes on my white hair? Latest Home and Family ArticlesCeramic Floors - How to Tile Them The Teddy Bear Hidden Wireless Camera is Very Convenient to Keep an Eye on the Nanny Baby Shower Party: Shower Invitations Tips For Moving in With Stepfamilies Doing Zero-Gs in a Lift Chair Benefits of Metal Roofing How to Remove Carpet Stains Using an Au Pair For Child Care More from Gavin ConwayWill the Dollar Ever be Restored to Its Former Glory? Getting Your Head Around Paper Money to See the Gold Buying Gold Bullion Through the Internet Hedging the Dollar With Gold |
|||||||
|
Article Categories
|
|||||||
|
|
|||||||