Handy Steps on How to Remove Wallpaper

Removing wallpaper can often be painstaking and messy. If you find your old wallpaper drab and plain you may find the need to remove it and replace it with a new one.

Learning how to remove wallpaper can take a step by step procedure. There are handy tips that can teach you on how to remove your wallpaper without necessarily being messy and disorganized.

Here are handy steps that will teach you how to remove wallpaper in no time. First you will need the following: bucket, scraping tool, wallpaper stripping solvent, paint roller or sponges, cloth, fabric softener and vinegar.

Initially, lay cloth unto the floor or on anything you would like to protect. Using small nails to keep the cloth in place can be handy. Remove anything that gets in the way on the area where you want to remove the wallpaper.

Cover electrical outlets and lights and shut the circuit breaker. Remove the switch plate's cover and keep them on a safe place with its screws. Prepare a hot water to place on the bucket. Follow the instruction of the stripping solution on how to mix it with the hot water. A good alternative on how to remove wallpaper is to use either vinegar or fabric softener.

Soak the paint brush to the bucket of hot water and stripping solution and start painting an area which you can do within 15 minutes of stripping as the solution dries more than this duration. You can slowly assess on how much solution you should paint to soften the wallpaper for easy stripping.

Strip big pieces of the wallpaper as much as possible. Have a garbage can close nearby. Learning how to remove wallpaper can be a fun activity. Think of the pleasure of renovating your walls with a better design with a delightful outcome.

Once the solution gets too cold that makes stripping the wallpaper a bit difficult, it is time to make a new batch of stripping solution. Take note not to dump the old solution in the sink or tub as it can result to a slower drain.

It is best to strip one layer of wallpaper at a time once removing a multiple layer of wallpaper. After stripping the wallpaper, let the wall dry. In case you cut the wall, you may use a sand paper to even out the surface.

When removing the wallpaper, the vinyl coating often peels off first. Continue to soak or paint the wallpaper with more solution and strip again. Then use the scraper tool to finish the remaining edges.

Learning how to remove wallpaper may sound easy but it actually requires your time and effort. However, becoming prepared on how to remove wallpaper in an organized way will help you save time.

These handy steps on how to remove the wallpaper can give you a good hand on how to remove wallpaper in a safe and efficient manner. Learn to have fun while stripping out your old wallpaper while looking forward to a newer look of your wall.