Ozone Generators Kill Mold and Mildew

<h1>Ozone Generators Kill Mold and Mildew</h1>Author: <a title="Kenneth Brumleve" href="http://www.articlesbase.com/authors/kenneth-brumleve/36170.htm">Kenneth Brumleve</a> Mold and mildew are tremendous health hazards. At the very least, they can cause fungus infection and skin allergies when they come in contact with the skin and eye irritation when they get into the eyes. However, mold and mildew can cause more serious and chronic ailments, such as allergic rhinitis, asthma and lung infection, especially when there is gradual exposure over time. That is why it is very important to kill mold and mildew as soon as signs of them appear in the house.

There are many ways to kill mold and mildew. Some ways involve using household chemicals such as disinfectants and cleansers that are formulated to kill mold and mildew. These household chemicals need to be used with care, as getting in contact with the mold and the mildew is harmful in itself, and getting in direct contact with these household chemicals can burn the skin too.

Another proven method used to kill mold and mildew are ozone generators. Ozone generators use what is called “high ozone shock treatment” to deal with mold contamination.

Ozone generators produce ozone by converting oxygen into ozone with high voltage, much like lightning in the sky. Ozone has the ability to oxidize mold, thereby disabling its capacity to reproduce and eventually killing it. High concentrations of ozone are necessary to effectively decontaminate mold and mildew infestation.

But to optimize the effectiveness of ozone generators, it is important that the problems concerning the water seepage, the humidity and the lack of ventilation in the area to be contaminated be first addressed. Ozone generators work best in dry places. Also, the area to be decontaminated must be evacuated because ozone is also toxic to humans, plants and pets. After the treatment is done, suffient time should be allowed so the ozone can turn back into oxygen before the area is reoccupied. Usually an hour or two is sufficient.

The concentration of the ozone to be produced by ozone generators depends on the size and the degree of contamination in the affected area. Naturally, if the room is large and the contamination is high, it is necessary for the concentration of the ozone to be high as well. High quantities of ozone are needed to shock the mold and mildew; if the ozone is too weak, the decontamination will fail.

After the decontamination with the ozone generator is done, the dead mold should be removed completely and all contaminated building materials and furnishings that cannot be cleaned should be disposed of. Doing this will prevent the mold and mildew contamination from recurring and from further endangering the health of the people staying in the affected area.

Ozone generators are effective tools used to kill mold and mildew. To maximize their effectiveness, they should be used carefully and correctly.About the Author: <a href="http://www.jenesco.com">Ozone Generators</a> are your best solution for the <a href="http://www.jenesco.com/reduce-mold.html">Removal of Mold</a>, mildew and odors. Ozone bonds at a molecular level with toxins and odors rendering them inert while leaving pure oxygen behind. For more details visit <a target="_blank" href="http://www.jenesco.com">http://www.jenesco.com</a>Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/home-improvement-articles/ozone-generators-kill-mold-and-mildew-301594.html" title="Ozone Generators Kill Mold and Mildew">Ozone Generators Kill Mold and Mildew</a>

Mold and mildew are tremendous health hazards. At the very least, they can cause fungus infection and skin allergies when they come in contact with the skin and eye irritation when they get into the eyes. However, mold and mildew can cause more serious and chronic ailments, such as allergic rhinitis, asthma and lung infection, especially when there is gradual exposure over time. That is why it is very important to kill mold and mildew as soon as signs of them appear in the house.

There are many ways to kill mold and mildew. Some ways involve using household chemicals such as disinfectants and cleansers that are formulated to kill mold and mildew. These household chemicals need to be used with care, as getting in contact with the mold and the mildew is harmful in itself, and getting in direct contact with these household chemicals can burn the skin too.

Another proven method used to kill mold and mildew are ozone generators. Ozone generators use what is called “high ozone shock treatment” to deal with mold contamination.

Ozone generators produce ozone by converting oxygen into ozone with high voltage, much like lightning in the sky. Ozone has the ability to oxidize mold, thereby disabling its capacity to reproduce and eventually killing it. High concentrations of ozone are necessary to effectively decontaminate mold and mildew infestation.

But to optimize the effectiveness of ozone generators, it is important that the problems concerning the water seepage, the humidity and the lack of ventilation in the area to be contaminated be first addressed. Ozone generators work best in dry places. Also, the area to be decontaminated must be evacuated because ozone is also toxic to humans, plants and pets. After the treatment is done, suffient time should be allowed so the ozone can turn back into oxygen before the area is reoccupied. Usually an hour or two is sufficient.

The concentration of the ozone to be produced by ozone generators depends on the size and the degree of contamination in the affected area. Naturally, if the room is large and the contamination is high, it is necessary for the concentration of the ozone to be high as well. High quantities of ozone are needed to shock the mold and mildew; if the ozone is too weak, the decontamination will fail.

After the decontamination with the ozone generator is done, the dead mold should be removed completely and all contaminated building materials and furnishings that cannot be cleaned should be disposed of. Doing this will prevent the mold and mildew contamination from recurring and from further endangering the health of the people staying in the affected area.

Ozone generators are effective tools used to kill mold and mildew. To maximize their effectiveness, they should be used carefully and correctly.

Ozone Generators are your best solution for the Removal of Mold, mildew and odors. Ozone bonds at a molecular level with toxins and odors rendering them inert while leaving pure oxygen behind. For more details visit http://www.jenesco.com

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/home-improvement-articles/ozone-generators-kill-mold-and-mildew-301594.html

Article Tags: Mold Spores, Kill Mold, Mildew Remover, Ozone Generators

Related Videos
Related Articles
Ask / Related Q&A

Play

How to Start Your Own Mold Farm

Play

How Mold Affects the Body

Play

Stop Odors when Your Refrigerator is Switched Off

Play

How to Clean Your Books

Play

How to Remove Mildew from your Home

Latest Home Improvement Articles
More from Kenneth Brumleve

Garage Door – Keeping It In Shape

By: Thomas Ajava | 02/01/2010
Garage doors are actually pretty amazing if you think about it a bit. A large, flat panel is rotated up and down either in sections or one big flat plane at least a few times a day without any problems. Well, that is as long as you do some maintenance on your door.

Replacing Windows In Your Home

By: John H Carol | 02/01/2010
Your decision to replace the windows of your home might have been made due to one of many reasons - such as to increase the energy efficiency of your house, or to improve the look, or to protect your furnishings, or to improve security. However, once you have made the...

Necessary Bathroom Vanity to Pamper Yourself at Home

By: Jasper Zidan | 02/01/2010
What is the purpose of a nice shower when you have to rush somewhere? Day to day chores is so tiring that after that your body craves for a perfect spa treatment. Do you have time to spend hours in the spa? Well if you have all the necessary bathroom...

Bathroom Vanity Design Based on the Practicalities

By: Jasper Zidan | 02/01/2010
There is a proverb "If anyone wants to know the nature of an unknown neighbor, must have to see his bathroom to understand him". So your bathroom vanity furniture and set up will explained your real feature, nature and your likings. So you must have to choice your vanity furniture's...

Bathroom Vanities Have Become a Focal Point Now Days

By: Jasper Zidan | 02/01/2010
When you think of bathroom décor, many things come in your mind as there are many elements that can be replaced. Many colors of walls and tiles that make the bathroom stand out above others. The ability to change the bathroom vanities for good mood and fresh feeling is always...

Some Awesome Bathroom Vanities For Corners

By: Jasper Zidan | 02/01/2010
People look at their sinks or tiles and think how to achieve a fresh feel, therefore there is a quick update desired to change the look of the bathroom. Bathroom vanities for corners are perfect for small types of bathroom with shortage of space. Corner vanities are stylish and there...

Different Types of Bathroom Vanities For Your Bathroom to Look

By: Jasper Zidan | 02/01/2010
Bathroom vanities are nothing but floor-standing units onto which a bathroom sinks are fitted. They can be cheaper or expensive depends upon one's budget .The cheaper bathroom vanities s are made of fiberboard and veneer or laminate finish which are available at low cost. Solid wood are the expensive one. Bathroom...

Shower Cubicles For UK

By: Amaan Goyal | 02/01/2010
Thinking about buying a shower cubicle? Go ahead and purge yourself in the market, where variety will come to you in its full form. Shower cubicles are not new to us; they have been in the market for as long as you could remember. Though there have been considerable changes...

Using an Ozone Generator in Mold Remediation

By: Kenneth Brumleve | 11/01/2008 | Home Improvement
Mold remediation is an important step towards getting rid of deadly mold in homes and other infested buildings. It begins with fixing the water and humidity problems besetting the affected area, and then followed by killing the mold and physically removing their remains. It is vital that mold remediation is done completely and thoroughly, or else the mold infesting the building will only grow back.

An Ozone Generator is a Great Mold and Mildew Remover

By: Kenneth Brumleve | 11/01/2008 | Home Improvement
There are many mold and mildew removers available out there in the market today. Some of these are household chemical products such as cleansers and disinfectants that are used for scrubbing away at mold and mildew. Some are industrial-strength chemical products that are applied to really nasty cases of mold and mildew.

Ozone Machines are Great for Removing Mildew

By: Kenneth Brumleve | 06/12/2007 | Home Improvement
Wet rags, wash cloths, clothes, carpets, doormats and other fabrics that have been left damp for over 24 hours seem harmless enough but they can become loaded with mildew without proper ventilation. Actually, any wet object can be a site for growing molds in the home.

Ozone Machines are an Economical Way to Remove Mold

By: Kenneth Brumleve | 06/12/2007 | Home Improvement
Molds naturally occur in the environment as a decomposer. It thrives in places that are humid and wet. Water is a necessary ingredient for the generation of mold in the environment. Molds, however, do not just emerge outdoors, but may also be found in buildings and homes. Flooded homes and buildings with leaky roofs, water leaks, and drainage problems, are favorite sites to find mold. Mold can often be found in damp basements, kitchen cabinets, attics, laundry areas, and shower rooms.

Ozone Generators Will Eliminate Mold and Mildew

By: Kenneth Brumleve | 06/12/2007 | Home Improvement
In 1999, the Mayo Clinic has observed that sinusitis can primarily be attributed to mold exposure. Many cases of asthma are reportedly caused by exposure to mold and mildew as well. These fungi that appear both outdoors and indoors release airborne allergens that causes a variety of ailments in varying degrees of seriousness. Commonly, surface molds produce mild to moderate ill effects while the most notorious ones, the toxic molds, could lead to more severe health concerns. One such mold is known as the stachybotrys.

Ozone is the Best Mold and Mildew Remover

By: Kenneth Brumleve | 04/11/2007 | Home Improvement
Mold indoors may lead to mildew. Mold is essentially fungi that propagate in very humid and poorly ventilated locations such as the corners of the house, the bathroom, the kitchen drawers, under the sink, and damp places. Mold reproduces through its spores and these spores like to attach themselves to wet places and things.

Mold Spores Can be Killed With Ozone

By: Kenneth Brumleve | 04/11/2007 | Home Improvement
Mold, one of the most notorious allergic naturally occurring substances, can be found not only outdoors but indoors as well. This fungus which often takes the shape of a fuzzy, sometimes velvety clump can be found almost anywhere. Outdoors, they are more commonly found and in their highest quantities, around and on decomposing matter such as rotten logs, trash, dead animal bodies, and in moist and dark areas such as canals. In the environment, molds are able to contribute to natural processes by speeding up decomposition.