Door frame reinforcement

Front Door Security Tips - three ways to Stop Home Intruders from Kicking In Doors!

The FBI asserts A home is invaded each 12 seconds by someone going right through a front or back entry. Secure your doors.'

the best way for a someone to destroy in to your home is to just kick in the exit. The is the way that the vast majority of home attackers and thieves enter a home. Actually, they come right thru the door over seventy percent of the time...and eighty percent of the time the door frame fails, not the door locks as most of the people believe.

Just How Does someone Kick In the Door? door frame reinforcement

most frequently doors are 'Shoulder Slammed' or'Mule Kicked' by intruders. 'Shoulder Slamming' is just driving one's shoulder into a door with great force. 'Mule Kicking' is when a person turns their back to the door and kicks it in the same way that a mule kicks with his hind leg. 'Mule Kicking' a door is an intruder's favourite way to gain access as it lets him see who could be watching him from the street and beyond, plus it can open a door in a split second when done in the correct way.

The 4 Reasons Why Doors can Be Kicked In So Easily... door frame reinforcement

1. Most door frames on homes are nothing less than two 2' by 4' pine studs nailed together and covered with thin ornamental wood trim.

2. Most door knobs and deadbolts are poorly secured in the door .

three. Most door hinges are held to the entryway and door frame with screws about one in. long or less. ( Go remove a screw from one of your door hinges and you will see )

4. Most entryway frames have a little, thin, feeble strike plate that's held in with screws less than one inch long.

the way to Correct weak exit Latch and entry Frame Problems...

there is very tiny realistically that you can do to fix the fact that your walls and door frames are made from soft wood 2' by 4' studs. It's just a fact that most houses are built in this fashion. But what can be done is to brace all of the puny areas which are the most prone to fail.

one. Put a metal door guard over the areas where your gateway knob and deadbolt are that extends to the very edge of the door. This prevents the door knob latch and deadbolt come from having the ability to be broken out of the door.

2. Replace the short typical one inch screws in the hinges with 2.5' long screws in the hinge side going to the door frame and put 1.5' screws in the hinge side that attaches to the gateway. This deters the hinged side of the exit from being able to be kicked out.

3. Replace the small 1 to three in. strike plates on the door frame with a five foot metal door beefing up product such as the gateway Security Pro entry Security Guard ( available from : http://www.doorsecuritypro.com ). This inhibits the latch side of the entryway from having the ability to be kicked open. This 5' metal strike plate serves a twin purpose. It replaces the little puny strike plates with something much stronger and it hinders weak gateway frames made from soft wood from splitting. When the door frame splits, that is what causes the door knob and deadbolt to permit the door to open. The Door Security Pro will also easily fix a damaged entryway frame.

exit Knobs and Deadbolts

except for what's noted above, ensure you have top quality door knobs and deadbolts, preferably the newer'pick proof' models.

It does you tiny nice to have fortified your entry frame and hinges if the quality of your locks is poor. By the same token, good entry locks alone aren't going to prevent a entryway kick in. You may address and correct all the drawbacks if you're to be absolutely protected.
door frame reinforcement
The old saying...'An ounce of prevention is worth a pound of cure' most definitely applies when thinking about your door frames and exit locks. Fix them now even though it's fresh in your brain. In fact , what's more valuable than your safety, your family's safety and your home? door security