How Is Tap Water Tested For Contamination In Your Locality?

How is tap water tested for contamination? Have you asked this question yet? Of course, there have been plenty of reports from several research institutes stating that tap water is badly contaminated, highly dangerous to drink it or use it for other purposes on a regular basis. But, as you know, the quality of drinking water is not the same across the whole country. It differs from state to state. So, you need to test the tap water in the area you live in to get an idea of the pollution level and what you need to do about it.

 If you ask your municipal authorities the question ‘how is tap water tested for contamination', they will probably say that it has been tested as per rules and that the contaminants found in water are within the standard limits set by the EPA. However, time and again it has been proven that the amount of contaminants in tap water is far higher than what is actually allowed by the EPA.

 This is not just the case with one or two states, but nearly 30 states across the country. Tap water samples from these states have been tested and it has been found that the level of microbial contaminants and chemical contaminants were far higher than what is prescribed by the EPA.

 How can this happen? The answer is simple. Chlorination is the only method used by the municipal authorities across the country to disinfect water. Unfortunately, chlorine is just a disinfectant. It cannot get rid of the toxic chemicals present in tap water. So, unless you test the tap water you get, you cannot be sure how badly it is contaminated.

 If you are a home owner, you can test your own tap water by using a home water testing kit. Using such a kit, you can test your tap water for microbes, chlorine level, heavy metals, and so on. After seeing the results, you can look for a good water filter that will get rid of this pollution.

 Since the water you get can have a variety of contaminants like cysts, microbes, chemicals, and drugs, you need to go for a water filter based on a good technology that can get rid of all these contaminants. Multi level filtration is a good option. Multiple active carbon filters seem to work well in removing such contaminants - a fact which has been proven by several tests done by water testing institutes. So, try to get an active carbon water filter to get the best results.

 Now that you know the answer to the question ‘how is tap water tested for contamination', you need to act immediately. You should make sure that neither you nor your family Have to drink contaminated water ever again. So, get a good water purifier today and keep diseases at bay.