Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS
Kitchen sinks are of various types like single bowl and double bowl single drain and double bowl double drain. In homes the use define the type to be fixed. For restaurants or heavy use areas, the most common is the double bowl double drain. This is also being used homes today. When preparing to fix this sinks its prudent to check the drain outlets and water inlets. It is to ensure that they conform to what is being replaced and availability.
In fixing a kitchen sink whether in a new or old house, the place to mounted it must be accessible underneath. This allows servicing the drain outlet in case of blockage or leakage. Most of this is opening compartments below the bowl. When ready to commence fitting, remove the old sink first. Measure the granite top to accommodate the new one and cut or grind accordingly. Hack off the splash backing or tiles above it then fix new before replacing.
The kitchen sink comes with drain cocks and waste water fittings. Confirm this are included in the package. After hacking off the splash backing, fit the sink to ensuing it overlaps properly on the granite block. Remove add silicon and fit again pressing firmly for it to bond round the joint between bowl and granite. This stops seepage on this joint. Open the mixer to lay the splash backing whether of tiles or granite. Clean and grout the tiles.
Now that the kitchen sink is in place, Pick the waste pipes and bottle trap and join together. Ensure that the instructions for joining with adhesive are followed. Tie the drain from underneath and ensure its water tight. Take the kitchen mixer and tie it back to the water outlets. Add the drain cocks to the bowls. After this run the water and fill the sink to check the system if it is leaking. Finally Clean off excess silicon and any adhesive.
In fixing a kitchen sink whether in a new or old house, the place to mounted it must be accessible underneath. This allows servicing the drain outlet in case of blockage or leakage. Most of this is opening compartments below the bowl. When ready to commence fitting, remove the old sink first. Measure the granite top to accommodate the new one and cut or grind accordingly. Hack off the splash backing or tiles above it then fix new before replacing.
The kitchen sink comes with drain cocks and waste water fittings. Confirm this are included in the package. After hacking off the splash backing, fit the sink to ensuing it overlaps properly on the granite block. Remove add silicon and fit again pressing firmly for it to bond round the joint between bowl and granite. This stops seepage on this joint. Open the mixer to lay the splash backing whether of tiles or granite. Clean and grout the tiles.
Now that the kitchen sink is in place, Pick the waste pipes and bottle trap and join together. Ensure that the instructions for joining with adhesive are followed. Tie the drain from underneath and ensure its water tight. Take the kitchen mixer and tie it back to the water outlets. Add the drain cocks to the bowls. After this run the water and fill the sink to check the system if it is leaking. Finally Clean off excess silicon and any adhesive.
- Related Videos
- Related Articles
- Ask / Related Q&A
- Stainless Steel Is No Longer Just For Kitchen Sinks
- Remodeling Made Easy - Buy a Kitchen Sink Online
- Useful Tips About Choosing Kitchen Sinks
- Selecting the Right Kitchen Sink
- Kitchen Sinks; Essential Element Of Design And Function
- Modernize Your Kitchen With New Appliances
- Importance Of Choosing The Styles Of Kitchen Sinks
- Kitchen Sinks and Taps Information




How To Reduce Your Home Refrigerator Power Consumption
By: Will Yap | 23/12/2009Where does most of the energy go? The main consumption of energy goes to the heating and air conditioning unit. Next, it is the home refrigerator which is consuming the most power. Our fridge is left running all the time. We do not switch it off unless for servicing or repair works. To keep the fridge cold, a lot of power is used to run the compressor motor. Therefore, any measure we take to increase the efficiency of the refrigerator will reduce our monthly utility bill substantially.
Why should a homeowner install vinyl window
By: Michael Peter | 22/12/2009If a homeowner has quality windows it will define the character of a home. They make it functional, livable and comfortable.
Layouts & Designs For A Spacious Kitchen
By: Jeff A Hardy | 22/12/2009Kitchen is the favorite place of every woman where they spend most of the time cooking for their relatives and friends. They enjoy cooking and they try there best to manage space in the kitchen so they could make it look beautiful and hygienic.
Porcelain tiles adding oomph to wall and floor
By: Marcony Damn | 22/12/2009The desire to adorn one's home in stylish and unique way and porcelain tiles are the best thing for external as well as internal cladding.
Why Do You Want to Remodel Your Kitchen?
By: Jim Atkins | 22/12/2009If you have a room in your house that you just don’t like, and it’s your kitchen – then it’s time to remodel! Most older kitchens in Florida simply don’t have enough space to accommodate today’s lifestyles.
Freezers – Which Style Is Best?
By: Thomas Ajava | 22/12/2009If you are considering buying a freezer, one of the first questions will be which one is best for your particular situation. There are two basic styles. There are pros and cons for each, which we discuss in this article.
Wood Kitchen Cabinet Doors
By: R Oberoi | 21/12/2009Read the detailed info on wood kitchen cabinet doors for your kitchen. Check how to pick the color and what are the online stores from where you can buy the wood kitchen cabinet doors.
The Key Elements of a Contemporary Style Kitchen
By: Oliva Crawford | 21/12/2009One of the first questions you must answer before creating a contemporary kitchen is "What is a contemporary kitchen?" The elements of a contemporary styled kitchen are clean edged, streamline appearance, and a focus on function versus form.
How to make an sprinkler irrigation system in a garden
By: Andrew Karundu | 20/12/2009 | LandscapingAn irrigation system in a garden can be formed into a feature when it is turned on. It is a timed system where pipes and sprinklers jet out water to irrigate the garden. The system has a storage tank and a pump to boost the water into the sprinklers.
How to lay a traditional reed roof
By: Andrew Karundu | 17/12/2009 | RemodelingReeds are weaved and used in basket making. However they can also be used for roofing. These are traditional roofing materials in some cultures of the world communities.
How to make rammed earth wall construction
By: Andrew Karundu | 13/12/2009 | ConstructionRammed earth walls are made using stabilized soil compacted in a form work. This method of erection using stabilized soil is fast for earth wall construction. The walls are strengthened using posts at the corners and mid points.
How to lay cement plaster on an earth wall
By: Andrew Karundu | 09/12/2009 | Interior DesignAn earth wall is made using soil mixed with water and some cement. The soil walls are used in beach huts or cottages in warm areas. This rooms are very comfortable to stay in during the hot weather.
How to make a sheet metal gate house
By: Andrew Karundu | 01/12/2009 | RemodelingA gate house is located at entrance of a home. The unit is used to house the guard during adverse weather conditions. It can also be used as a small outdoor storage space.
How to make a dust bin receptacle
By: Andrew Karundu | 28/11/2009 | GardeningA dust bin receptacle is located at the entrance of a home. This is for the access by the garbage collecting company. This is a structure that should be covered as per the public heath authorities regulations.
How to make a splash apron around a building
By: Andrew Karundu | 27/11/2009 | LandscapingA splash apron is a surface made around a building about four or more feet wide. This is done about a foot or more from the concrete ground floor level. It is done with concrete slabs, stone slates, vegetation or timber decking.
How to lay a swimming pool decking
By: Andrew Karundu | 24/11/2009 | RemodelingThe swimming pool decking is an area immediately after the water surface. This area should create a relaxing atmosphere. It should be flat and safe to walk or lie on.