How To Install Marble On Bathroom Floors

Bathrooms, in any household, should comprise of state-of-art facilities and cleanliness. While there are many of appliances available in the market for bathroom use, nothing comes closer to marble tiles.

Marble bathrooms provide an aesthetic appeal and elegance to the household, they are affordable also, and with proper maintenance, they can go on for years to come. Some consider it to be the finest natural stone available for floor furnishings.

So, what is the procedure for installing marble on bathroom rooms?

Firstly, know that you have two options- there are professionals who will do the job for you or there is ‘you’ who, if you want, can accomplish the job successfully.

Hoping that you choose the second option, read on to know the steps for installation.

1. Preference- In every worthwhile store you will come across marble tiles of varying textures, sizes, designs, patterns, color schemes, and finish. They are custom made for wide variety of applications around the house so first of all, you need to choose what type of tile would you want to install in your bathroom. Remember that the color and design of the tile should compliment the color and furnishings of the bathroom as well. In other words, they should not mismatch or else, it will have quite a negative consequence. To highlight the presence of tiles, consider buying marble countertops to match the tiles.

2. Flooring- After selection, come to the first part of installation. In the beginning, you need to analyze how much the floor is safe to use. It means, is the floor, and sub-floor sturdy enough to withstand pressure. To test this, make a person stand at one end of the floor and you on the other side, then jump a few times. If there is no vibration, it means that the level is sturdy and on level. You can check the leveling by noticing the alignment between the level and the floor.

3. Testing And Installation- Determine how you would like to place the tiles. Then place the tiles in the same manner without using mortar. If the alignment and method of placing the tiles is perfect, the tiles will fit in naturally. After the test run, set the tiles in place in exactly the way you had planned. Do not leave any empty space between tiles. If there are, use mortar to fill in.

4. Drying- After placing the tiles, let it alone for complete drying. Do not fiddle with it until it dries. Afterwards, chalk out the excess dried mortar, level the tilled floor and it is ready for use.