David Shaffer is an Network & System Engineer And Have Over 10 years Experience Of Networking Systems & Operating Systems. He Has More Networking Information And Resources For Your Learning at Ccnaguru.com
RIP (Routing Information Protocol) is the routing protocol and one format of Distance Vector by the nature of RIP that it will sending all routing table data by itself go out to neighbor router in every 30 second and work on UDP and on port 520 numbers, that's why make RIP work slow and consume the very resource of router more when compare with other routing protocol such as OSPF Routing Protocol and EIGRP Routing Protocol these sending out for updated routing table only.
For the factor of choosing best route path on RIP, it will choose the routing path route that have least Hop Count, that is one factor for choosing by the topmost space or Maximum Hop Count of RIP that 15 router or 15 hop count only if have more 15 will can not seek the route path or inaccessible, which RIP that will work well with the network that have small-sized and it will can not work efficiently in large-sized network because of the limitation about Hop Count and the lateness in routing table update at must exchange both of the table and must wait for 30 seconds before change the routing table.
This below is the step for how to configure RIP to your router.
- Login to router Global Configuration Mode with this command
Router#enable
- Change to RIP Routing Configuration with command
Router(config)#router rip
- Change for run to RIP version 2
Router(config-router)#version 2
- Step for setting up an your network address of your router interfaces that your router interface has connected to. For example we'll setting for two network address as below
Router(config-router)#network 192.168.1.0
Router(config-router)#network 192.168.50.0
- If in Network you has Discontingous Network Address or have don't conform address if you set for router use Auto-Route Summarization feature sometimes may have the error in something route which the command will come use to stop doing Auto-Summarization this for example.
Router(config)#router rip
Router(config-router)#no auto-summary
- If in your router connected goes out to WAN Link far exceed location more than limits that you wants true such as if you have network address 172.16.1.0, 172.16.2.0 and 172.16.3.0 and already set for both three interfaces of router but, while you set in router rip you will necessary must set in Classful Network Address like 172.16.0.0 which in this example if 172.16.3.0 networks are you set it run on other routing protocol such as OSPF or EIGRP and you don't want a result that routing rip go to disturb WAN Link traffic go to interface at you don't want you can stop traffic that be from RIP sending to that interfaces with this command.
Router(config)#router rip Router(config-router)#passive-interface
- If you want to send routing update cross interface at have doing Passive Interface go to destination interface at run RIP once more, This interface may be interface behind interface that do Passive Interface make RIP broadcase traffic usually don't arrive come to, you can make specify RIP traffic cross to interface of Passive Interface come to the uprightly destination with the command as follows.
Router(config)#router rip
Router(config-router)#neighbor
RIP Troubleshooting and Debug Command
show ip route - Use for show routing table
show protocols – Use for show Routed Protocol such as IP, IPX and view for status of that routed protocol interface
show ip protocols – Use for show routing protocol status and RIP timing update and Administrative Distance (AD)
debug ip rip – Use for view step on sending network address on RIP and view for RIP changing topology
undebug all – Disable for Debug Process
This is the basic information and how to setting up RIP Routing Protocol in to your network it is simple and fast for setting up on small-sized network and use on classful ip address to apply on, but for the large network we'll apply for the classless routing protocol such as OSPF or EIGRP that is these routing protocol it have a very performance and stable for the lage-sized network or hard working network, but you can do with the high knowledge or have more skills on networking system and routing protocol.
More Networking Information And Resources Such As CCNA Training, CCNP Training And Much More About Network Certification.
- Related Videos
- Related Articles
- Ask / Related Q&A
Easy Ways to Make Money
By: donkeymailer | 31/12/2009Although there are thousands of different ways to make money online in the comfort of apartments and keep increasing the number every single day. But most of them are not easy to make money online.
Cisco 640-553 exam
By: andy | 31/12/2009With our products and ample questions practice, there is no possibility of you failing the exam. For most of the questions exam of Implementing Cisco IOS Network Security (IINS) repeats the questions but changes the answers, the values etc and hence presence of mind and soundness of concepts is a must. Unless you know the gist of the theory, you cannot pass the exam.
EC0-350 exam torrent
By: andy | 31/12/2009Certinside remains one of these most updated websites which is popular all over the world for its manifold characteristics. It keeps excellent information on IT Certifications and provides the current data. It has not only thorough information on every certification but also provides you your required study materials for your targeted certification. Certinside is the best choice for you.
642-145 test questions
By: andy | 31/12/2009It is well known that Others 642-145 exam test is the hot exam of Cisco certification. Cisco certification exam offer you all the Q&A of the 642-145 real test . It is the examination of the perfect combination and it will help you pass 642-145 exam at the first time!
000-667 study guide
By: andy | 31/12/2009There are many sites which provide information on IBM 000-667 exam and provide you study materials like IBM 000-667 dumps and others. To make a good preparation for this highly professional exam you must have a complete knowledge and for that you must use an authentic source. Certinside is the best source to prepare for your IBM 000-667 exam for 100 percent results.
642-586 exam torrent
By: andy | 31/12/2009Certinside rightfully deals an IT test as a board exam. The first thing you have to do with Certinside is check out the sample objectives. You will get an idea of the actual products. Once you have the hang of the pattern of the test exam will be a piece of cake. Since the test comprises of multiple choice questions, in preparation of the test choice making is the most important thing to learn.
000-237 Exam Study Questions
By: andy | 31/12/2009Certify Dumps Q&A are designed to maximize your learning productivity and focuses only on the important aspects that will help you pass your exam, the first time. We provide you IBM 000-237 Study Questions with verified answers accompanied by detailed explanations. These Study Questions are supplied by our industry experts, to provide you with an experience like taking the actual test and ensure that you fully understand the course, as well as the concepts behind the 000-237 Q&A.
350-030 braindump
By: andy | 31/12/2009A passing grade on the beta qualifies a Cisco certification candidate to schedule the lab exam. Results, however, are typically not available until six to eight weeks after the close of the beta. A candidate may attempt the beta 350-030 study guide only once during the beta period.
Cellular Phones Shopping Strategy
By: David Shaffer | 28/04/2009 | ComputersLook for a service plan suited to the way you intend to use the phone. Then select a handset that will perform reliably when and where you expect to make your calls. - Choose the service plan first. Your yearly service bills will probably dwarf what you pay for the handset....
Basic Rip (routing Information Protocol) Implementation
By: David Shaffer | 29/05/2008 | NetworksBasic Information Guide About How To Setting Up Routing Information Protocol (RIP) On Your Router And How To Use The Trubleshooting And The Debug Command For RIP Routing Protocol.
The Origin of Linux Distribution
By: David Shaffer | 28/05/2008 | Operating SystemsThe Origin Of Linux Distribution, Information About What Is Linux Distribution Or Linux Distro You Should To Know How Linux Group Can Distribute There Linux Distro To Other Before Start To Learning Linux Operating System.