Mankind has always been preoccupied with measuring and recording the passage of time. Timekeeping has been essential for the development of civilisations; from knowing when to plant or harvest crops to identifying important events in the year.
Time has historically been measured in relation to the movement of the Earth; a day, is one revolution of the planet; while a year is an entire orbit of the Sun. Calendars were developed from as far back as 20,000 years ago when hunter-gatherers scratched lines and gouged holes in sticks and bones to possibly count the days between phases of the moon.
Civilizations from the Ancient Egyptians to the Roman Empire have used differing methods to discover what day of the year it is. However, measuring time as it passed throughout the day had always proved difficult to early mankind. Sundials were perhaps the first time pieces and they can trace their origin back over five thousand years; when obelisks were built, possibly to allow the telling of time by the cast of their shadows.
However, the time told on a sundial was based on the movement of the sun in the sky, which would differ throughout the seasons and of course would not work on cloudy days or at night. Other methods such as water clocks or the hourglass would simply act as crude timers. Telling the time of day would prove difficult with people relying on comparisons as time references such as: “As long as it would take a man to walk a quarter mile.”
People were reliant on these methods and others such as bell ringing to indicate important moments until the 14th century, when mechanical clocks first appeared which were driven by weight and regulated by a verge-and-foliot escapement (a gear system that advancing the gear train at regular intervals or 'ticks'). These clocks were far more reliable than sundials or other methods allowing accurate and reliable telling of the time of day for the first time in human history.
The next step forward in horology came in the 17th century when the pendulum was developed to help clocks maintain their accuracy. Clock making soon became widespread and it was not for another three hundred years that the next revolutionary step in horology would take place; with the development of electronic clocks. These were based on the movement of a vibrating crystal (usually quartz) to create an electric signal with an exact frequency.
While electronic clocks were far more accurate than mechanical clocks it wasn’t until the development of Atomic Clocks and around fifty years ago that modern technologies such as communication satellites, GPS and global computer networks became possible.
Most atomic clocks use the resonance of the atom caesium-133 which vibrates exactly at a frequency of 9,192,631,770 every second. Since 1967 the International System of Units (SI) has defined the second as that number of cycles from this atom which makes atomic clocks (sometimes called caesium oscillators) the standard for time measurements.
Atomic clocks are accurate to less than 2 nanoseconds per day, which equates to about one second in 1.4 million years. Because of this accuracy, a universal time scale UTC (Coordinated Universal Time or Temps Universel Coordonné) has been developed that maintains a continuous and stable time scale and supports such features as leap seconds - added to compensate for the slowing of the Earth’s rotation.
However, atomic clocks are extremely expensive and are generally only to be found in large-scale physics laboratories. However, NTP servers (Network Time Protocol), the standard means for achieving time synchronisation on computer networks, can synchronise networks to an atomic clock by using either the Global Positioning System (GPS) network or specialist radio transmissions.
The development of atomic clocks, GPS and NTP time servers has been vital for modern technologies, allowing computer networks all over the world to be synchronized to UTC.
About the Author:Copyright 2008 © Richard N Williams
Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated time server products; ethernet clocks, GPS time servers, NTP servers, digital wall clocks, atomic clock servers and SNTP time servers. Please visit us for more information about NTP products and NTP servers This article may be republished and reprinted in its complete form or in part without seeking permission providing a relevant link to this site is maintained. It is a violation of copyright law to reprint or publish this content without following these terms.
Latest Networks Articles
Imagination.io
By: Ryan | 24/07/2008
Domain is the distinguished part of an abstract or physical space where something exists, is performed, or is valid. For example, we may talk about: domain of interest, domain of activity. This concept is used in every branch/sector/field of human activity.
imagination.io
A website (alternatively, web site or Web site) is a collection of Web pages, images, videos or other digital assets that is hosted on one or more web servers, usually accessible via the Internet.
Linux – Getting the Correct Time
By: Richard n Williams | 21/07/2008
This article epxlores the beast way of keeping accurate time on Linux/Unix systems.
Touch Screen Technology – the Death Knell for the Computer Mouse
By: Richard n Williams | 21/07/2008
This article explores the demise of the computer mouse and how it is being replaced by other technolgies sucha s touch screens.
Accuracy in Timekeeping, Clocks and Their Development
By: Richard n Williams | 21/07/2008
This article explores the development of lcocks throughout the ages, from sundials to atomic clocks
How to Build and Configure Your Own Radio Referenced Ntp Time Server
By: Richard n Williams | 21/07/2008
This article explains how to build and configure your own radio referenced NTP server
Mcse Boot Camp
By: Smit Mathur | 16/07/2008
An MCSE certification makes a tremendous difference in how a person is viewed in the organization. MCSE boot camps include everything that is needed to prepare and pass the examination.
Using Msf as a Timing Reference for Ntp Servers
By: Richard n Williams | 15/07/2008
This article explores ow to use the National radio broadcast as a timing reference for an NTP time server.
Creating Your Own Social Network: Creating New World!
By: Nisha Garg | 14/07/2008
Nowadays, society has become necessary everywhere. Whether we talk about the real world, or the cyber world that is running on the internet, being in social network is what every person demands.
Computers 
