The author is a pet lover and web copywriter connected to a company that specializes in wireless dog fence , dog containment system and other affordable dog fence products that are safe and easy to install.
Most dogs adapt well to outdoor living as long as they have access to shelter. They also need to have a good place to escape from the weather, and unless you're willing to let him in the house.
Building a doghouse is a great family project, and may be a good opportunity to involve the kids in a construction project.
Here are some of the tools you need in building a wood dog house:
• Hammer
• Table saw or Circular saw
• Pen or pencil
• Plywood
• Paintbrush
• Hearing Protection
• Drill and Safety glasses.
• Carpenter's square
• Tape measure
• 8' 2x4 (to be cut into 2x2's)
• 4'x8' sheet of 5/8" exterior siding
• 10' 2x4, rated for outdoor use
• Shingles (optional)
• Finishing material (paint or nontoxic wood preservative)
• Nails—16d for base, 8d for house, and short roofing nails if using shingles
The first step you will have to take on this project is consider your dog's habits. For example, some dogs like to sit on top of their wood dog house. If you suspect that this may be the case with your dog, don't put any roll roofing or shingles on the top of the house since they can get hot in the summer sun. Just use an exterior plywood panel, treated with a nontoxic preservative like linseed oil.
The next step is to measure the size of your dog, his or her height sitting up, stretched out, length laying down, and measure his or her width at its widest body part which is its shoulders. When your dog is standing up, measure her from the top of her front shoulder to the ground, tell her to sit and measure her from the top of the head to the ground. Then just add about four inches to these measurements and then you are ready to proceed. Figure out how much and what lumber you will need.
Thick plywood is a suitable choice for the floor, roof and side walls. After you have purchased your materials and measured and cut them, you are now ready to build the
dog house
.
Insulate the doghouse. A wood dog house should protect your animal from the elements and keep him warm. Use weatherproof plywood exterior panels to build the outside walls. Then insulate the ceiling, floor, walls with 1.5 inch Styrofoam sheets.
You may also want to paint your doghouse with black or white color. If you live in a cold climate, paint the doghouse black. Black doghouses absorb heat and stay warmer. But if you live in a warm climate, paint the doghouse white. The color white reflects heat, keeping the doghouse cool.
Outdoor living is not for every dog. If your dog is old and has lived inside your house for a number of years, it will not adjust to living outside, even with a doghouse. Acclimatize your dog to outdoor living when it is young and the weather is warm. And once your dog starts sleeping in a doghouse, she should stay there. Don't bring her into your house on some nights and leave her in the doghouse on others because then she will never fully adjust to outdoor living.
- Related Videos
- Related Articles
- Ask / Related Q&A
- How to Build a Wood Dog House
- Free Dog House Plans – Build Big Fancy Dog House or Simple Dog Houses?
- Wood Dog House – What Type of Materials to Use for Your Doghouse?
- Things to Consider in Buying a Dog House
- Custom Cedar Dog House – Advantages of Building Your Own Wooden Dog House
- Discover Dog Houses Facts
- Insulated Dog Houses – Keep Your Dog Warm With a Warm Dog House
- Building a Dog House - Tips and Tricks To Build a Dog House
Rough & Tough Beds For Rough & Tough Pets
By: Arthor Pens | 10/07/2009There are a lot of pets who act very violently and rough on their sleeping places. Mammoth Pet Beds withstand all the activities that your pet carries out and that is why you'll love the bed.
Loving Your Miniature Pinscher
By: John Jackson | 10/07/2009When they first came into existence, the Min Pin was a ratter and extinguisher of similar size vermin. Nowadays, the breed has come into favor as a family pet. When considering a Min Pin as your dog, you need to keep in mind that their original character traits have not been bred out and these will need some special attention.
Find Ways to Make Them Stop Barking - Dog Barking Tips
By: Bryan Burbank | 09/07/2009The dog is man's best friend but if you have a dog that barks all the time then this can be a problem for you. It is important to know that there are things you can do to control when and how your dog barks. All animals do things for reasons, and when your dog is barking and chasing cars and in most cases, it is to protect you. You have to understand that the dog thinks that you are being threatened by a passing car so they may barking and chase it. You need to teach your animal win is a prop
Find the Best Horse Buying Tips Available
By: Bryan Burbank | 09/07/2009Before you run out and buy a horse there are some things that are important for you to know. When you go to look at a horse make sure that the seller does not try to tell you that you better buy now because if you wait you are going to lose out. This is a way for him to try to make a quick sale and you may not get the best deal or the best horse so make sure you are cautious when making a purchase. You also do not want to tell the seller what you are willing to spend because this is only help hi
Allergies In Dogs
By: Ras Reed | 09/07/2009Allergies in dogs is one of the several problems that dog owners or lovers rarely understand. They always feel that it is a temporary problem that will soon disappear. Actually, it is not temporary and if you don’t take action immediately, the problem may become worse. This piece of writing is written to help you understand this problem and what you can do to solve it.
How to Choose Pet Cremation Jewelry
By: Mark Hamilton | 09/07/2009It's sad when a close animal companion leaves this world. I've experienced it several times and each time I feel a strong need to have some sort of keepsake to remember my pet by. Some of the items in my memory box include baby kitten and puppy teeth and a...
Finding A Groomer For Your Maltese
By: John Jackson | 09/07/2009You are most likely aware that the Maltese is a long haired dog and that long hair requires maintenance. Perhaps your Maltese will arrive complete with dog beauty salon chair and styling guide.
All The Colors Of The Doberman Pinscher
By: John Jackson | 09/07/2009Many people are not aware that a Doberman Pinscher can be any color other than black with marking that are tan. Although this may be the most typical color, the breed actually has two genes for color. One gene is for black.
Tips on Welding Sheet Metal
By: Andrei Smith | 11/06/2009 | Home ImprovementWelding sheet metal is a complicated job that necessitates precision, accuracy and safety procedures. One of the common problems often encountered by welders working with sheet metal is that they can easily make huge holes instead of welds. Without the proper skills and techniques, the heat can immediately melt the metal and the liquid metal will fall out of the part that is being fabricated.
Advantages of Laser Welding
By: Andrei Smith | 29/05/2009 | Tools & EquipmentIn recent years, the use of laser beams in welding has steadily increased due to continuous demand for precised steel products in construction and other industrial purposes. Due to many of its advantages, the technology of laser welding is being used in a wide variety of applications in the metal fabrication industry. Many welding experts are now recognizing how efficient laser welding is when it comes to producing better quality fabricated metal products at better productivity and much lower co
The Art of Metal Fabrication
By: Andrei Smith | 11/05/2009 | Home & FamilyThe art of fabricating metal has been around for centuries. Ancient civilizations invented various handtools and came up with different methods of manipulating metal in order to accomplish their work in a short span of time. With the discovery of metal ore, and the development of techniques of applying heat to take out metal from the ore, handtools became more advanced.
Different Ways of Cutting Sheet Metal
By: Andrei Smith | 27/04/2009 | DIYThere are many different ways of cutting sheet metal. You can get the job done by using simple tin snips, large powered shears or bulky computer-operated machinery for more precise cutting.
Forge Welding Facts
By: Andrei Smith | 30/03/2009 | Tools & EquipmentForge welding is said to be the oldest welding technique ever used by early blacksmiths, dating back to the Iron Age when ancient Egyptians and people from Eastern Mediterranean began to refine the craft of welding iron metals together.
Benefits of Pet Beds
By: Andrei Smith | 26/03/2009 | PetsWhy is it essential to give your four-legged bestfriend a place of his own? The answer is quite simple – all dogs, regardless of size, breed or age, need a soft and comfortable bed to sleep on.
10 Useful Tips on Sheet Metal Fabricating
By: Andrei Smith | 18/03/2009 | Tools & EquipmentThere is nothing more satisfying than being able to complete a sheet metal fabricating task flawlessly and efficiently. Regardless of what metal component you are using, you can always come up with a utilitarian piece or a work of art for as long as you put patience and dedication to your project.
Proper Welding Attire
By: Andrei Smith | 09/03/2009 | Tools & EquipmentWelding is a hazardous activity that poses safety and health risks if precautionary measures are not followed. One effective way of preventing accidents when working with welded materials is by wearing the proper welding attire.