One of the most common methods used for binding documents is spiral coil binding. It is popular because of its modern look and functionality. Using spiral coil binding takes a little practice. Armed with the tips in this article, you’ll be well on your way to becoming a spiral coil binding veteran.
Spiral coil binding can be done using several different hole patterns. The hole pattern is described in terms of pitch. Pitch represents the number of holes per inch. 4:1 pitch is chosen by the overwhelming majority of people, although 5:1 and 3:1 pitch are also available. When using the 4:1 pitch, please remember that even though the pitch is standardized, the total number of holes varies. Some systems use 43 holes, and others use 44. Be careful when purchasing prepunched items for spiral coil binding projects and double-check the number of holes your binding system uses.
You may be tempted to use oversized covers for binding your documents; however, this is not a good idea. Not only is it difficult to handle a larger cover, but when you attempt to align the punched paper with the cover, you will most likely end up with extra holes.
Because the majority of coil binding machines are not equipped with disengageable dies, it is difficult to create spiral bound documents in nonstandard sizes. Some spiral binding machines and modular punches are available with disengageable dies to allow for the creation of other sizes of documents. Disengageable dies allow users to prevent individual pins from punching holes so that you don’t end up with a half hole on the edge of your sheets.
Once you have properly punched the holes into the document, the next step is to insert the spiral coil into the holes. To do this, you take the spiral coil and spin it through the holes on the edge of your book. Some machines are equipped with a spiral coil inserter. Pay attention as you do this to ensure you don’t spin the spine right off the other side of your proposal.
That said, the last thing you need to do is crimp the coil’s ends to keep the spiral coil in place. For best results, you should do this with coil crimping pliers. Keep the spine facing towards you and the red indicator dot facing up. While you could attempt use needle nosed pliers, it will likely be an exercise in frustration to do so.
Most documents under one inch thick are easy to bind with colorcoil; however, larger documents can be tricky. To prepare to insert the binding, you will need to arrange the document so that it is appropriately curved where the coils will be inserted. Although the majority of coil binding machines include spine shapers, you may want to consider purchasing a separate spine-forming device if you need to bind many thick documents. You should also note that you will most likely not be able to use your inserter for large diameter coil book binding.
With this background information in mind, you have a good foundation in the basics of spiral coil binding. While you may not become a master of spiral coil binding immediately, with a little practice you will develop an eye and hand for this great book-binding style.
Related Articles
Tips for Choosing a High-quality Spiral Coil Binding Machine
By: Jeff McRitchie | 06/02/2008 | Presentation
Making sense of all the different spiral coil binding machines and their options can be difficult. If you need more information on these machines so you can make an educated purchasing decision for your school or office, this article will help you to better understand the equipment and choose the spiral coil machine that is best for you.
Choosing A Binding System: Six Reasons To Choose Spiral Coil Binding
By: Jeff McRitchie | 17/01/2008 | Business
Choosing the right binding system to fit the needs of your organization can be a very difficult task. There are almost a dozen different binding styles available on the market all with their individual strengths. However, one of the most popular binding styles available today is spiral coil binding and...
Matching the Hole Pattern for Rebinding a Bound Document
By: Jeff McRitchie | 22/01/2008 | Presentation
This article is designed to provide a quick overview of the different hole patterns used for binding documents.
Do it yourself Publication Ideas
By: Jeff McRitchie | 05/02/2008 | Business Ideas
Perhaps you have ideas about publications you would like to bring to life. Like most would-be publishers, you probably believe that fancy equipment and oversized production facilities are a must. You could not be further from the truth. Self-publishing is possible. Even better, self-publishing is simple and affordable. All you need is a tabletop and the right equipment. The specific type of equipment you will need will depend on the type of document you would like to publish.
An Overview Of Spiral Coil Binding
By: Jeff McRitchie | 15/01/2008 | Business
Are you looking for a new style of binding for your reports and documents? Perhaps spiral coil is a good fit for you. Spiral coil binding uses a colored plastic element that is preformed into a spiral coil that is wound onto the edge of your book and then crimped...
Producing and Binding High Quality Training Manuals
By: Jeff McRitchie | 06/02/2008 | Presentation
The process of hiring and training new employees is time-consuming and expensive. Once you have found and hired new employees, training them as quickly and completely as possible is critical to maximizing productivity and profitability. One of the best ways to ensure consistent, quality training and orientation for all employees—new and old—is through the use of high quality training manuals.
Book Binding With Spiral Coil
By: Jeff McRitchie | 06/02/2008 | Presentation
Do your presentations and reports need a facelift? Spiral coil binding may be just the answer. Colorcoil binding works by inserting a plastic spine through holes punched along the edge of the document. The ends of the plastic coils are crimped to hold the binding in place and keep your pages secure. This document finishing style is also known as plastic-coil or color-coil binding.
Tips and Tricks for Binding Thermal Documents
By: Jeff McRitchie | 12/07/2007 | Business
This article provides tips to make thermal book binding easier and to ensure that the quality of the finished product.
Got a Question? Ask.
Ask the community a question about this article:
Q&A Powered by:
Latest Presentation Articles
Powerpoint Presentation Success Tips - Critical Things That You Never Aware
By: Sayid Aksa | 05/09/2008
Understand the critical things to bring success on your powerpoint presentation
Dodge Park Rest Home and Day Club to Hold 41st Anniversary Open House
By: Steve Dubin | 03/09/2008
Dodge Park Rest Home and Day Club, a 60-resident rest home with a separate private social day and respite program, will hold a formal 41st Anniversary Open House on Thursday, September 18, 2008 from 3 p.m. to 7 p.m. at 101 Randolph Road in Worcester, Mass.
Is Business Location Important
By: Dontrell Lyons | 01/09/2008
Did you know that a comic book shop is next to impossible to turn profitable unless it is located on a major street?
Have You Found Your Own Voice?
By: Leslie Ungar | 30/08/2008
Speaking from the heart, to the heart, directly, not too complicated, would summarize the fine art of any speaking, period.
Conference Interpreters at Work
By: Betty Carlson | 29/08/2008
In the first of a series about different forms of language interpreting, we will take a look at the tasks involved in conference interpreting.
Pest Control in San Diego
By: Groshan Fabiola | 27/08/2008
More and more we live in society where there is less and less actual person to person contact. So often when I contact a business, I dial, push 2, push 4, etc, until I can hear the appropriate recorded message telling me to leave a recorded message
3 Ways to Cash in on Public Speaking
By: EarlyToRise | 26/08/2008
In March, I spent four hours giving two seminars at the Learning Annex in Los Angeles - and I walked away with about $2,000 in my pocket. Since I needed to be in Los Angeles anyway for other business, that money is what I would call "gravy."
Easy Public Speaking With Hypnosis
By: Michelle Beaudry | 24/08/2008
You can undo why you fear speaking in front of others, quickly and easily, using hypnosis. Here are the basics you'll need to know first.
More from Jeff McRitchie
Xyron Personal Cutting System Electronic Die Cutting Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Xyron Personal cutting system is a computerized die cutting machine that is designed for cutting out shapes and letters for use in scrapbooking, crafting and for design applications. The system uses font books and shape books that allow you to quickly and easily choose the shapes that you want to cut out using the machine.
Xyron Ez-laminator Cold Process Laminating Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Xyron Ezlaminator is a 9" manual cold process laminator designed for users that occasional need to laminate items and documents. It is ideal for small offices and personal lamination usage and is popular for use in creating scrapbooks, crafts, signs and stickers.
Unibind Xu638 Six Heater Binding Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Unibind XU638 is a high volume binding system that is specifically designed for print shops, large organizations, binderies and other large volume Unibind users. This system offers the ultimate in productivity. In fact, it can bind up to 48 documents, reports or presentations at one time.
Unibind Xu338 Triple Heater Binding Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Unibind XU338 is a high volume professional binding solution that is designed for organizations that need to bind large numbers of reports quickly and easily. With three heating units and three cooling compartments it is possible to bind as many as twenty four documents at one time using this machine.
Unibind Xu238 Dual Heater Binding Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Unibind binding system offers a solution for organizations that are looking for a highly professional binding system without the need to punch and bind their reports and presentations. In fact, Unibind offers the look of a perfect bound document without the need for huge equipment or messy glue. The XU238 is designed to offer productivity, durability and versatility to companies who are looking to bind their documents using Unibind.
Reviewing the Unibind Xu138 Single Heater Binding Machine
By: Jeff McRitchie | 31/03/2008 | Shopping
Unibind offers a binding solution for companies that don't want to have to punch and bind their books and documents. It provides the look of a perfect bound book without the need for any punching or inserting.
Unibind X-tower Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Unibind X-Tower is a special storage rack that is designed specifically to hold your Unibind binding covers and spines. However Unibind X-Towers can be used for more than just storage. They can also be used to create a highly professional work surface for use in binding your reports, presentations and proposals.
Unibind St1025 Ten Heater Binding Machine Review
By: Jeff McRitchie | 31/03/2008 | Shopping
The Unibind ST1025 is the largest and most feature-rich Unibind binding system available on the market. The ST1025 has ten heating units for binding up to fifty documents at a time. It also has nine cooling racks and the ability to store up to 2400 Unibind covers.
Business 
| Posted: 06-02-2008 | Comments: 
