Remember Me
forgot your password?

Instructions of Car Charger

Generally, the car charger of GPS, mobile phone is used with built-in voltage converter circuit which can convert it into voltage 5V to compatible with the USB interface, so that when the use of USB charging cable can be plugged into a computer USB port, and charged into the car. As for the nominal charge current of 1.5A, it means that it is capable of providing the maximum output current, but not once connected to GPS, mobile phones, it can have such a big circuit, which is easy to understand for people who have studied Ohm's law.

Reasons for a car charger to cause failure are the careless design of vehicles and the shoddy production quality, while the common reason is blown cigarette lighter car insurance, so it is important to choose a high quality car charger.

There are some rules for people to use a car charger:

Safety first

Danger or harm may be occure by unproper fixing or using car charger. Please read the instruction book carefully before use, especially notice the warning and notice part. You are prompted to pay attention to some certain conditions or some operatiom method which may harm for converter or other facilities and warn you that some cases may lead to personal injury.

Warning: Electric shock hazard, children away from

1. AC output socket of converter has potentially danger which is just like General appliance socket that can be fatal, so it should take the same as household appliances socket.
2. Do not insert anything intot converter or ventilation hole.
3.Converter can not be watered.
4.Usually,electriferous AC wires can never connect directly with the converter .
5. Violation of the above operation may arise personal injury or converter damage.

Warning: Surface heat

Under the condition of overtime or high power use, surface temperature of converter shell will up to 600C. When it is used, make sure the scope of the surrounding 5CM of converter is ventilation and do not put the objection that easily effect by high temperature nearby.

Warning:
1. Do not insert a car charger used  DC power supply in converter.
2. Do not put converter under the place where the temperature higher than 50C.

Car Charger(CC801)

 

 

 

 

john lee

by Shuoguan car charger

Rate this Article: 0 / 5 stars - 0 vote(s)
Print Email Re-Publish

Add new Comment



Captcha

  • Latest Sales Articles
  • More from john lee

If You Have The Smallest Amount Of Sales Ability...This May Be For You!

By: Father Time | 07/01/2010
You can make money from home, if you really want to!

US Stock Futures Lower With Retailers In Focus

By: guccishoes | 07/01/2010
In Europe, auto makers paced an early dip, though U.K. supermarket chain J Sainsbury PLC (JSAIY, SBRY.LN) climbed on stronger-than-forecast sales. London markets are awaiting an interest-rate decision from the Bank of England at 7 a.m., EST. Policymakers aren't expected to make a change to monetary policy, including the central bank's money-creating asset-purchase plan.

Spyker To Make New Offer For Saab Thursday

By: airjordan | 07/01/2010
"We will make an offer today," Muller said, adding that GM has set a deadline at 2200 GMT and that he is confident the new offer will be accepted. He declined to say how Spyker plans to finance its offer and said that he has "no idea" if Spyker is the only bidder for Saab.

C900 Quad band Windows Mobile 6.1WiFi Touch Screen Smartphone

By: peipei88315 | 07/01/2010
C900 Quad band Windows Mobile 6.1WiFi Touch Screen Smartphone

T718+ TV Dual Card Quad band Cell Phone Free 2GB Card

By: peipei88315 | 07/01/2010
T718+ TV Dual Card Quad band Cell Phone Free 2GB Card

K930 TV Dual Card Quad band Hiphone Cell Phone

By: peipei88315 | 07/01/2010
K930 TV Dual Card Quad band Hiphone Cell Phone

F026 Dual Card Quad band WIFI TV Touch Screen Cell Phone

By: peipei88315 | 07/01/2010
F026 Dual Card Quad band WIFI TV Touch Screen Cell Phone

D9000 WIFI TV Dual Card Quad band Cell Phone Free 2GB Card

By: peipei88315 | 07/01/2010
D9000 WIFI TV Dual Card Quad band Cell Phone Free 2GB Card

Single Screw Extruder and Twin Screw Extruder

By: john lee | 10/08/2009 | Sales
Conventional single screw extruder is not suitable for WPC forming operation, because it processes the weak ability for material transmission and plasticization. The transmission affection of single screw extruder mainly depends on the role of friction.

Seamless Steel Pipe

By: john lee | 10/08/2009 | Sales
Seamless steel pipe is a long steel pipe with hollow sections and has no joints surrounding the steel bar. It is mainly used as a pipeline to transfer the fluid, such as oil, natural gas, water and some solid materials, etc. As compared to the flexural torsional strength in the same light, it is an economic cross-section steel.

Categories of Racking

By: john lee | 05/08/2009 | Sales
Platform racking system refers to a rack that is built on the base of the existing workplace. To make full use of available space and meet actual demands, platform can be flexibly designed into one layer or multiple layers based on the design specifications of steel structures.

General Knowledge of Seamless Steel Pipe

By: john lee | 04/08/2009 | Sales
Seamless steel pipe is a long steel with hollow sections and has no joints surrounding the steel bar. It is mainly used as a pipeline to transfer the fluid, such as oil,natural gas,water and some solid materials,etc. As compared to the flexural torsional strength in the same light, it is an economic cross-section steel.

Instructions of Car Charger

By: john lee | 04/08/2009 | Sales
Generally, the car charger of GPS, mobile phone is used with built-in voltage converter circuit which can convert it into voltage 5V to compatible with the USB interface, so that when the use of USB charging cable can be plugged into a computer USB port, and charged into the car.

Analysis of the Advantages of Extruder with Switched Reluctance Motor

By: john lee | 04/08/2009 | Sales
The screw of an extruder driven by switched reluctance motor can be operated through the gear of the motor, which can realize speed control under extrusion rate and the pressure. Generally, an extruder processes its own characteristics: wide range of speed adjustment, steady speed and high precision, small starting current, large starting torque. Due to a small heat-driven system, the occurrence of burning motor and controller is significantly reduced.

Three-phase Car Charger

By: john lee | 14/07/2009 | Sales
In recent years, the widespread use of car chargers in electric vehicles is the so-called three-phase car charger.

Submit Your Articles Free: Signup

Use of this web site constitutes acceptance of the Terms Of Use and Privacy Policy | User published content is licensed under a Creative Commons License.
Copyright © 2005-2008 Free Articles by ArticlesBase.com, All rights reserved. (0.26, 1, w2)