Permabond is a leading manufacturer of engineering adhesives, supplying high-quality industrial adhesives to customers worldwide. Permabond has offices in The Americas, Europe and Asia and a worldwide network of distributors to assist you with your specific bonding and sealing requirements. To learn more, please visit Adhesives.
Bonding two components might be possible with nothing but a dab of epoxy but a less expensive, more effective, or faster curing solution might occur with a cyanoacrylate (instant adhesive) or one of the many other adhesive chemistries available in the marketplace.
Choosing the right adhesive the first time will save time and money.
After reading the following summary descriptions of some adhesive chemistries your knowledge will have increased and selecting the right adhesive will be easier. Of course, before using any chemical product, always read the Material Safety Data Sheet and Technical Data Sheet for safe handling.
Anaerobics
Anaerobic adhesives cure when in contact with metal but without any contact with air. Examples of applications are thread lockers used to lock bolts into nuts, retaining compounds, form in place gasket materials, and pipe sealants.
Cyanoacrylates
Cyanoacrylate adhesives cure by reacting with trace amounts of moisture on the surfaces that will be bonded. A cyanoacrylate adhesive is the best choice for rubber and most plastics, and is commonly referred to as instant adhesive or super glue.
Toughened Acrylics
Toughened Acrylics are structural adhesives for high strength applications, such as aluminium panels on a truck body, or portable housing structures. They come in one and two part systems and work well on a wide variety of surfaces. These adhesives are quite versatile, working with minimal surface preparation, and are flexible when cured.
Epoxies
Epoxy adhesives work on a wide variety of materials and form strong, durable bonds. They are available in one and two part systems and can be purchased with a mixing tip that eliminates manual stirring of components.
Polyurethanes
Polyurethane formulations cover an extremely wide range of stiffness, hardness, and densities. These materials include: flexible foam used in upholstery and bedding, low density rigid foam used for thermal insulation, soft solid elastomers used for gel pads and print rollers, and hard solid plastics used as electronic instrument bezels and structural parts.
Silicones
Silicone adhesive products aren’t incredibly strong, but are quite flexible and resistant to high temperatures. Two-part silicone products tend to work more effectively than the one part products. These are a popular choice for shower and bathtub repairs.
Phenolic
Phenolic adhesives require heat and pressure for the curing process, but have been proven to be excellent in bonding metals, or bonding metals to wood. Select these with the assistance of a chemical engineering professional.
Polyimides
Polyimides are based on synthetic organic chains. These are available in liquid and film form, but tend to be more expensive and tricky to handle efficiently. One example of their use is in the electronics industry for flexible cables a wide variety of components. They are available in solid forms, with different melting points and are applied with a heat gun.
- Related Videos
- Related Articles
- Ask / Related Q&A
- Adhesives for Electronic Assembly
- Adhesive Applications on Filters
- What kind of adhesive will stick to …?
- Permabond Expands Magnet Bonding Adhesive Line
- Using the right adhesive for the right situation … Why are there so many kinds of adhesive? Why should you care?
- 5 Steps to choosing the best adhesive for your situation
- How do I prevent white powdery residue when using instant adhesives?
- Permabond Sealant Approved for use in Oxygen Delivery Systems
Antioxidants are H1N1 Influenza’s Achilles Heel
By: Fabio Pacheco | 30/11/2009A recent article featured in FASEB Journal shows that antioxidants, largely found in plant-based foods, might be H1N1 influenza’s Achilles heel, preventing H1N1 virus to invade and colonize our lungs. In addition, the research conducted by Sadis Matalon and colleagues shows that antioxidants can help in the treatment of H1N1 influenza.
Goodwill Moon Rock: Where is Arkansas’s 5 Million Dollar treasure?
By: Atesha | 30/11/2009Where is Arkansas's Apollo 17 Goodwill Moon rock which was given to nation in 1973 and 1974.
Irukandji jellyfish (Carukia barnesi), The most dangerous Jellyfish
By: jamiehanson | 27/11/2009Jellyfish, known for its venomous sting, has several nematocysts along its tentacles. These nematocysts which look like a small capsule secrete venom in a thread like structure inside it.
SCIENTIFIC-TECHNOLOGICAL REVOLUTION: A MEANS OF ENHANCED PRODUCTIVITY IN HUMAN SOCIETY
By: Oseni Taiwo Afisi | 26/11/2009The history of the modern world has recorded remarkable achievements and progress in the quality of life of people, thanks to the developments of science and technology. Although man’s development of science and technology is said to date back to the very beginning of the world, the tremendous influence of the 18th century industrial revolution first in Europe and later the rest of the world on the scientific-technological revolution that occurred during the early 1900s cannot be gainsaid.
Scotland Sits at the Forefront of Stem Cell Sciences
By: Adam Singleton | 26/11/2009Stem cell research is a key area of investigation for many scientists and research centres around the world. With international acclaim for its contributions to the science, Scotland sits at the forefront of the industry.
Global warming
By: aryan | 24/11/2009The process, which increases the temperature of air in the lower stage of atmosphere by the reason of green house effects and pollution, is called global warming.
Top 10 Most Unique Plants in the world
By: smart110 | 24/11/2009This World have a lot of uniqueness, some of them with the plants. Here's some of the most unique plants in the world
How do I prevent white powdery residue when using instant adhesives?
By: Rebecca Wilmot | 17/11/2009 | ScienceFrosting – Blooming – Chlorosis – Whatever you call it, we all recognize it as the unattractive white stuff that can sometimes occur when using instant adhesives. The residue is a byproduct of the cure process of the adhesive. Once the monomer is in vapor form, it will react with moisture in the air, cure, and settle on the surface around the bond area. The short answer to how to prevent blooming or frosting is “fast cure”, or, choose one of the specialty low blooming cyanoacrylate formulations.
Help! I’ve got air in the bond line!
By: Rebecca Wilmot | 04/11/2009 | ScienceThe troubleshooting process begins with a thorough knowledge of the processes leading up to, and including, the application of the adhesive. There are many possible causes for failure of bonded components. Before suspecting air in the bond line as the source of failure, double check the adhesive selection, the application process and the working environment. Make any necessary corrections
How do I achieve desired threadlocker and pipesealant strength?
By: Rebecca Wilmot | 20/10/2009 | ScienceThere are two main things to consider when troubleshooting a threaded adhesive application that isn’t performing to specs. 1. Correct Adhesive Selection, 2. Proper Adhesive Application. First, check the manufacturer’s technical data sheet and compare the relevant properties to the specifications from your engineering or design group.
Chemicals used with Industrial Adhesives – What are they and what do they do?
By: Rebecca Wilmot | 08/10/2009 | SciencePrimers, Cleaners, Etchants, Initiators, Activators, Accelerators and Surface Conditioners are all examples of different chemicals that are used in conjunction with some adhesive applications in order to achieve desired results. The requirements of the process will guide the selection of the appropriate chemical. In some cases the substrates must be primed, in other instances the adhesive cure is triggered with an activator.
Understanding climate factors related to choosing an adhesive
By: Rebecca Wilmot | 22/09/2009 | ScienceAdhesive properties can be affected by temperature and humidity in both the cured and uncured state, so it is important to establish proper storage and to manage the work environment. Every country in the world undergoes seasonal changes, some more extreme in range than others. Global transportation methods encounter changes in environment as well. The result is variable and inconsistent levels of heat and humidity which, in most cases.
Permabond Expands Magnet Bonding Adhesive Line
By: Rebecca Wilmot | 08/09/2009 | ScienceSOMERSET, NJ –Permabond® Engineering Adhesives introduces Permabond TA459 for magnet bonding. TA459 used with Initiator 43 is non-corrosive to copper and other electrically conductive surfaces, providing fast durable bonds to magnets and metals. The non-corrosive nature makes the product ideal for enclosed motors. This high viscosity gel is easy to dispense.
Energy - Reduce costs of gas line repair by not having to destroy the pavement
By: Rebecca Wilmot | 25/08/2009 | ScienceIf you work with an industrial work and repair crew that does a lot of city work, there are a couple of things you can do to win more contracts than the competition: Get better results, If you don’t get great results, you’re probably not going to get as much return business, that’s economics 101. But let’s be honest, this is the city government we’re talking about, here.
Permabond Sealant Approved for use in Oxygen Delivery Systems
By: Rebecca Wilmot | 24/08/2009 | ScienceSOMERSET, NJ –Permabond® Engineering Adhesives MH052 has BAM approval for use with gaseous oxygen up to 10 bar (145 psi) and 60°C (140°F). Standard anaerobic sealants cannot be used for oxygen-rich systems due to instability, which could cause fire or explosions.