Joseph Anthony is the reader & writer of Microsoft Small Business Products.
Have a Solid Plan — Then Change It
Most business start-up stories say that you have to have a business plan. And you do. But that's not the beginning and end of figuring out your start-up costs.
Jeff Shuman, who directs entrepreneurial studies at Bentley College, says, "The conventional wisdom is that an entrepreneur sees an opportunity, comes up with a business plan to capitalize on it, determines the capital that needs to be raised, raises the capital and then applies it to building the business described in the business plan."
There's one major problem with that model, says Shuman. It all hinges on getting the business right the first time, and that doesn't often happen. "In reality, it's likely that some of your initial assumptions are pretty good and others aren't going to be worth the paper they're written on," he says.
Shuman and others say that figuring out your small business start-up costs means regularly reviewing your assumptions and changing your initial model. Writing a plan is good because it forces you to write down everything you are going to need to start your business.
But that initial plan is likely to change repeatedly as you learn new things and incorporate them into the plan.
Be Willing to Pull Back
It's tempting to add up everything you need for the full-fledged business you imagine, and decide it’s what you need to start out.
But pulling back and looking for a smaller model can give you a way to get started while also saving money. Shuman uses the example of someone who calculates the total cost of starting a retail business in a local shopping centre.
"You could start that way and write a business plan based on that amount," he says. "But maybe you'd be better off renting a stand and testing what the demand is for your products at that location."
This consumer testing reduces your initial small & medium business start-up costs. The result is that the initial cycle of your business is dedicated not so much to generating profits as to generating information. "With this, you can fund your business on a cycle-by-cycle basis," Shuman says. "When you go for the second cycle and for expanding your business, the numbers are now based not on focus groups or surveys but on real-world experience."
Calculate Prices and Time Correctly
Calculating your initial cash flow is part of figuring out your start-up costs. It's an area where businesses are sometimes less optimistic than they should be. "Small business owners may under-price their product or service, thinking they have to come in at the lowest price point to compete," says Barbara Bird, who chairs the business management program at an American university. "They don't necessarily need to do that."
Correctly Estimate Your Start-up Time
Yes, when beginning a business, time can be money. Let's say you're going to have fixed costs such as a monthly lease. If you have to make improvements to a space before you can actually open for business, those fixed costs are going to be additional start-up costs until you can actually open for business. I've watched many entrepreneurs draw up a timeline for their ventures and get tripped up on the safety and inspection requirements imposed by local agencies.
For that reason, I think one of the first places a prospective new business owner should go is to the local government planning or license department. Construction permits and inspections can push a prospective opening date back by months. If you fail to take into account the cost of this time, you could be short of working capital right at the start. In order to help all small businesses Microsoft launched low cost Small Business Products.
Be Realistic About the Cost of Money
Many small business owners finance their ventures by running up big balances on their personal credit cards. Others tap the equity in their homes.
But self-financing isn't a practical option for larger ventures. Tom Emerson, who directs the entrepreneurship centre at Carnegie Mellon University in Pittsburgh, says small business start-ups should figure in the cost of capital when determining initial expenses and cash flow. "The cost is usually based on what the interest would be, were that cash invested in something with similar risk on the market" Emerson says. "It's usually a figure that is a few percentage points or more above the prime rate."
- Related Videos
- Related Articles
- Ask / Related Q&A
- Small Business Ideas – Useful Microsoft Products for Small Businesses
- Teen Business Ideas
- Small and Medium Business Centre – Microsoft Software Products Review
- Tips for Safe Computing – Microsoft Small Business Centre
- Small Business Startup Ideas & Tips - Estimating Small Business Start-up Costs
- Improve your Company's Cash Flow - Microsoft
- 10 Step-by-step Business Startup Guide: Step 3
- How to write a Good Business Plan?




Five Reasons to Consider the MBM DestroyIt 2403 Cross Cut Shredder
By: Jeff McRitchie | 04/01/2010The DestroyIt 2403 Cross Cut Shredder gives you a high level of document security with desk-side convenience. If you are looking for a deskside shredder with a lot of power and security to spare, here are a few great reasons that you should check out the DestroyIt 2403 today.
Five Great Features of the DestroyIt 2360 Cross Cut Shredder
By: Jeff McRitchie | 04/01/2010DestroyIt 2360 Cross Cut Shredder offers you high-security, high-power document shredding a mere arms length away. Here are just a few of the great reasons that, if you are searching for a deskside shredding solution, you should check out the DestroyIt 2360 today.
Five Reasons to Check Out the Destroyit 2260 Cross Cut Shredder
By: Jeff McRitchie | 04/01/2010The Destroyit 2260 is a small but feature laden shredder that is perfect for Deskside personal use, giving you top notch security and convenience. Here are just a few of the many reasons you should check out the Destroyit 2260 today.
The Pros and Cons of Dahle Vantage Paper Scissors
By: Jeff McRitchie | 04/01/2010One implement that every office, household, classroom, and individual needs is a good pair of scissors. It's one of those tools that, although you may not use it on a daily basis, when you need it, you need it, and you probably don't want to spend a lot of cash on it. The solution to this problem is a pair of Dahle Vantage Paper Scissors. These are high-quality shears that are designed for cutting paper (i.e. coupons, newspaper articles, craft supplies, etc.) and they're very affordable.
Five Reasons to Consider Dahle Vantage Paper Scissors
By: Jeff McRitchie | 04/01/2010Just about everyone has a pair of these sitting in a drawer or in a pencil cup on top of a desk or even in a sewing basket, but have you ever thought about what you should consider when buying a pair? Or even thought about which pair you should buy? Well, don't fret, because this article will tell you all about Dahle Vantage scissors, which are some of the best - and most affordable - shears available. Plus, it will also fill you in on what makes them great.
Reviewing Dahle Vantage Lever-Style Trimmers
By: Jeff McRitchie | 04/01/2010If you looked at the title of this article and wondered what a lever-style trimmer is, you should know that the phrase is simply a synonym for a guillotine paper cutter. Cutters such as these are great for when you need to cut multiple sheets of paper at once. German manufacturer Dahle makes a very good lever-style trimmer called the Vantage Lever-Style Trimmer.
A Review of Dahle's Vantage Comfort-Grip Shears
By: Jeff McRitchie | 04/01/2010German-based company Dahle not only makes paper shredders and rolling trimmers, they also manufacture scissors and shears. There are four lineups of these products including the company's Vantage Comfort-Grip shears. Although these are not Dahle's premier cutting tools, they are still great for the everyday cutting of paper, craft materials, and more, especially since they are well-made and affordable to boot.
Five Features That Make Dahle Vantage Comfort-Grip Shears Great
By: Jeff McRitchie | 04/01/2010When you use a pair of scissors, do you often find that your hand gets tired even after using them for only a few minutes? And are you looking for some cutters that can cut a wide variety of materials? If so, then you are in luck, because there's a great product that can take care of both of these needs: Dahle Vantage Comfort-Grip Shears. These are first-rate cutters that are easy to use, inexpensive, and they won't wreak havoc on your fingers. Here are five reasons why they're so great.