Construction Basics Of Uid Labels

<h1>Construction Basics Of Uid Labels </h1>Author: <a title="Id Integration" href="http://www.articlesbase.com/authors/id-integration/54252.htm">Id Integration</a> About UID labels The Department of Defense has devised the methodology of UID labels or Unique Identification labels as serializing and marking procedure to keep record of the defense related tangible assets. According to the authorization of DoD, all tangible personal as well as Government Furnished Property, issued on or after 1st January 2004, should be marked with UID labels. However, the DoD plans to mark all tangible as well as embedded assets with UID labels by 31st December 2010. As per the estimation of DoD only 20% of the UID markings will be part marked directly and the 80% will be on name plates or labels. The contractors, supplying the items were also instructed to fill the UID marking registration by May 2006. The permanent UID labels are allowed by Mil-Std 130 standard. According to Mil-Std 130M Section 5.2.7.2.1, "marks that are acceptable as per the requirements for printing on label material in 5.2.7.2.2 shall be acceptable or alternately see appropriate tables in SAE AS9132 (the Aerospace Industry Marking Standard) for quality requirements." The UID labels and the nameplates for the marking and identification of the items should have characteristics such as chemical resistant, chemical resistant, scratch resistant, non-removable. Moreover, they should be readable for the life of the item. The most commonly used materials for UID labels are brushed aluminum foil, polyester and polyimide. There are certain techniques such as laser etching and dot peening are done unto the UID labels to make them withstand the harsh environment condition. The Item that Require UID Labels As per the DoD mandate, there are certain specified items that require UID labels on them. The items • That are serially managed • That are mission essential • Whose unit acquisition cost is $5,000 or more • That are embedded and where it is necessary to have permanent identification The construction basics of UID labels While constructing the Unique Identification for the tangible items there are two basic methods that are essential to be followed. Construct #1 carries information such as part no, serial no, item description Construct #2 has serial no, original part number, lot number or batch number for embedded items Both the construction process should strictly comply with MIL-STD 130 ATA 2000 standard of UID labels. All designs and the marks of the UID labels are authorized by the U.S. Government materiel purchases. The plain texts and the 2-dimentional data matrix barcodes help the government agencies to categorize all the government furnished assets. Factors that Determines the UID label Markings The marking of the items with UID labels is determined by some important factors. Nature of the items, their operational environment and their maintenance procedures are the prime factors that decide the marking methodologies. Secondly, the UID marking capability also depends on requirements of the manufacturers, the methods they follow and their technical expertise of making the parts. Of course, the marking technique of 2-D Data Matrix is compatible with all marking techniques. Benefits of UID Labels With the marking of the items with Unique Identification mark, it is easy for the the DoD to keep track of the availability of the equipments, acquisition of the items, their deployment and repair standards. The process also reduces the forging of items as well as the asset management cost. In a nutshell, the UID labels enhances the operational productivity.About the Author: ID-integration.com provides complete solutions for <a href="http://www.id-integration.com/">UID </a> and <a href="http://www.id-integration.com/">UID Labels</a> related needs. ID-integration.com also provides complete solutions to meet new DoD direct part marking requirements.Article Source: <a href="http://www.articlesbase.com/">ArticlesBase.com</a> - <a href="http://www.articlesbase.com/technology-articles/construction-basics-of-uid-labels--809835.html" title="Construction Basics Of Uid Labels ">Construction Basics Of Uid Labels </a>

About UID labels
The Department of Defense has devised the methodology of UID labels or Unique Identification labels as serializing and marking procedure to keep record of the defense related tangible assets. According to the authorization of DoD, all tangible personal as well as Government Furnished Property, issued on or after 1st January 2004, should be marked with UID labels. However, the DoD plans to mark all tangible as well as embedded assets with UID labels by 31st December 2010. As per the estimation of DoD only 20% of the UID markings will be part marked directly and the 80% will be on name plates or labels.

The contractors, supplying the items were also instructed to fill the UID marking registration by May 2006. The permanent UID labels are allowed by Mil-Std 130 standard. According to Mil-Std 130M Section 5.2.7.2.1, "marks that are acceptable as per the requirements for printing on label material in 5.2.7.2.2 shall be acceptable or alternately see appropriate tables in SAE AS9132 (the Aerospace Industry Marking Standard) for quality requirements."

The UID labels and the nameplates for the marking and identification of the items should have characteristics such as chemical resistant, chemical resistant, scratch resistant, non-removable. Moreover, they should be readable for the life of the item. The most commonly used materials for UID labels are brushed aluminum foil, polyester and polyimide. There are certain techniques such as laser etching and dot peening are done unto the UID labels to make them withstand the harsh environment condition.

The Item that Require UID Labels

As per the DoD mandate, there are certain specified items that require UID labels on them. The items
• That are serially managed
• That are mission essential
• Whose unit acquisition cost is $5,000 or more
• That are embedded and where it is necessary to have permanent identification

The construction basics of UID labels
While constructing the Unique Identification for the tangible items there are two basic methods that are essential to be followed.
Construct #1 carries information such as part no, serial no, item description
Construct #2 has serial no, original part number, lot number or batch number for embedded items
Both the construction process should strictly comply with MIL-STD 130 ATA 2000 standard of UID labels.

All designs and the marks of the UID labels are authorized by the U.S. Government materiel purchases. The plain texts and the 2-dimentional data matrix barcodes help the government agencies to categorize all the government furnished assets.

Factors that Determines the UID label Markings
The marking of the items with UID labels is determined by some important factors. Nature of the items, their operational environment and their maintenance procedures are the prime factors that decide the marking methodologies. Secondly, the UID marking capability also depends on requirements of the manufacturers, the methods they follow and their technical expertise of making the parts. Of course, the marking technique of 2-D Data Matrix is compatible with all marking techniques.

Benefits of UID Labels
With the marking of the items with Unique Identification mark, it is easy for the the DoD to keep track of the availability of the equipments, acquisition of the items, their deployment and repair standards. The process also reduces the forging of items as well as the asset management cost. In a nutshell, the UID labels enhances the operational productivity.

ID-integration.com provides complete solutions for UID and UID Labels related needs. ID-integration.com also provides complete solutions to meet new DoD direct part marking requirements.

Rate this Article:

0 / 5 stars - 0 vote(s)

Re-Publish

Article Source: http://www.articlesbase.com/technology-articles/construction-basics-of-uid-labels--809835.html

Article Tags: uid lables, uid, uid marking, tesa secure laser labels

Related Articles
Related Q&A

Latest Technology Articles
More from Id Integration

Analyzing Your Business through Risk Management Software

By: Ryan Frank | 01/12/2009
If you own your own business then you probably know what it costs you to run it and how to make a return. But what if you’re hemorrhaging money that you don’t even know about? Would you look in to a way to continue to drive profit without losing so much from your business? If your answer is yes, risk management software may be the best thing for your business.

Tips to Generate Personal Wind Power with Ease

By: Mr. Pom | 01/12/2009
Most people think that wind mills and personal wind power only belong to the rural parts. But the fact remains that these people have understood the power of using alternate sources of energy rather than the ones we get as they have large farm houses to run.

An Easy Method to Generate Alternate Energy Sources - DIY Wind Power

By: Mr. Pom | 01/12/2009
Have you not noticed the large processions that are carried out sometimes carrying save earth placards? Don’t you think you could also prove useful to this movement?

Utilize Wind Power for Homes – Save on Electricity Bills

By: Mr. Pom | 01/12/2009
Do you know the effects wind power for homes have on your life? There are tremendous impacts, the most important one being your electricity bills.

Make the Change by Using Renewable Wind Power

By: Mr. Pom | 01/12/2009
We have been learning since school that we need to protect the natural resources that are available. Are we taking the right steps towards it?

Utilizing Wind Generated Power – the Most Effective Energy Saving Effort

By: Mr. Pom | 01/12/2009
Man, has been utilizing wind generated power from centuries. From ages man has been harnessing wind energy.

Is Residential Wind Power Effective?

By: Mr. Pom | 01/12/2009
People have realized the use of alternate sources of energy like wind power, solar energy etc? This is brought about because of the huge electricity bill that they have to face every month.

Solar Power Generator – The Most Efficient Source of Energy

By: Mr. Pom | 01/12/2009
Have you realized why you have electricity bills that are just going over the top of your head every month? The reason is the fact that there is a shortage of natural fuels that actually go to make electricity.

Handling the complexity of the MIL-STD-130

By: Id Integration | 30/11/2009 | Technology
The Department of Defense (DoD) follows the MIL-STD-130, a set of standards that regulates the requirements and methods of identifying and tracking military property in their possession. This includes any property that is produced, issued or stored by or on behalf of the DoD.

DoD Identification Procedures: A Brief Summary of MIL-STD-130N

By: Id Integration | 30/11/2009 | Technology
The MIL-STD-130N is used by the Department of Defense as a set of standards to regulate the correct methods of keeping track of military property. Anything that passes through the hands of the Department of Defense should be marked in this way, in order to create consistency and a reliable way of tracking any property that passes through the Department's hands.

Defense Contracts and UID Compliance

By: Id Integration | 30/11/2009 | Technology
The Department of Defense (DoD) has a set of standards in place regarding the specific requirements for the marking, identification, and tracking of any property for which the military is responsible, including any item which they manufacture, store or issue.