Hammer mill installation instructions

Hammer Mill is assembled by Liming Heavy Industry after the supply, when the user receives a Hammer Mill checks should be carried out in order to eliminate the defects that occur during transport.
1, A manufacturing plant, supply of foundation drawing. Only that the arrangement of the breakers and motor location, users, and the actual situation with reference to the pattern design and installation plans.
2, Hammer Mill to be installed on a concrete foundation, the design should be considered the basis of nesting location.
3, in order to reduce the vibration, so as not to work the machine vibration generated by buildings, the middle of the machine and concrete foundation should be embedded in order to alleviate the vibration of hardwood pallets or other materials.
4, installation Hammer Mill, the motor and the rotor shaft of the center should ensure that straight, so as not to affect the coupling of elastic sleeve damage and cause premature bearing with the heat.
5, Hammer Mill transmission part of the right of the machine, but its location changes based on actual needs.

Structural characteristics of Circular Vibrating Screen

Circular vibrating screen trajectory can be used for a variety of screening operations. As a circular vibrating screen surface, so that the material surface continuously screen flip and loose, so a round vibrating screen has the following characteristics:
1, fine-grained level have the opportunity to move the lower fuel layer, and discharged through the sieve.
2, stuck in the sieve can be out of the material to prevent the sieve block.
3, screening efficiency.
4, according to the material particle size, you can change screen surface angle, thus changing the material velocity along the screen surface to improve the handling capacity of vibrating screen If no special requirements, according to inclination of 200 treatment plants supply.
5, for difficult to screen materials can make spindle turning, so that the direction of vibration in the opposite direction with the movement of materials, materials along the screen surface to reduce velocity in order to improve screening efficiency.