Skimoil, Built To Order BRUTE Marine Oil Water Separators

Oil water separator equipment has been a shipboard requirement since the 1970’s, but recently it has become evident that oil water separators have not been as effective as had been assumed.  Actual and alleged improper operation (sometimes called a Magic Pipe) of this equipment by shipboard crews has resulted in criminal prosecutions of engine room crew members in the United States and to a lesser extent in Europe.

Oily bilge water is almost an unavoidable product in ship operations. Bilge water that is generated in proximity to shipboard equipment (such as in the engine room) often contains oil.  Direct discharge of this water would result in undesirable transfer of waste oil to the marine environment. By international agreement under the MARPOL convention, most commercial vessels need to be fitted with an oily water separator to remove oil contaminants before bilge water is pumped overboard.  Overboard oil discharge is illegal.

The international shipping community in general, began requiring new ships and ships replacing separators (over 400 tons) to meet the new IMO MEPC 107(49) requirements in January of 2005.  This regulation requires removal of not only free oil as the previous regulation did, but also what is called “fluid C” or what is generally accepted and defined as “emulsions”.  SkimOil’s BRUTE  marine oil water separator is a rugged yet simple oil water separator, built from the ground up with quality components, in an ASME code shop to very tight standards.  New controls  technology make reliable automatic HOA operations a reality. These BRUTE separators meet all IMO/MEPC 107 (49) requirements  (USCG ABS/BV certified)  with a tough, simple, efficient and well built (in USA) marine oil water separator system.

Oil content monitors are now required to track results of separation.  This new requirement significantly raised the price of a bilge separator and limited the separators to choose from.  The BRUTE Series 107 marine oil separator, brings the toughest, most  practical and economical system available today to meet this new requirement.  The BRUTE separator filter exchange program makes it easy to replace and dispose of spent filters.  The filter media used is generic and readily available throughout North and South America.  

The new IMO MEPC 107(49) requirements do require that the oil content monitors are able to detect EVEN emulsified oils, reducing possible “illegal discharge of oils” over and above the 15 ppm limits.  Even for those not mandated to comply with IMO/MEPC 107 (49), the BRUTE 107 Series separator system provides a level of insurance against “illegal-over limit discharges”.

SkimOil Inc, works with companies who have problems dealing with, handling or disposing of oily / dirty water, providing workable alternatives for their maintenance, pollution control, operational and special waste disposal problems.  SkimOil oil skimmers and oil water separators are used in over 40 countries across the world.  SkimOil Inc BRUTE marine oil water separator systems are built to specifically address individual problems, needs and requirements,  by using existing specialty, unique and innovative equipment or technologies, modified, configured or otherwise packaged into SkimOil systems built to fit your specific needs.  It is clear that the best choice for a safe and approved marine oil and water separator is SkimOil Inc BRUTE #BBOWS 107 Series separator systems.

For more information about marine oil water separators by SkimOil Inc., please call (314) 579-9755, email at info@skimoil.com